[U-Boot] [PATCH v2] Marvell MV88F6281GTW_GE Board support

[Prafulla Wadaskar]

> >>> +#define CONFIG_IPADDR		192.168.5.44
> >>> +#define CONFIG_SERVERIP		192.168.5.30
> >>> +#define CONFIG_NETMASK		255.255.255.0
> >>>       
> >> please remove the IP params
> >>     
> > Why ?
> >
> >   
> Because these values are only relevant to your lab network, 
> not anybody else who's going to use your boards. Boards 
> should start with a clean slate. This is a hard rule that 
> we've been enforcing for a while now - no address or network 
> parameter initializations in config files.
Thanks Ben for clarification.

Regards..
Prafulla . .