[U-Boot] [PATCH 3/5] 86xx: remove the second DDR LAW setting for mpc8641hpcn

Dave Liu daveliu at freescale.com
Tue Oct 28 10:46:35 CET 2008


The DDR1 LAW will precedence the DDR2 LAW, so remove
the second DDR LAW.

Signed-off-by: Dave Liu <daveliu at freescale.com>
---
 board/freescale/mpc8641hpcn/law.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 182b4c5..8e13728 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -55,9 +55,6 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
 	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW((CONFIG_SYS_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-#endif
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
-- 
1.5.4



More information about the U-Boot mailing list