[U-Boot] [PATCH 1/8] ZOOM2 Add initial support for Zoom2

[Tom]

Dirk Behme wrote:
> Hi Tom,
>
> Tom Rix wrote:
>> Zoom2 is a new board from Texas Instruments and LogicPD
>> This is the product description
>> http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp 
>>
>>
>> This patch provides a zoom2 base target by copying zoom1 and by 
>> making some
>> obvious changes. This target compiles but does not yet run.
>>
>> To configure, run
>> make omap3_zoom2_config
>>
>> Signed-off-by: Tom Rix <Tom.Rix at windriver.com>
>> ---
>> MAINTAINERS | 4 +
>> MAKEALL | 1 +
>> Makefile | 3 +
>> board/omap3/common/Makefile | 1 +
>> board/omap3/zoom2/Makefile | 49 +++++++
>> board/omap3/zoom2/config.mk | 33 +++++
>> board/omap3/zoom2/u-boot.lds | 63 +++++++++
>> board/omap3/zoom2/zoom2.c | 79 +++++++++++
>> board/omap3/zoom2/zoom2.h | 134 ++++++++++++++++++
>> include/configs/omap3_zoom2.h | 311 
>> +++++++++++++++++++++++++++++++++++++++++
>
> I'm not sure if I overlooked it in one of the other patches, but if 
> not: Do you like to update
>
> doc/README.omap3
>
> too?
>
Yes. I will do this.
Tom

> Best regards
>
> Dirk