[U-Boot] [PATCH 4/6] Add debug information for DDR controller registers
Haiying Wang
Haiying.Wang at freescale.com
Fri Oct 3 18:37:26 CEST 2008
Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
---
cpu/mpc8xxx/ddr/ctrl_regs.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c
index 6297141..1783e92 100644
--- a/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -111,6 +111,7 @@ static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
| ((row_bits_cs_n & 0x7) << 8)
| ((col_bits_cs_n & 0x7) << 0)
);
+ debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
}
/* Chip Select Configuration 2 (CSn_CONFIG_2) */
@@ -120,6 +121,7 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
unsigned int pasr_cfg = 0; /* Partial array self refresh config */
ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
+ debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
}
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
@@ -190,6 +192,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
| ((ext_caslat & 0x1) << 12)
| ((cntl_adj & 0x7) << 0)
);
+ debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
}
/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
@@ -257,6 +260,7 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
| ((acttoact_mclk & 0x07) << 4)
| ((wrtord_mclk & 0x07) << 0)
);
+ debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
}
/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
@@ -313,6 +317,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
| ((cke_pls & 0x7) << 6)
| ((four_act & 0x1f) << 0)
);
+ debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
}
/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
@@ -379,6 +384,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
| ((mem_halt & 0x1) << 1)
| ((bi & 0x1) << 0)
);
+ debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
}
/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
@@ -443,6 +449,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
| ((rcw_en & 0x1) << 2)
| ((md_en & 0x1) << 0)
);
+ debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
}
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
@@ -455,6 +462,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr)
| ((esdmode2 & 0xFFFF) << 16)
| ((esdmode3 & 0xFFFF) << 0)
);
+ debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
}
/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
@@ -474,6 +482,7 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
| ((refint & 0xFFFF) << 16)
| ((bstopre & 0x3FFF) << 0)
);
+ debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
}
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
@@ -607,6 +616,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
| ((esdmode & 0xFFFF) << 16)
| ((sdmode & 0xFFFF) << 0)
);
+ debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
}
@@ -669,6 +679,7 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr)
| ((wwt & 0xf) << 16)
| (dll_lock & 0x3)
);
+ debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
}
/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
@@ -685,6 +696,7 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
| ((wodt_on & 0xf) << 12)
| ((wodt_off & 0xf) << 8)
);
+ debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
}
/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
@@ -992,6 +1004,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
| ((ea & 0xFFF) << 0) /* ending address MSB */
);
+ debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
set_csn_config(i, ddr, popts, dimm_params);
set_csn_config_2(i, ddr);
}
--
1.6.0.2
More information about the U-Boot
mailing list