[U-Boot] [PATCH 3/3] mpc83xx: Add PCI-E support for MPC837XEMDS boards

[Kim Phillips]

On Thu, 8 Jan 2009 04:26:19 +0300
Anton Vorontsov <avorontsov at ru.mvista.com> wrote:

> MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
> provides two PCI-E (x2) ports. Though, only one port can be used in x2
> mode. Two ports can function simultaneously in x1 mode.
> 
> PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
> 
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---

applied to u-boot-mpc83xx next.

can you please work together to resolve any issues Dave brought up with
this one, and send supplemental patches to u-boot-mpc83xx next?  I
don't particularly care about BSP compatibility (esp. since you
indicated it wasn't worth the effort), but the serdes initialization
vs. pecr1 deassertion might need further attention.

Thanks all,

Kim