[U-Boot] init exits with signal 11

Tue Aug 18 11:16:25 CEST 2009

Hi,
Thanks a lot. I tried the same but it still gives me the same error. These
are the one that gets displayed.

## Booting image at 00200000 ...
   Image Name:   Linux-2.6.21
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1311814 Bytes =  1.3 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 01000000 ...
   Image Name:   Rootfs Test
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5046516 Bytes =  4.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 0522f000, end 056ff0f4 ... OK
[    0.000000] Linux version 2.6.21 (root at cheuxeri002) (gcc version 4.1.2
(Wind River Linux Sourcery G++ 4.1-91)) #21 PREEMPT Tue Aug 18 12:9
[    0.000000] AMCC PowerPC 440EP Yosemite Platform
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->    32768
[    0.000000]   Normal      32768 ->    32768
[    0.000000]   HighMem     32768 ->    32768
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    32768
[    0.000000] Built 1 zonelists.  Total pages: 32512
[    0.000000] Kernel command line: mem=128M console=ttyS0,115200
root=/dev/ram rw init=/sbin/linuxrc panic=3 loglevel=7
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000076] Console: colour dummy device 80x25
[    0.068076] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[    0.075516] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.094408] Memory: 121756k available (1936k kernel code, 1044k data,
108k init, 0k highmem)
[    0.192156] Mount-cache hash table entries: 512
[    0.198250] NET: Registered protocol family 16
[    0.208218] PCI: Probing PCI hardware
[    0.222329] NET: Registered protocol family 2
[    0.252127] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[    0.259225] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[    0.266431] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.272964] TCP: Hash tables configured (established 4096 bind 4096)
[    0.279324] TCP reno registered
[    0.292438] checking if image is initramfs...it isn't (no cpio magic);
looks like an initrd
[    1.770630] Freeing initrd memory: 4928k freed
[    1.777422] io scheduler noop registered
[    1.781425] io scheduler cfq registered (default)
[    2.071072] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing disabled
[    2.079365] serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
[    2.086089] serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
[    2.092844] serial8250: ttyS2 at MMIO 0x0 (irq = 3) is a 16550A
[    2.099560] serial8250: ttyS3 at MMIO 0x0 (irq = 4) is a 16550A
[    2.112918] RAMDISK driver initialized: 16 RAM disks of 60000K size 1024
blocksize
[    2.123495] loop: loaded (max 8 devices)
[    2.127779] nbd: registered device at major 43
[    2.139752] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[    2.145851] Copyright (c) 1999-2006 Intel Corporation.
[    2.151342] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[    2.157475] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.165232] forcedeth.c: Reverse Engineered nForce ethernet driver.
Version 0.60.
[    2.173761] tun: Universal TUN/TAP device driver, 1.6
[    2.178855] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    2.186097] netconsole: not configured, aborting
[    2.191571] i8042.c: No controller found.
[    2.195900] mice: PS/2 mouse device common for all mice
[    2.201261] TCP cubic registered
[    2.204537] NET: Registered protocol family 1
[    2.208917] NET: Registered protocol family 17
[    2.213856] RAMDISK: Compressed image found at block 0
[    4.018906] DEBUG:Going to mount file system
[    4.023591] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[    4.031412] VFS: Mounted root (ext2 filesystem).
[    4.036073] DEBUG:printing the filesystem name
[    4.040534] DEBUG:Mount root returned
[    4.044299] DEBUG:sys_mount returned
[    4.047887] DEBUG:sys_chroot returned
[    4.051557] DEBUG:security_sb_post_mountroot returned
[    4.056619] DEBUG:FILE SYSTEM mounted
[    4.060290] Freeing unused kernel memory: 108k init
[    4.065242] DEBUG:free_initmem
[    4.068302] DEBUG:unlock_kernel
[    4.071449] DEBUG:mark_rodata_ro
[    4.074692] DEBUG:numa_default_policy
[    4.078661] DEBUG:console opened successfully
[    4.083059] DEBUG:sys_dup executed twice
[    4.086991] DEBUG:value of ramdisk_execute_command <NULL>
[    4.092401] DEBUG:run_init_process
[    4.095808] DEBUG:Value of execute_command /sbin/linuxrc
[    4.101133] DEBUG:run_init_process start
[    4.106288] init has generated signal 11 but has no handler for it
[    4.112525] Kernel panic - not syncing: Attempted to kill init!
[    4.118461] Rebooting in 3 seconds..

My /etc doesnt have this ld.so.cache.

Thanks and Regards
Sridhar M

Sridhar M wrote:
> 
> Hi,
> I am trying to bring up a AMCC 440EP yosemite eval board using wind river
> linux 2.0/I cross compiled busy box 1.4.1 and the kernel . I tried to
> bring up the board using TFTP. 
> 
> It loads the kernel and the file system.I get an error message when init
> is spawned.
> 
> EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
> [    4.851771] 
> VFS: Mounted root (ext2 filesystem).
> 
> [    4.856547] Freeing unused kernel memory: 120k init
> [    
> 4.863038] init has generated signal 11 but has no handler for it
> 
> [    4.869283] Kernel panic - not syncing: Attempted to kill init!
> [    4.875221] Rebooting in 3 seconds.
> 
> 
> Please help me. Am struck with this for almost 3 days.
> 

-- 
View this message in context: http://www.nabble.com/init-exits-with-signal-11-tp25020951p25021185.html
Sent from the Uboot - Users mailing list archive at Nabble.com.