[U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405(v3)

Ricardo Ribalda Delgado ricardo.ribalda at uam.es
Tue Oct 21 18:29:46 CEST 2008


As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
ppc440 boards, this patch presents a common architecture for all the
xilinx ppc405 boards.

Any custom xilinx ppc405 board can be added very easily with no code
duplicity.

This patch also adds a simple generic board, that can be used on almost
any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h

This patch is prepared to work with the latest version of EDK (10.1)

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at uam.es>
---
v2
Includes changes propossed by Stefan Roese

-Remove unneeded init.S
-PPC404 ->PPC405
v3
rebased to ppc4xx/master

 CREDITS                                            |    1 +
 MAINTAINERS                                        |    1 +
 Makefile                                           |   16 ++
 board/xilinx/ppc405-generic/.gitignore             |    1 +
 board/xilinx/ppc405-generic/Makefile               |   60 ++++++++
 board/xilinx/ppc405-generic/config.mk              |   25 ++++
 board/xilinx/ppc405-generic/u-boot-ram.lds         |  134 ++++++++++++++++++
 board/xilinx/ppc405-generic/u-boot-rom.lds         |  144 ++++++++++++++++++++
 .../xilinx/ppc405-generic/xilinx_ppc405_generic.c  |   59 ++++++++
 board/xilinx/ppc405-generic/xparameters.h          |   36 +++++
 cpu/ppc4xx/start.S                                 |    3 +-
 include/configs/xilinx-ppc405-generic.h            |   58 ++++++++
 include/configs/xilinx-ppc405.h                    |  126 +++++++++++++++++
 13 files changed, 663 insertions(+), 1 deletions(-)
 create mode 100644 board/xilinx/ppc405-generic/.gitignore
 create mode 100644 board/xilinx/ppc405-generic/Makefile
 create mode 100644 board/xilinx/ppc405-generic/config.mk
 create mode 100644 board/xilinx/ppc405-generic/u-boot-ram.lds
 create mode 100644 board/xilinx/ppc405-generic/u-boot-rom.lds
 create mode 100644 board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
 create mode 100644 board/xilinx/ppc405-generic/xparameters.h
 create mode 100644 include/configs/xilinx-ppc405-generic.h
 create mode 100644 include/configs/xilinx-ppc405.h

diff --git a/CREDITS b/CREDITS
index 3767322..9ddf0d2 100644
--- a/CREDITS
+++ b/CREDITS
@@ -407,6 +407,7 @@ N: Ricardo Ribalda Delgado
 E: ricardo.ribalda at uam.es
 D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
 D: Virtex ppc440 generic architecture
+D: Virtex ppc405 generic architecture
 W: http://www.ii.uam.es/~rribalda
 
 N: Stefan Roese
diff --git a/MAINTAINERS b/MAINTAINERS
index 60cb6a6..a5d1038 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -320,6 +320,7 @@ Ricardo Ribalda <ricardo.ribalda at uam.es>
 	ml507 		PPC440x5
 	v5fx30teval	PPC440x5
 	xilinx-pp440-generic	PPC440x5
+	xilinx-pp405-generic	PPC405
 
 Stefan Roese <sr at denx.de>
 
diff --git a/Makefile b/Makefile
index fceb8a2..66922eb 100644
--- a/Makefile
+++ b/Makefile
@@ -1518,6 +1518,22 @@ sycamore_config: unconfig
 WUH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
 
+xilinx-ppc405-generic_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
+xilinx-ppc405-generic_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@echo "TEXT_BASE := 0x04000000" \
+		>> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
 xilinx-ppc440-generic_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore
new file mode 100644
index 0000000..b644f59
--- /dev/null
+++ b/board/xilinx/ppc405-generic/.gitignore
@@ -0,0 +1 @@
+config.tmp
diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile
new file mode 100644
index 0000000..b56bb49
--- /dev/null
+++ b/board/xilinx/ppc405-generic/Makefile
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+endif
+
+INCS		:=
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	+= ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk
new file mode 100644
index 0000000..6d76755
--- /dev/null
+++ b/board/xilinx/ppc405-generic/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
diff --git a/board/xilinx/ppc405-generic/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds
new file mode 100644
index 0000000..0004d61
--- /dev/null
+++ b/board/xilinx/ppc405-generic/u-boot-ram.lds
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/xilinx/ppc405-generic/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds
new file mode 100644
index 0000000..d2bac9f
--- /dev/null
+++ b/board/xilinx/ppc405-generic/u-boot-rom.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
new file mode 100644
index 0000000..9bd1770
--- /dev/null
+++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+ulong __get_PCI_freq(void)
+{
+	return 0;
+}
+
+ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq")));
+
+int __board_pre_init(void)
+{
+	return 0;
+}
+int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
+
+int __checkboard(void)
+{
+	puts("Xilinx PPC405 Generic Board\n");
+	return 0;
+}
+int checkboard(void) __attribute__((weak, alias("__checkboard")));
+
+phys_size_t __initdram(int board_type)
+{
+	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
+			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
+}
+phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
+
+void __get_sys_info(sys_info_t *sysInfo)
+{
+	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sysInfo->freqPCI = 0;
+
+	return;
+}
+void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h
new file mode 100644
index 0000000..e8e8ced
--- /dev/null
+++ b/board/xilinx/ppc405-generic/xparameters.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters-ml507.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_SPI_0_BASEADDR             0x83400000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+#define XPAR_SPI_0_NUM_TRANSFER_BITS	8
+
+#endif
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 31902a0..882ef21 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -918,7 +918,8 @@ _start:
 	ori	r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE at l
 	mtdccr	r4
 
-#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
+				&& !defined (CONFIG_XILINX_405)
 	/*----------------------------------------------------------------------- */
 	/* Tune the speed and size for flash CS0  */
 	/*----------------------------------------------------------------------- */
diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h
new file mode 100644
index 0000000..5036c62
--- /dev/null
+++ b/include/configs/xilinx-ppc405-generic.h
@@ -0,0 +1,58 @@
+/*
+ *
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ *
+ * (C) Copyright 2008
+ * Georg Schardt <schardt at team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_GEN_H
+#define __CONFIG_GEN_H
+
+#include "../board/xilinx/ppc405-generic/xparameters.h"
+
+/* sdram */
+#define CONFIG_SYS_SDRAM_SIZE_MB	256
+
+/* environment */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			0x10000
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#define CONFIG_SYS_ENV_OFFSET		0x3F0000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
+#define CONFIG_ENV_OVERWRITE		1
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT	"xlx-ppc405:/# " /* Monitor Command Prompt */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define CONFIG_SYS_FLASH_BASE			XPAR_FLASH_MEM0_BASEADDR
+#define CONFIG_SYS_FLASH_SIZE		(32*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT	71
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define MTDIDS_DEFAULT			"nor0=ppc405-flash"
+#define MTDPARTS_DEFAULT		"mtdpartsa=ppc405-flash:-(user)"
+
+#include <configs/xilinx-ppc405.h>
+#endif			/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h
new file mode 100644
index 0000000..7458470
--- /dev/null
+++ b/include/configs/xilinx-ppc405.h
@@ -0,0 +1,126 @@
+/*
+ *
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ *
+ * (C) Copyright 2008
+ * Georg Schardt <schardt at team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* cpu parameter */
+#define CONFIG_4xx		1
+#define CONFIG_405		1
+#define CONFIG_XILINX_405	1
+
+/* memory map */
+#define CONFIG_SYS_SDRAM_BASE	0x0
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN	(192 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128 * 1024)
+
+/* u-boot commands configuration */
+#include <config_cmd_default.h>
+
+/*Misc*/
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
+		+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END	0x00C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_LOAD_ADDR	0x01000000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO	1	/* Extended board_into (bd_t) */
+#define CONFIG_SYS_HZ		1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING		/* add command line history */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
+#define CONFIG_LOOPW			/* enable loopw command */
+#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE		/* include version env variable */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
+#define CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_LOADS_ECHO		/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
+					/* Initial Memory map for Linux */
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SHIFT	2
+
+/* stack */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x800000 /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END		0x2000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+		CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_FLASH_CF		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/* serial communication */
+#ifdef XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_XILINX_UARTLITE
+#define CONFIG_SERIAL_BASE		XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_BAUDRATE			XPAR_UARTLITE_0_BAUDRATE
+#define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
+#else
+#ifdef XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550_CLK		XPAR_UARTNS550_0_CLOCK_FREQ_HZ
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 115200 }
+#endif
+#endif
+
+/* cmd config */
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IMLS
+
+#endif
-- 
1.5.6.5



More information about the U-Boot mailing list