[U-Boot] [PATCH v2] Add 16bpp BMP support

Mark Jackson mpfj at mimc.co.uk
Tue Jan 27 12:32:20 CET 2009


This patch adds 16bpp BMP support to the common lcd code.

At the moment it's only been tested on the MIMC200 AVR32 board, but the hooks 
are in place to extend this to other platforms.

Signed-off-by: Mark Jackson <mpfj at mimc.co.uk>
---

  common/lcd.c |   55 +++++++++++++++++++++++++++++++++++++++++++++----------
  1 files changed, 45 insertions(+), 10 deletions(-)

diff --git a/common/lcd.c b/common/lcd.c
index ae79051..8cbb540 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -84,7 +84,7 @@ extern void lcd_enable (void);
  static void *lcd_logo (void);


-#if LCD_BPP == LCD_COLOR8
+#if (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
  extern void lcd_setcolreg (ushort regno,
  				ushort red, ushort green, ushort blue);
  #endif
@@ -656,7 +656,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)

  	bpix = NBITS(panel_info.vl_bpix);

-	if ((bpix != 1) && (bpix != 8)) {
+	if ((bpix != 1) && (bpix != 8) && (bpix != 16)) {
  		printf ("Error: %d bit/pixel mode not supported by U-Boot\n",
  			bpix);
  		return 1;
@@ -738,17 +738,52 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
  	bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset);
  	fb   = (uchar *) (lcd_base +
  		(y + height - 1) * lcd_line_length + x);
-	for (i = 0; i < height; ++i) {
-		WATCHDOG_RESET();
-		for (j = 0; j < width ; j++)
+
+	switch (bpix) {
+	case 1: /* pass through */
+	case 8:
+		for (i = 0; i < height; ++i) {
+			WATCHDOG_RESET();
+			for (j = 0; j < width ; j++)
  #if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD)
-			*(fb++) = *(bmap++);
+				*(fb++) = *(bmap++);
  #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
-			*(fb++)=255-*(bmap++);
+				*(fb++)=255-*(bmap++);
  #endif
-		bmap += (width - padded_line);
-		fb   -= (width + lcd_line_length);
-	}
+			bmap += (width - padded_line);
+			fb   -= (width + lcd_line_length);
+		}
+		break;
+	
+#if defined(CONFIG_PXA250)
+#error 16 bpp support not added for PXA250
+#elif defined(CONFIG_ATMEL_LCD)
+	case 16:
+		for (i = 0; i < height; ++i) {
+			WATCHDOG_RESET();
+			for (j = 0; j < width; j++) {
+#if defined(CONFIG_ATMEL_LCD_BGR555)
+				*(fb++) = ((bmap[0] & 0x1f) << 2) | (bmap[1] & 0x03);
+				*(fb++) = (bmap[0] & 0xe0) | ((bmap[1] & 0x7c) >> 2);
+				bmap += 2;
+#else
+				*(fb++) = *(bmap++);
+				*(fb++) = *(bmap++);
+#endif
+			}
+			bmap += (padded_line - width) * 2;
+			fb   -= (width * 2 + lcd_line_length);
+		}
+		break;
+#elif defined(CONFIG_MPC823)
+#error 16 bpp support not added for MPC823
+#elif defined(CONFIG_MCC200)
+#error 16 bpp support not added for MCC200
+#endif
+
+	default:
+		break;
+	};

  	return (0);
  }


More information about the U-Boot mailing list