[U-Boot] [USB PATCH] USB change speed

[Remy Bohmer]

Hello Michael,

2008/12/18 Michael Trimarchi <trimarchi at gandalf.sssup.it>:
> USB changes the speed according to the port status
>
> Signed-off-by: Michael Trimarchi <trimarchimichael at yahoo.it>

I applied this series to the u-boot-usb 'testing' branch.
When it compiles properly and no regressions are being detected, I
move it to the 'next' branch for the next U-boot release.

Thanks.

Remy


>
> ---
> diff --git a/common/usb.c b/common/usb.c
> index 3138452..0c11746 100644
> --- a/common/usb.c
> +++ b/common/usb.c
> @@ -1061,10 +1061,12 @@ static int hub_port_reset(struct usb_device *dev, int port,
>                }
>                portstatus = le16_to_cpu(portsts.wPortStatus);
>                portchange = le16_to_cpu(portsts.wPortChange);
> +
>                USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
>                                portstatus, portchange,
> -                               portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? \
> +                               portstatus & (1 << USB_PORT_FEAT_LOWSPEED) ? \
>                                                "Low Speed" : "High Speed");
> +
>                USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
>                               "  USB_PORT_STAT_ENABLE %d\n",
>                        (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
> @@ -1136,7 +1138,13 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
>
>        /* Allocate a new device struct for it */
>        usb = usb_alloc_new_device();
> -       usb->speed = (portstatus & USB_PORT_STAT_LOW_SPEED) ? 1 : 0;
> +
> +       if (portstatus & USB_PORT_STAT_HIGH_SPEED)
> +               usb->speed = USB_SPEED_HIGH;
> +       else if (portstatus & USB_PORT_STAT_LOW_SPEED)
> +               usb->speed = USB_SPEED_LOW;
> +       else
> +               usb->speed = USB_SPEED_FULL;
>
>        dev->children[port] = usb;
>        usb->parent = dev;
>