[U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
Roman Mashak
romez777 at gmail.com
Tue Oct 14 08:27:52 CEST 2008
OMAP identification is implemented in 'cpuinfo.c' and located in
ARM926EJ-S directory. It makes sense to place this file in OMAP
specific subdirectory, i.e. cpu/arm926ejs/omap
Signed-off-by: Roman Mashak <romez777 at gmail.com>
---
cpu/arm926ejs/Makefile | 2 +-
cpu/arm926ejs/cpuinfo.c | 242 -------------------------------------------
cpu/arm926ejs/omap/Makefile | 2 +-
3 files changed, 2 insertions(+), 244 deletions(-)
diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile
index 0facce4..d5ac7d3 100644
--- a/cpu/arm926ejs/Makefile
+++ b/cpu/arm926ejs/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = interrupts.o cpu.o cpuinfo.o
+COBJS = interrupts.o cpu.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/cpuinfo.c
deleted file mode 100644
index 35ba7db..0000000
--- a/cpu/arm926ejs/cpuinfo.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * OMAP1 CPU identification code
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Tony Lindgren <tony at atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <command.h>
-#include <arm926ejs.h>
-
-#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP)
-
-#define omap_readw(x) *(volatile unsigned short *)(x)
-#define omap_readl(x) *(volatile unsigned long *)(x)
-
-#define OMAP_DIE_ID_0 0xfffe1800
-#define OMAP_DIE_ID_1 0xfffe1804
-#define OMAP_PRODUCTION_ID_0 0xfffe2000
-#define OMAP_PRODUCTION_ID_1 0xfffe2004
-#define OMAP32_ID_0 0xfffed400
-#define OMAP32_ID_1 0xfffed404
-
-struct omap_id {
- u16 jtag_id; /* Used to determine OMAP type */
- u8 die_rev; /* Processor revision */
- u32 omap_id; /* OMAP revision */
- u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] = {
- { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type =
0x03100000},
- { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type =
0x07300100},
- { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type =
0x07300300},
- { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type =
0x15100000},
- { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type =
0x16100000},
- { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type =
0x16110000},
- { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type =
0x16100c00},
- { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type =
0x16100d00},
- { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type =
0x1610ef00},
- { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type =
0x1610ef00},
- { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type =
0x16110000},
- { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type =
0x16110b00},
- { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type =
0x16110c00},
- { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type =
0x16212300},
- { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type =
0x16212300},
- { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type =
0x16212300},
- { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type =
0x17100000},
- { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type =
0x17100000},
- { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type =
0x17100000},
-};
-
-/*
- * Get OMAP type from PROD_ID.
- * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
- * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
- * Undocumented register in TEST BLOCK is used as fallback; This seems to
- * work on 1510, 1610 & 1710. The official way hopefully will work in future
- * processors.
- */
-static u16 omap_get_jtag_id(void)
-{
- u32 prod_id, omap_id;
-
- prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
- omap_id = omap_readl(OMAP32_ID_1);
-
- /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
- if (((prod_id >> 20) == 0) || (prod_id == omap_id))
- prod_id = 0;
- else
- prod_id &= 0xffff;
-
- if (prod_id)
- return prod_id;
-
- /* Use OMAP32_ID_1 as fallback */
- prod_id = ((omap_id >> 12) & 0xffff);
-
- return prod_id;
-}
-
-/*
- * Get OMAP revision from DIE_REV.
- * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
- * Undocumented register in the TEST BLOCK is used as fallback.
- * REVISIT: This does not seem to work on 1510
- */
-static u8 omap_get_die_rev(void)
-{
- u32 die_rev;
-
- die_rev = omap_readl(OMAP_DIE_ID_1);
-
- /* Check for broken OMAP_DIE_ID on early 1710 */
- if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
- die_rev = 0;
-
- die_rev = (die_rev >> 17) & 0xf;
- if (die_rev)
- return die_rev;
-
- die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
-
- return die_rev;
-}
-
-static unsigned long dpll1(void)
-{
- unsigned short pll_ctl_val = omap_readw(DPLL_CTL_REG);
- unsigned long rate;
-
- rate = CONFIG_SYS_CLK_FREQ; /* Base xtal rate */
- if (pll_ctl_val & 0x10) {
- /* PLL enabled, apply multiplier and divisor */
- if (pll_ctl_val & 0xf80)
- rate *= (pll_ctl_val & 0xf80) >> 7;
- rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
- } else {
- /* PLL disabled, apply bypass divisor */
- switch (pll_ctl_val & 0xc) {
- case 0:
- break;
- case 0x4:
- rate /= 2;
- break;
- default:
- rate /= 4;
- break;
- }
- }
-
- return rate;
-}
-
-static unsigned long armcore(void)
-{
- unsigned short arm_ckctl = omap_readw(ARM_CKCTL);
-
- return (dpll1() >> ((arm_ckctl & 0x0030) >> 4));
-}
-
-int print_cpuinfo (void)
-{
- int i;
- u16 jtag_id;
- u8 die_rev;
- u32 omap_id;
- u8 cpu_type;
- u32 system_serial_high;
- u32 system_serial_low;
- u32 system_rev = 0;
-
- jtag_id = omap_get_jtag_id();
- die_rev = omap_get_die_rev();
- omap_id = omap_readl(OMAP32_ID_0);
-
-#ifdef DEBUG
- printf("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
- printf("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
- omap_readl(OMAP_DIE_ID_1),
- (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
- printf("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
- printf("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
- omap_readl(OMAP_PRODUCTION_ID_1),
- omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
- printf("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
- printf("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
- printf("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
-#endif
-
- system_serial_high = omap_readl(OMAP_DIE_ID_0);
- system_serial_low = omap_readl(OMAP_DIE_ID_1);
-
- /* First check only the major version in a safe way */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (jtag_id == (omap_ids[i].jtag_id)) {
- system_rev = omap_ids[i].type;
- break;
- }
- }
-
- /* Check if we can find the die revision */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
- system_rev = omap_ids[i].type;
- break;
- }
- }
-
- /* Finally check also the omap_id */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (jtag_id == omap_ids[i].jtag_id
- && die_rev == omap_ids[i].die_rev
- && omap_id == omap_ids[i].omap_id) {
- system_rev = omap_ids[i].type;
- break;
- }
- }
-
- /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
- cpu_type = system_rev >> 24;
-
- switch (cpu_type) {
- case 0x07:
- system_rev |= 0x07;
- break;
- case 0x03:
- case 0x15:
- system_rev |= 0x15;
- break;
- case 0x16:
- case 0x17:
- system_rev |= 0x16;
- break;
- case 0x24:
- system_rev |= 0x24;
- break;
- default:
- printf("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
- }
-
- printf("CPU: OMAP%04x", system_rev >> 16);
- if ((system_rev >> 8) & 0xff)
- printf("%x", (system_rev >> 8) & 0xff);
-#ifdef DEBUG
- printf(" revision %i handled as %02xxx id: %08x%08x",
- die_rev, system_rev & 0xff, system_serial_low, system_serial_high);
-#endif
- printf(" at %ld.%01ld MHz (DPLL1=%ld.%01ld MHz)\n",
- armcore() / 1000000, (armcore() / 100000) % 10,
- dpll1() / 1000000, (dpll1() / 100000) % 10);
-
- return 0;
-}
-
-#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */
diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile
index c335d5c..92913b5 100644
--- a/cpu/arm926ejs/omap/Makefile
+++ b/cpu/arm926ejs/omap/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
-COBJS = timer.o
+COBJS = timer.o cpuinfo.c
SOBJS = reset.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
--
1.4.4.4
--
Roman Mashak
More information about the U-Boot
mailing list