[U-Boot] [PATCH] ZOOM2 Add initial support for Zoom2
Tom
Tom.Rix at windriver.com
Thu Apr 2 02:53:42 CEST 2009
Wolfgang Denk wrote:
> Dear Tom Rix,
>
> In message <1238602273-27252-1-git-send-email-Tom.Rix at windriver.com> you wrote:
>
>> Zoom2 is a new board from Texas Instruments and LogicPD
>> This is the product description
>> http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
>>
>> This patch provides a zoom2 base target by copying zoom1 and by making some
>> obvious changes. This target compiles but does not yet run.
>>
>> To configure, run
>> make omap3_zoom2_config
>>
> ...
>
>> diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c
>> new file mode 100644
>> index 0000000..f861691
>> --- /dev/null
>> +++ b/board/omap3/zoom2/zoom2.c
>>
> ...
>
>> +/******************************************************************************
>> + * Routine: board_init
>> + * Description: Early hardware init.
>> + *****************************************************************************/
>>
>
> Here and everywhere else: incorrect multiline comment style. Please
> fix everywhere.
>
>
>
This is common in all the omap3 board files.
I will fix these as well.
>> diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
>> new file mode 100644
>> index 0000000..9ea8ea0
>>
> ...
>
>> +/* Clock Defines */
>> +#define V_OSCK 26000000 /* Clock output from T2 */
>>
>
> Here and in some other places: line too long. Please fix everywhere.
>
>
>
>
OK
> Best regards,
>
> Wolfgang Denk
>
>
More information about the U-Boot
mailing list