[U-Boot] [PATCH 1/4] Make pixis_set_sgmii more general to support MPC85xx boards.

[Andy Fleming]

On Thu, Oct 9, 2008 at 10:40 PM, Jason Jin <Jason.jin at freescale.com> wrote:
> From: Liu Yu <yu.liu at freescale.com>
>
> The pixis sgmii command depend on the FPGA support on the board, some 85xx
> boards support SGMII riser card but did not support this command, define
> CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
>
> Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
> are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
> PIXIS_VCFGEN1_MASK in header file for both boards.
>
> Signed-off-by: Liu Yu <yu.liu at freescale.com>

Applied to 85xx-next