[U-Boot] saveenv command erases flash u-boot

[Wolfgang Denk]

Dear rudresh,

In message <22156928.post at talk.nabble.com> you wrote:
> 
> i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR
> Flash , u-boot stored in NOR flash. when i do the saveenv , reset command
> the u-boot is erased. i'm not able to fix  this issue.  help me to fix this
> issue

1.3.0 is extremely old. Please use current code instead
(v2009.03-rc1).  Chances are good that the problem has long been
fixed.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What is wanted is not the will to believe,  but the will to find out,
which is the exact opposite.
		        -- Bertrand Russell, "Skeptical Essays", 1928