[U-Boot] [PATCH 1/3] Added nomadik.h header

[Alessandro Rubini]

From: Alessandro Rubini <rubini at unipv.it>

Signed-off-by: Alessandro Rubini <rubini at unipv.it>
Acked-by: Andrea Gallo <andrea.gallo at stnwireless.com>
---
 include/configs/nmdk8815.h |   24 ++----------------------
 include/nomadik.h          |   39 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+), 22 deletions(-)
 create mode 100644 include/nomadik.h

diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h
index 01de08f..a370f6c 100644
--- a/include/configs/nmdk8815.h
+++ b/include/configs/nmdk8815.h
@@ -25,6 +25,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <nomadik.h>
+
 #define CONFIG_ARM926EJS
 #define CONFIG_NOMADIK
 #define CONFIG_NOMADIK_8815
@@ -163,26 +165,4 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	512
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 
-/* base addresses of our peripherals */
-#define NOMADIK_SRC_BASE	0x101E0000	/* System and Reset Cnt */
-#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
-#define NOMADIK_MPMC_BASE	0x10110000	/* SDRAM Controller */
-#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC Controller */
-#define NOMADIK_1NAND_BASE	0x30000000
-#define NOMADIK_GPIO0_BASE	0x101E4000
-#define NOMADIK_GPIO1_BASE	0x101E5000
-#define NOMADIK_GPIO2_BASE	0x101E6000
-#define NOMADIK_GPIO3_BASE	0x101E7000
-#define NOMADIK_CPLD_BASE	0x36000000
-#define NOMADIK_UART0_BASE	0x101FD000
-#define NOMADIK_UART1_BASE	0x101FB000
-#define NOMADIK_UART2_BASE	0x101F2000
-
-#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
-#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
-
-#define NOMADIK_RTC_BASE	0x101E8000
-#define NOMADIK_ETH0_BASE	0x36800300
-#define NOMADIK_CPLD_UART_BASE	0x36480000
-
 #endif /* __CONFIG_H */
diff --git a/include/nomadik.h b/include/nomadik.h
new file mode 100644
index 0000000..d9405fd
--- /dev/null
+++ b/include/nomadik.h
@@ -0,0 +1,39 @@
+/* Collection of constants used to access Nomadik registers */
+
+#ifndef __NOMADIK_H__
+#define __NOMADIK_H__
+
+/* Base addresses of our peripherals */
+#define NOMADIK_SRC_BASE	0x101E0000	/* System and Reset Cnt */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_MPMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC Controller */
+#define NOMADIK_1NAND_BASE	0x30000000
+#define NOMADIK_GPIO0_BASE	0x101E4000
+#define NOMADIK_GPIO1_BASE	0x101E5000
+#define NOMADIK_GPIO2_BASE	0x101E6000
+#define NOMADIK_GPIO3_BASE	0x101E7000
+#define NOMADIK_CPLD_BASE	0x36000000
+#define NOMADIK_UART0_BASE	0x101FD000
+#define NOMADIK_UART1_BASE	0x101FB000
+#define NOMADIK_UART2_BASE	0x101F2000
+
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+
+#define NOMADIK_RTC_BASE	0x101E8000
+#define NOMADIK_ETH0_BASE	0x36800300
+#define NOMADIK_CPLD_UART_BASE	0x36480000
+
+/* Chip select registers ("Flexible Static Memory Controller") */
+
+#define REG_FSMC_BCR0	(NOMADIK_FSMC_BASE + 0x00)
+#define REG_FSMC_BTR0	(NOMADIK_FSMC_BASE + 0x04)
+#define REG_FSMC_BCR1	(NOMADIK_FSMC_BASE + 0x08)
+#define REG_FSMC_BTR1	(NOMADIK_FSMC_BASE + 0x0c)
+#define REG_FSMC_PCR0	(NOMADIK_FSMC_BASE + 0x40)
+#define REG_FSMC_PMEM0	(NOMADIK_FSMC_BASE + 0x48)
+#define REG_FSMC_PATT0	(NOMADIK_FSMC_BASE + 0x4c)
+#define REG_FSMC_ECCR0	(NOMADIK_FSMC_BASE + 0x54)
+
+#endif /* __NOMADIK_H__ */
-- 
1.6.0.2