[U-Boot] Burning U-boot on 460EX using BDI3000

[Victor Gallardo]

Hi Felix,

Here is my BDI configuration file for Canyonlands.

This one should work for you. This one configures OCM instead DDR.

-Victor Gallardo


-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
On Behalf Of Felix Radensky
Sent: Monday, September 01, 2008 9:43 AM
To: U-Boot
Subject: [U-Boot] Burning U-boot on 460EX using BDI3000

Hi,

Can U-boot be burned on 460EX based board (using BDI3000) without
configuring DDR controller ? The BDI configuration file for Canyonlands
board on Denx site
http://www.denx.de/wiki/view/DULG/Appendix#Section_13.1.
has no DDR setup, but also doesn't work on Canyonlands (fails on flash
erase). The configuration file from AMCC site does work, but it contains
full DDR setup.

Thanks a lot.

Felix.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: amcc_evb460ex.cfg
Type: application/octet-stream
Size: 3808 bytes
Desc: amcc_evb460ex.cfg
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080901/23902056/attachment.obj