[U-Boot] BMP display.

[Premi, Sanjeev]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Tuma
> Sent: Monday, August 17, 2009 7:26 PM
> To: Wolfgang Denk; U-Boot Mailing List
> Subject: Re: [U-Boot] BMP display.
> 
> On Monday 17 August 2009 16:38:31 you wrote:
> > Dear Tuma,
> >
> > again: please keep the mailing list on Cc: !!!
> >
> > In message <200908171631.17975.chernigovskiy at spb.gs.ru> you wrote:
> > > Okay. Is new version configurable for OMAP3evm out of the box?
> >
> > Yes.
> >
> > > And is the v2009.08-rc2 stable enought?
> >
> > Yes.
> 
> Thank you. I've downloaded new U-Boot 2009.08.rc2.
> I have some error while making it.
> I do:
> make distclean  (Okay)
> make omap3_evm_config  (Okay)
> make
> 
> And get:
> 
> make[1]: arm-linux-gcc: Command not found
> 
> My old U-Boot used "arm-none-linux-gnueabi-gcc" which make 
> system could easyly 
> find on my system.
> Should I install some new software to build new U-Boot?
> Or configure existing Makefile?

Can you try:
make CROSS_COMPILE=arm-none-linux-gnueabi-

> 
> 
> > Best regards,
> >
> > Wolfgang Denk
> 
> 
> 
> -- 
> Software Developer
> General Satellite Corp.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
>