[U-Boot] [PATCH] AT91: Replace (undefined) AT91_ID_US* by the board specific values.
Stelian Pop
stelian at popies.net
Tue Oct 21 18:08:01 CEST 2008
AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
Since they are never used outside the board specific files, they can
be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
AT91xxx_ID_US2.
Bug spotted by Jesus Alvarez <jalvarez at micromint.com>.
Signed-off-by: Stelian Pop <stelian at popies.net>
---
board/atmel/at91cap9adk/at91cap9adk.c | 6 +++---
board/atmel/at91sam9260ek/at91sam9260ek.c | 6 +++---
board/atmel/at91sam9261ek/at91sam9261ek.c | 6 +++---
board/atmel/at91sam9263ek/at91sam9263ek.c | 6 +++---
board/atmel/at91sam9rlek/at91sam9rlek.c | 6 +++---
5 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 0f39de6..57fe617 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -52,19 +52,19 @@ static void at91cap9_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 25a33b2..ca1f11a 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -48,19 +48,19 @@ static void at91sam9260ek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 647aab5..436f041 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -48,19 +48,19 @@ static void at91sam9261ek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index f5718df..3de6b81 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -51,19 +51,19 @@ static void at91sam9263ek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 509e7c3..5869ae2 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -48,19 +48,19 @@ static void at91sam9rlek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
--
1.5.4.3
More information about the U-Boot
mailing list