[U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.

[Nishanth Menon]

Radha Krishna said the following on 10/17/2008 07:53 PM:
> I am doing U-boot for TI3430 boad.
>
> Step 0: make distclean   //worked fine
> Step 1: make CROSS_COMPILE=arm-none-linux-gnueabi- omap3430sdp_config //worked fine
> Step 2: make CROSS_COMPILE=arm-none-linux-gnueabi-   //Error
>
> [SNIP]
> $ make CROSS_COMPILE=arm-none-linux-gnueabi-
> make: arm-none-linux-gnueabi-gcc: Command not found
> make[1]: arm-none-linux-gnueabi-gcc: Command not found
> make[1]: Entering directory `/cygdrive/c/u-boot/tools'
> make[1]: Entering directory `/cygdrive/c/u-boot/tools'
Step using windows and try using a *real* Linux environment such as a
vmware[4] or an Linux PC to build. I suspect you are taking code from
[1]. in which case code sourcery gcc [2] will be good. Further, you need
to say ARCH=ARM as part of your compilation command.

By the way, there are many "TI3430" boards. from your defconfig I
understand it is for SDP3430[3]. I had written a small quick start doc
for 2430 - many of whose comments are still valid for 2430.
Regards,
Nishanth Menon
[1] http://linux.omap.com/pub/bootloader/3430sdp/  or
https://omapzoom.org/gf/
[2]
http://www.codesourcery.com/gnu_toolchains/arm/portal/subscription?@template=lite
[3] http://www.ti.com/omap3430_devplatform
[4] http://www.vmware.com/download/player/ and as an example:
http://search-www.vmware.com/socialsearch/query?cn=vmware&cc=www&ie=UTF-8&oe=UTF-8&q=ubuntu+8.04&x=0&y=0
choose the appliance you like, download the image and run it..
[5]
http://www.geocities.com/crecmca98/Linux/omap2430_From_almost_scratch.pdf