[U-Boot] tftp not working

[Afzal Nadirshah]

Hi,
I connected to the other ethernet port on the board. I got the following :
=> tftp 100000 u-boot-nand.bin
Waiting for PHY auto negotiation to complete.. done
ENET Speed is 100 Mbps - FULL duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 172.22.68.33; our IP address is 172.22.68.36
Filename 'u-boot-nand.bin'.
Load address: 0x100000
Loading: *

This also hangs at the same point.

But when i do a boot from NOR, the u-boot in the NOR flash does not give any problems.I am able to do a tftp file download properly.

________________________________________
From: Stefan Roese [sr at denx.de]
Sent: Monday, February 16, 2009 2:45 PM
To: Afzal Nadirshah
Cc: u-boot at lists.denx.de; Wolfgang Denk
Subject: Re: [U-Boot] tftp not working

On Monday 16 February 2009, Afzal Nadirshah wrote:
> I did as suggested by you. I also set the serverip as well as ipaddr. Now
> when i do a tftp 100000 u-boot-nand.bin, i get the following :
>
> => tftp 100000 u-boot-nand.bin
> Waiting for PHY auto negotiation to complete...... TIMEOUT !

!!!

>  done
> ENET Speed is 10 Mbps - HALF duplex connection (EMAC0)
> Using ppc_4xx_eth0 device
> TFTP from server 172.22.68.33; our IP address is 172.22.68.36
> Filename 'u-boot-nand.bin'.
> Load address: 0x100000
> Loading: *
>
> It hangs at this point

Your board doesn't have a correct ethernet link. Is this really the original
Canyonlands board? Is the correct ethernet port connected?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

http://www.mindtree.com/email/disclaimer.html