[U-Boot] [PATCH] MIMC200 board now uses CONFIG_DISABLE_CONSOLE

[Mark Jackson]

Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
Also fixed default uImage location.

Signed-off-by: Mark Jackson <mpfj at mimc.co.uk>

---

 board/mimc/mimc200/mimc200.c |    2 +-
 include/configs/mimc200.h    |    6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 8516dcb..fd497b2 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -82,7 +82,7 @@ int board_early_init_f(void)
 
 	/* are we suppressing the console ? */
 	if (gpio_get_value(GPIO_PIN_PE21) == 1)
-		gd->flags |= GD_FLG_SILENT;
+		gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
 
 	/* reset phys */
 	gpio_select_pio(GPIO_PIN_PE24, 0);
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index da307ac..0345b4a 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -74,12 +74,12 @@
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
-	"console=ttyS0 root=/dev/mtdblock1 fbmem=600k rootfstype=jffs2"
+	"root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS1"
 #define CONFIG_BOOTCOMMAND						\
-	"fsload; bootm"
+	"fsload boot/uImage; bootm"
 
 #define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
-#define CONFIG_SILENT_CONSOLE_INPUT	1	/* disable console inputs */
+#define CONFIG_DISABLE_CONSOLE		1	/* disable console */
 #define CFG_DEVICE_NULLDEV		1	/* include nulldev device */
 
 /*