[U-Boot] [PATCH 8/8 v2] 83xx: Add eSDHC support on 8379 EMDS board

[Andy Fleming]

Signed-off-by: Andy Fleming <afleming at freescale.com>
---
Addressed Kim's comments

 board/freescale/mpc837xemds/mpc837xemds.c |   23 ++++++++++++++++++-----
 cpu/mpc83xx/cpu.c                         |   14 ++++++++++++++
 include/asm-ppc/immap_83xx.h              |    2 ++
 include/configs/MPC837XEMDS.h             |   15 +++++++++++++++
 include/mpc83xx.h                         |    3 +++
 5 files changed, 52 insertions(+), 5 deletions(-)

diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 156d808..062d762 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -23,6 +23,7 @@
 
 int board_early_init_f(void)
 {
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
 	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
@@ -30,6 +31,18 @@ int board_early_init_f(void)
 	/* Clear all of the interrupt of BCSR */
 	bcsr[0xe] = 0xff;
 
+#ifdef CONFIG_MMC
+	/* Set SPI_SD, SER_SD, and IRQ4_WP so that SD signals go through */
+	bcsr[0xc] |= 0x4c;
+
+	/* Set proper bits in SICR to allow SD signals through */
+	clrsetbits_be32(&im->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
+
+	clrsetbits_be32(&im->sysconf.sicrh, (SICRH_GPIO2_E | SICRH_SPI),
+			(SICRH_GPIO2_E_SD | SICRH_SPI_SD));
+
+#endif
+
 #ifdef CONFIG_FSL_SERDES
 	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr = in_be32(&immr->sysconf.spridr);
@@ -38,21 +51,21 @@ int board_early_init_f(void)
 	switch (PARTID_NO_E(spridr)) {
 	case SPR_8377:
 		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
-				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+				FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8378:
 		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SGMII,
-				 FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V);
+				FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8379:
 		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
-				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+				FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
-				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+				FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	default:
 		printf("serdes not configured: unknown CPU part number: "
-		       "%04x\n", spridr >> 16);
+				"%04x\n", spridr >> 16);
 		break;
 	}
 #endif /* CONFIG_FSL_SERDES */
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 587fca3..9e0a05d 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -34,6 +34,7 @@
 #include <libfdt.h>
 #include <tsec.h>
 #include <netdev.h>
+#include <fsl_esdhc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -385,3 +386,16 @@ int cpu_eth_init(bd_t *bis)
 #endif
 	return 0;
 }
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+	return fsl_esdhc_mmc_init(bis);
+#else
+	return 0;
+#endif
+}
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 77c09db..7b847f8 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -895,4 +895,6 @@ typedef struct immap {
 } immap_t;
 #endif
 
+#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET	(0x2e000)
+#define CONFIG_SYS_MPC83xx_ESDHC_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
 #endif				/* __IMMAP_83xx__ */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 0dd6ef5..75b67b4 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -319,6 +319,9 @@
 #define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
+#define CONFIG_SYS_64BIT_STRTOUL		1
+#define CONFIG_SYS_64BIT_VSPRINTF		1
+
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
@@ -502,6 +505,18 @@ extern int board_pci_host_broken(void);
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 191488a..3554fdd 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -266,6 +266,7 @@
 /* SICRL bits - MPC837x specific */
 #define SICRL_USB_A			0xC0000000
 #define SICRL_USB_B			0x30000000
+#define SICRL_USB_B_SD			0x20000000
 #define SICRL_UART			0x0C000000
 #define SICRL_GPIO_A			0x02000000
 #define SICRL_GPIO_B			0x01000000
@@ -307,10 +308,12 @@
 #define SICRH_GPIO2_C			0x00002000
 #define SICRH_GPIO2_D			0x00001000
 #define SICRH_GPIO2_E			0x00000C00
+#define SICRH_GPIO2_E_SD		0x00000800
 #define SICRH_GPIO2_F			0x00000300
 #define SICRH_GPIO2_G			0x000000C0
 #define SICRH_GPIO2_H			0x00000030
 #define SICRH_SPI			0x00000003
+#define SICRH_SPI_SD			0x00000001
 #endif
 
 /* SWCRR - System Watchdog Control Register
-- 
1.5.4.GIT