[U-Boot] Reset command on u-boot command line not working

[Ajeesh Kumar]

Hello,

I too got this info, but due to stipulated time, I cant shift to newer
version now. 
I assumed that as development used the same u-boot thought of going with the
same.
Please help me. 

Thanks,
Ajeesh Kumar

-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de] 
Sent: Tuesday, January 27, 2009 7:21 PM
To: ajeesh at tataelxsi.co.in
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] Reset command on u-boot command line not working

Dear "Ajeesh Kumar",

In message <VSNLCHNFE0010mG7VAS00055aac at VSNLCHNFE001.VSNLXCHANGE.COM> you
wrote:
> 
> I'm using the u-boot what I got  with the development board (EP8548A) 
> and we have a custom board Which is pretty similar to that. And I 
> don't want to take any risk in changing the u-boot because is have 
> Stipulated time. I'm done with the custom board bring up as of now, I 
> have issues only in the reset.

You must not expect much help with obsolete code. U-Boot 1.2.0 is close to 2
years old. A zillion problems has been fixed since in general, and
especially for the 8548.

Frankly, it makes zero sense to use 1.2.0 on a new custom board.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Everyting looks interesting until you do it. Then you find it's  just
another job.                     - Terry Pratchett, _Moving Pictures_


The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.