[U-Boot] [PATCH 1/2 v2] pci/fsl_pci_init: Enable inbound PCI config cycles

Peter Tyser ptyser at xes-inc.com
Wed Oct 29 18:39:26 CET 2008


Add fsl_pci_config_unlock() function to enable a
PCI/PCIe interface configured in agent/endpoint mode to
respond to inbound PCI configuration cycles.

Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
Changes since v1:
- Made unlocking dependent on interface being agent/endpoint
- Moved new code to fsl_pci_config_unlock() function

 drivers/pci/fsl_pci_init.c |   29 +++++++++++++++++++++++++++++
 1 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 7625ccc..d811ac0 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -37,6 +37,11 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <pci.h>
 #include <asm/immap_fsl_pci.h>
 
+/* Freescale-specific PCI config registers */
+#define FSL_PCI_PBFR		0x44
+#define FSL_PCIE_CAP_ID		0x4c
+#define FSL_PCIE_CFG_RDY	0x4b0
+
 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 				pci_dev_t dev, int sub_bus);
 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
@@ -304,6 +309,30 @@ void fsl_pci_init(struct pci_controller *hose)
 	}
 }
 
+/* Enable inbound PCI config cycles for agent/endpoint interface */
+void fsl_pci_config_unlock(struct pci_controller *hose)
+{
+	pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
+	u8 agent;
+	u8 pcie_cap;
+	u16 pbfr;
+
+	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent);
+	if (!agent)
+		return;
+
+	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+	if (pcie_cap != 0x0) {
+		/* PCIe - set CFG_READY bit of Configuration Ready Register */
+		pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
+	} else {
+		/* PCI - clear ACL bit of PBFR */
+		pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
+		pbfr &= ~0x20;
+		pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr);
+	}
+}
+
 #ifdef CONFIG_OF_BOARD_SETUP
 #include <libfdt.h>
 #include <fdt_support.h>
-- 
1.6.0.2.GIT



More information about the U-Boot mailing list