[U-Boot] [PATCH v3 0/6] i.MX31: Add NAND support and new PDK board.

[Magnus Lilja]

Hi,

2008/8/29 Magnus Lilja <lilja.magnus at gmail.com>:
> Hi again
>
> This series of patches adds support for the NAND flash controller in the
> i.MX31 device and also introduces the Freescale i.MX31 PDK board.
>
> Changes since v2:
>
> - Added doc/README.mx31 (contains MC13783 SPI config documentation)
> - Split the PDK patch into two patches, the first introduces the
> board without NAND support, the second adds NAND support.
> - Re-ordered the series so the NAND patches are placed last
> - mx31_nand.c has been updated w.r.t. coding style.
> - There are still issues with the NAND driver (i.e. not all comments from
> Scott Wood have been taken care of yet). Therefore I suspect that the
> NAND driver is not ready for inclusion yet, the other patches should be
> OK.
>
> The patches are based on the current main U-boot git repo (as of
> Friday morning).


Is there are chance that the first couple of patches in the series can
be merged into the official tree? I'm talking about the following
patches:
[PATCH v3 1/6] i.MX31: Add reset_timer() and modify get_timer_masked().
[PATCH v3 2/6] i.MX31: Make the SPI bus and chip select configurable for MC13783
[PATCH v3 3/6] i.MX31: Add basic support for Freescale's i.MX31 PDK board.

The rest of the patches in the series depends on the i.MX31 NAND
driver and I'm not able to fix the issues in the immediate future so
that'll have to wait.


Regards, Magnus