[U-Boot] [PATCH] samsung: fix DMC1_MEM_CFG for s3c64xx

[Minkyu Kang]

Dear Seunghyeon Rhee,

2009/11/28 "Seunghyeon Rhee (이승현)" <seunghyeon at lpmtec.com>:
> The MSB of DMC1_MEM_CFG can be set to '1' for separate CKE control
> for S3C6400. In the configuration of SMDK6400, however, two 16-bit
> mDDR (SAMSUNG K4X51163) chips are used in parallel to form 32-bit
> memory bus and there is no need to contorl CKE for each chip
> separately. AFAIK, CKE1 is not at all connected. Only CKE0 is
> used. Futhermore, it should be '0' always for S3C6410. When tested
> with a board which has a S3C6410 and the same memory configuration,
> a side effect is obsearved that u-boot command "reset" doesn't work
> leading to system hang. Leaving the bit clear is safe in most cases.
>
> Signed-off-by: Seunghyeon Rhee <seunghyeon at lpmtec.com>
> ---
>  include/s3c6400.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/include/s3c6400.h b/include/s3c6400.h
> index e527c08..7229ea6 100644
> --- a/include/s3c6400.h
> +++ b/include/s3c6400.h
> @@ -817,7 +817,7 @@
>  /*-----------------------------------------------------------------------
>  * Physical Memory Map
>  */
> -#define DMC1_MEM_CFG   0x80010012      /* Chip1, Burst4, Row/Column bit */
> +#define DMC1_MEM_CFG   0x00010012      /* Chip1, Burst4, Row/Column bit */
>  #define DMC1_MEM_CFG2  0xB45
>  #define DMC1_CHIP0_CFG 0x150F8         /* 0x4000_0000 ~ 0x43ff_ffff (64MB) */
>  #define DMC_DDR_32_CFG 0x0             /* 32bit, DDR */
> --
> 1.6.2.5
>
>
> --
> Seunghyeon Rhee, Ph.D. / Director
> LPM Technology Inc.
> T +82-70-8255-6007  F +82-2-6442-6462
> M +82-10-2790-0657
>

Please rebase this patch.
s3c6400.h is moved to include/asm-arm/arch-s3c64xx/s3c6400.h

Thanks
Minkyu Kang
-- 
from. prom.
www.promsoft.net