[U-Boot] [PATCH 2/8] ZOOM2 Mux changes to support zoom2 configuration.
Tom Rix
Tom.Rix at windriver.com
Thu Apr 2 05:02:15 CEST 2009
Signed-off-by: Tom Rix <Tom.Rix at windriver.com>
---
board/omap3/zoom2/zoom2.h | 20 +++++++++++++++++++-
1 files changed, 19 insertions(+), 1 deletions(-)
diff --git a/board/omap3/zoom2/zoom2.h b/board/omap3/zoom2/zoom2.h
index c86d990..3807634 100644
--- a/board/omap3/zoom2/zoom2.h
+++ b/board/omap3/zoom2/zoom2.h
@@ -129,6 +129,24 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_WAIT0), (IEN | PTD | EN | M0)) /*GPMC_WAIT0*/\
MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\
+ /* IDCC modem Power On */ \
+ MUX_VAL(CP(CAM_D11), (IEN | PTU | EN | M4)) /*GPIO_110*/\
+ MUX_VAL(CP(CAM_D4), (IEN | PTU | EN | M4)) /*GPIO_103 */\
+ /* GPMC CS7 has LAN9211 device */\
+ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M4)) /*LAN9221*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M0)) /*MCSPI1_CS2*/\
+ /* GPMC CS3 has Serial TL16CP754C device */\
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
+ /* Toggle Reset pin of TL16CP754C device */\
+ MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTU | EN | M4)) /*GPIO_152*/\
+ udelay(10);\
+ MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | EN | M4)) /*GPIO_152*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*SDRC_CKE1*/\
+ /* LEDS */\
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | EN | M4)) /*GPIO_173 red */\
+ MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | EN | M4)) /*GPIO_154 blue */\
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | EN | M4)) /*GPIO_61 blue2 */
#endif /* _BOARD_ZOOM2_H_ */
--
1.6.0.5
More information about the U-Boot
mailing list