[U-Boot] u-boot-v2 for imx27 Board

[Lejin K Joy]

Hi,

I was running U-boot-v2 on imx27ads board and it's hanging up on the
terminal after the following display. 

--------
U-Boot 2.0.0-rc5-git (Sep 22 2008 - 23:05:39)

Board: Freescale i.MX27 ADS
---------

Also I am using Intel P30 strata flash. When the MTD cfi driver is enabled
in the menuconfig U-boot gives the following message and hangs up.

------------
U-Boot 2.0.0-rc5-git (Sep 22 2008 - 23:05:39)

Board: Freescale i.MX27 ADS
cfi_probe: cfi_flash base: 0xc0000000 size: 0x02000000
------------

Please provide your suggestions.


Thanks,
Lejin


-----Original Message-----
From: Robert Schwebel [mailto:r.schwebel at pengutronix.de] 
Sent: Friday, August 22, 2008 12:17 AM
To: Lejin K Joy
Cc: 'Sascha Hauer'; u-boot at lists.denx.de
Subject: Re: [U-Boot] u-boot for imx27 Board

Hi,

On Thu, Aug 21, 2008 at 09:43:53PM +0530, Lejin K Joy wrote:
> Could you kindly suggest me the arm cross compiler's link /name using
> which you have compiled the u-boot. I am using
> obsolete-gcc-3.3.2.tar.bz2 compiler. 

We usually build the MX27 stuff with a generic arm-v4 cross toolchain,
built with OSELAS.Toolchain-1.1.1. You can compile such a toolchain
yourself easily with ptxdist, look here for the details:

http://www.pengutronix.de/oselas/toolchain/index_en.html

rsc
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9