[U-Boot] [PATCH V2] ppc4xx: Canyonlands: Fix USB host PHY reset sequence

[Wolfgang Denk]

Dear Dave Mitchell,

In message <1260824693-11874-1-git-send-email-dmitchell at appliedmicro.com> you wrote:
> Current de-assert reset is not sufficient for the USB PHY reset
> on some Canyonlands platforms. The patch adds an assert/de-assert
> sequence. This addresses a USB detection problem for devices
> attached prior to power-up. The delay lengths are needed for
> power to the PHY to stabilize.
> 
> Signed-off-by: Jeff Mann <MannJ at embeddedplanet.com>
> Signed-off-by: Dave Mitchell <dmitchell at appliedmicro.com>
> Acked-by: Tirumala Reddy Marri <tmarri at appliedmicro.com>
> ---
> v1->v2: fixed typo

NAK again. This does not belong in generic board init code. 

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Documentation is the castor oil of programming.
Managers know it must be good because the programmers hate it so much.