[U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci

[Remy Bohmer]

Hello Michael,

2008/12/31 Michael Trimarchi <trimarchi at gandalf.sssup.it>:
> Add USB ehci pci support. This patch doesn't include any
> pci_ids and it is not tested on real hardware.
>
> Signed-off-by: Michael Trimarchi <trimarchimichael at yahoo.it>

I applied this series to the u-boot-usb 'testing' branch.
When it compiles properly, I move it to the 'next' branch for the next
U-boot release.

Thanks.

Remy


>
> ---
>  drivers/usb/Makefile       |    1 +
>  drivers/usb/usb_ehci_pci.c |   64 ++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 65 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/usb/usb_ehci_pci.c
>
> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> index 6ba154b..26189b6 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -35,6 +35,7 @@ COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
>  COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
>  COBJS-$(CONFIG_USB_SL811HS) += sl811_usb.o
>  COBJS-$(CONFIG_USB_EHCI_FSL) += usb_ehci_fsl.o
> +COBJS-$(CONFIG_USB_EHCI_PCI) += usb_ehci_pci.o
>
>  # device
>  ifdef CONFIG_USB_DEVICE
> diff --git a/drivers/usb/usb_ehci_pci.c b/drivers/usb/usb_ehci_pci.c
> new file mode 100644
> index 0000000..3e7143c
> --- /dev/null
> +++ b/drivers/usb/usb_ehci_pci.c
> @@ -0,0 +1,64 @@
> +/*-
> + * Copyright (c) 2007-2008, Juniper Networks, Inc.
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2 of
> + * the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <pci.h>
> +#include <usb.h>
> +#include "usb_ehci.h"
> +#include "usb_ehci_core.h"
> +
> +#ifdef CONFIG_PCI_EHCI_DEVICE
> +static struct pci_device_id ehci_pci_ids[] = {
> +       /* Please add supported PCI EHCI controller ids here */
> +       {0, 0}
> +};
> +#endif
> +
> +/*
> + * Create the appropriate control structures to manage
> + * a new EHCI host controller.
> + */
> +int ehci_hcd_init(void)
> +{
> +       pci_dev_t pdev;
> +       uint32_t addr;
> +
> +       pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
> +       if (pdev == -1) {
> +               printf("EHCI host controller not found\n");
> +               return -1;
> +       }
> +
> +       pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &addr);
> +       hccr = (struct ehci_hccr *)addr;
> +       hcor = (struct ehci_hcor *)((uint32_t) hccr +
> +                       HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +       return 0;
> +}
> +
> +/*
> + * Destroy the appropriate control structures corresponding
> + * the the EHCI host controller.
> + */
> +int ehci_hcd_stop(void)
> +{
> +       return 0;
> +}
> --
> 1.5.6.5
>
>