[U-Boot] [PATCH 2/4 v3] powerpc: 83xx: add support for the kmeter1 board

[Wolfgang Denk]

Dear Heiko Schocher,

In message <4925268B.2020907 at denx.de> you wrote:
> This patch adds support for the kmeter1 board from Keymile,
> based on a Freescale MPC8360 CPU.
> 
> - serial console on UART 1
> - 256 MB DDR2 RAM
> - 64 MB NOR Flash
> - Ethernet RMII Mode over UCC4
> - PHY SMSC LAN8700
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
> 
> changes since v2:
> 
>   added comments from Kim Philips
>   added doc/README.kmeter1
> 
>  MAINTAINERS                     |    1 +
>  MAKEALL                         |    1 +
>  Makefile                        |    3 +
>  board/keymile/kmeter1/Makefile  |   51 ++++
>  board/keymile/kmeter1/config.mk |   24 ++
>  board/keymile/kmeter1/kmeter1.c |  153 ++++++++++++
>  doc/README.kmeter1              |   91 +++++++
>  include/configs/kmeter1.h       |  523 +++++++++++++++++++++++++++++++++++++++
>  8 files changed, 847 insertions(+), 0 deletions(-)
>  create mode 100644 board/keymile/kmeter1/Makefile
>  create mode 100644 board/keymile/kmeter1/config.mk
>  create mode 100644 board/keymile/kmeter1/kmeter1.c
>  create mode 100644 doc/README.kmeter1
>  create mode 100644 include/configs/kmeter1.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
News is what a chap who doesn't care much  about  anything  wants  to
read. And it's only news until he's read it. After that it's dead.
                           - Evelyn Waugh _Scoop_ (1938) bk. 1, ch. 5