[U-Boot] Uboot-1.2.0 on MPC8360EMDS board

[Wolfgang Denk]

Dear Mike,

In message <5c9cd53b0809231157qd73f6e5kd73a5a0a80d1f525 at mail.gmail.com> you wrote:
> 
> I am having problem when I try to bootup MPC8360EMDS with Uboot1.2.
> The following are logs. The board reboot when the uboot tried to run
> on the RAM. Any idea on this issue?
...
> U-Boot 1.2.1 (Sep 23 2008 - 14:35:42) MPC83XX

It's difficult to say anything when ewven the minimal information you
provide is unreliable - the subject says "Uboot-1.2.0", later you
write "Uboot1.2", and now we see "U-Boot 1.2.1". I think you should
know exactly which version you ar running.

In any case: all of these versions are extremely old. Please use
current code instead.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The X11 source code style is ATROCIOUS and should not be used  as  a
model."                                                   - Doug Gwyn