[U-Boot] [PATCH v2 3/9] ColdFire: Remove platforms mii.c file

[Tsi-Chung Liew]

From: TsiChung Liew <Tsi-Chung.Liew at freescale.com>

Will use mcfmii.c driver in drivers/net rather than
keep creating new mii.c for each future platform.
Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
mii.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew at freescale.com>
---
 board/BuS/EB+MCF-EV123/Makefile    |    2 +-
 board/BuS/EB+MCF-EV123/mii.c       |  304 ---------------------------------
 board/cobra5272/Makefile           |    2 +-
 board/cobra5272/mii.c              |  303 ---------------------------------
 board/freescale/m5235evb/Makefile  |    2 +-
 board/freescale/m5235evb/mii.c     |  307 ----------------------------------
 board/freescale/m5271evb/Makefile  |    2 +-
 board/freescale/m5271evb/mii.c     |  303 ---------------------------------
 board/freescale/m5272c3/Makefile   |    2 +-
 board/freescale/m5272c3/mii.c      |  303 ---------------------------------
 board/freescale/m5275evb/Makefile  |    2 +-
 board/freescale/m5275evb/mii.c     |  319 -----------------------------------
 board/freescale/m5282evb/Makefile  |    2 +-
 board/freescale/m5282evb/mii.c     |  304 ---------------------------------
 board/freescale/m5329evb/Makefile  |    2 +-
 board/freescale/m5329evb/mii.c     |  306 ----------------------------------
 board/freescale/m5373evb/Makefile  |    2 +-
 board/freescale/m5373evb/mii.c     |  306 ----------------------------------
 board/freescale/m54451evb/Makefile |    2 +-
 board/freescale/m54451evb/mii.c    |  303 ---------------------------------
 board/freescale/m54455evb/Makefile |    2 +-
 board/freescale/m54455evb/mii.c    |  324 ------------------------------------
 board/freescale/m547xevb/Makefile  |    2 +-
 board/freescale/m547xevb/mii.c     |  322 -----------------------------------
 board/freescale/m548xevb/Makefile  |    2 +-
 board/freescale/m548xevb/mii.c     |  322 -----------------------------------
 board/idmr/Makefile                |    2 +-
 board/idmr/mii.c                   |  303 ---------------------------------
 28 files changed, 14 insertions(+), 4343 deletions(-)
 delete mode 100644 board/BuS/EB+MCF-EV123/mii.c
 delete mode 100644 board/cobra5272/mii.c
 delete mode 100644 board/freescale/m5235evb/mii.c
 delete mode 100644 board/freescale/m5271evb/mii.c
 delete mode 100644 board/freescale/m5272c3/mii.c
 delete mode 100644 board/freescale/m5275evb/mii.c
 delete mode 100644 board/freescale/m5282evb/mii.c
 delete mode 100644 board/freescale/m5329evb/mii.c
 delete mode 100644 board/freescale/m5373evb/mii.c
 delete mode 100644 board/freescale/m54451evb/mii.c
 delete mode 100644 board/freescale/m54455evb/mii.c
 delete mode 100644 board/freescale/m547xevb/mii.c
 delete mode 100644 board/freescale/m548xevb/mii.c
 delete mode 100644 board/idmr/mii.c

diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index ceeffa7..ed3ac07 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o
+COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c
deleted file mode 100644
index 7f92514..0000000
--- a/board/BuS/EB+MCF-EV123/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile
index be704b7..cf07cf4 100644
--- a/board/cobra5272/Makefile
+++ b/board/cobra5272/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c
deleted file mode 100644
index 161c694..0000000
--- a/board/cobra5272/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m5235evb/Makefile
+++ b/board/freescale/m5235evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c
deleted file mode 100644
index 5fbbd66..0000000
--- a/board/freescale/m5235evb/mii.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile
index 2ec71ee..424ab1c 100644
--- a/board/freescale/m5271evb/Makefile
+++ b/board/freescale/m5271evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5271evb/mii.c b/board/freescale/m5271evb/mii.c
deleted file mode 100644
index e79fa19..0000000
--- a/board/freescale/m5271evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
-	} else {
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5272c3/Makefile b/board/freescale/m5272c3/Makefile
index be704b7..cf07cf4 100644
--- a/board/freescale/m5272c3/Makefile
+++ b/board/freescale/m5272c3/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5272c3/mii.c b/board/freescale/m5272c3/mii.c
deleted file mode 100644
index 161c694..0000000
--- a/board/freescale/m5272c3/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m5275evb/Makefile
+++ b/board/freescale/m5275evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5275evb/mii.c b/board/freescale/m5275evb/mii.c
deleted file mode 100644
index 706d8d6..0000000
--- a/board/freescale/m5275evb/mii.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
-
-	if (setclear) {
-		/* Enable Ethernet pins */
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
-			gpio->par_feci2c |= 0x0F00;
-			gpio->par_fec0hl |= 0xC0;
-		} else {
-			gpio->par_feci2c |= 0x00A0;
-			gpio->par_fec1hl |= 0xC0;
-		}
-	} else {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
-			gpio->par_feci2c &= ~0x0F00;
-			gpio->par_fec0hl &= ~0xC0;
-		} else {
-			gpio->par_feci2c &= ~0x00A0;
-			gpio->par_fec1hl &= ~0xC0;
-		}
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif	/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5282evb/Makefile b/board/freescale/m5282evb/Makefile
index 2ec71ee..424ab1c 100644
--- a/board/freescale/m5282evb/Makefile
+++ b/board/freescale/m5282evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5282evb/mii.c b/board/freescale/m5282evb/mii.c
deleted file mode 100644
index 7f92514..0000000
--- a/board/freescale/m5282evb/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile
index ab0f11e..07b693c 100644
--- a/board/freescale/m5329evb/Makefile
+++ b/board/freescale/m5329evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c
deleted file mode 100644
index c0f5817..0000000
--- a/board/freescale/m5329evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile
index ab0f11e..07b693c 100644
--- a/board/freescale/m5373evb/Makefile
+++ b/board/freescale/m5373evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c
deleted file mode 100644
index c0f5817..0000000
--- a/board/freescale/m5373evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54451evb/Makefile
+++ b/board/freescale/m54451evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54451evb/mii.c b/board/freescale/m54451evb/mii.c
deleted file mode 100644
index 6e24736..0000000
--- a/board/freescale/m54451evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_KSZ8041NL	0x00221512
-#define STR_ID_KSZ8041NL	"KSZ8041NL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					strcpy(info->phy_name,
-					       STR_ID_KSZ8041NL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					printf(STR_ID_KSZ8041NL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c
deleted file mode 100644
index c195191..0000000
--- a/board/freescale/m54455evb/mii.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m547xevb/Makefile
+++ b/board/freescale/m547xevb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c
deleted file mode 100644
index 4d11506..0000000
--- a/board/freescale/m547xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m548xevb/Makefile
+++ b/board/freescale/m548xevb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c
deleted file mode 100644
index 4d11506..0000000
--- a/board/freescale/m548xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/idmr/Makefile b/board/idmr/Makefile
index be704b7..cf07cf4 100644
--- a/board/idmr/Makefile
+++ b/board/idmr/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
deleted file mode 100644
index e79fa19..0000000
--- a/board/idmr/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
-	} else {
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
-- 
1.5.6.4