[U-Boot] [PATCH 3/3] arm: Added support for jadecpu board based on Jade SoC

Matthias Weisser matthias.weisser at graf-syteco.de
Wed Jul 8 09:47:07 CEST 2009


This patch adds support for the jadecpu board using the
MB86R01 'Jade' SoC from Fujitsu.

Signed-off-by: Matthias Weisser <matthias.weisser at graf-syteco.de>
---
 MAINTAINERS                          |    4 +
 MAKEALL                              |    1 +
 Makefile                             |    7 +
 board/syteco/jadecpu/Makefile        |   55 ++++++
 board/syteco/jadecpu/config.mk       |    1 +
 board/syteco/jadecpu/jadecpu.c       |   99 ++++++++++
 board/syteco/jadecpu/lowlevel_init.S |  337 ++++++++++++++++++++++++++++++++++
 include/configs/jadecpu.h            |  160 ++++++++++++++++
 tools/Makefile                       |    3 +
 tools/logos/syteco.bmp               |  Bin 0 -> 12278 bytes
 10 files changed, 667 insertions(+), 0 deletions(-)
 create mode 100644 board/syteco/jadecpu/Makefile
 create mode 100644 board/syteco/jadecpu/config.mk
 create mode 100644 board/syteco/jadecpu/jadecpu.c
 create mode 100644 board/syteco/jadecpu/lowlevel_init.S
 create mode 100644 include/configs/jadecpu.h
 create mode 100644 tools/logos/syteco.bmp

diff --git a/MAINTAINERS b/MAINTAINERS
old mode 100644
new mode 100755
index 9379c7e..157f437
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -671,6 +671,10 @@ Sergey Lapin <slapin at ossfans.org>
 
 	afeb9260	ARM926EJS (AT91SAM9260 SoC)
 
+Matthias Weisser <matthias.weisser at graf-syteco.de>
+
+	jadecpu	ARM926EJS (Jade SoC)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index f4599d6..841c3d6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -533,6 +533,7 @@ LIST_ARM9="			\
 	davinci_sffsdr		\
 	davinci_sonata		\
 	davinci_dm355evm	\
+	jadecpu				\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
old mode 100644
new mode 100755
index bcc81c9..0088d6d
--- a/Makefile
+++ b/Makefile
@@ -2785,6 +2785,13 @@ at91sam9rlek_config	:	unconfig
 pm9263_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
+#########################################################################
+## Different ARM926EJ-S Systems
+#########################################################################
+
+jadecpu_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs jadecpu syteco jade
+
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
 integratorap_config	\
diff --git a/board/syteco/jadecpu/Makefile b/board/syteco/jadecpu/Makefile
new file mode 100755
index 0000000..87d2234
--- /dev/null
+++ b/board/syteco/jadecpu/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop at leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= jadecpu.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/syteco/jadecpu/config.mk b/board/syteco/jadecpu/config.mk
new file mode 100755
index 0000000..c661f0b
--- /dev/null
+++ b/board/syteco/jadecpu/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x46000000
diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
new file mode 100755
index 0000000..51dc8f7
--- /dev/null
+++ b/board/syteco/jadecpu/jadecpu.c
@@ -0,0 +1,99 @@
+/*
+ * (c) 2009 Graf-Syteco, Matthias Weisser
+ * <matthias.weisser at graf-syteco.de>
+ *
+ * (C) Copyright 2007, mycable GmbH
+ * Carsten Schneider <cs at mycable.de>, Alexander Bigga <ab at mycable.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/jade.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void multiplex_group_init(void);
+void gpio_init(void);
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+	printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+		"subs %0, %1, #1\n"
+		"bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	/* arch number of Versatile Board */
+	gd->bd->bi_arch_number = 0	/*MACH_TYPE_GSJADECPU*/;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x47000000;
+
+	gd->flags = 0;
+
+	icache_enable();
+
+	/* set Multiplex Group */
+	multiplex_group_init();
+
+	/* init GPIOs */
+	gpio_init();
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	setenv("verify", "n");
+	return (0);
+}
+
+/*
+ * DRAM configuration
+ */
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+/*
+ * Initial the Pin Multiplex Groups
+ */
+void multiplex_group_init(void)
+{
+
+}
+
+void gpio_init(void)
+{
+
+}
+
diff --git a/board/syteco/jadecpu/lowlevel_init.S b/board/syteco/jadecpu/lowlevel_init.S
new file mode 100755
index 0000000..727eda5
--- /dev/null
+++ b/board/syteco/jadecpu/lowlevel_init.S
@@ -0,0 +1,337 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2007, mycable GmbH
+ * Carsten Schneider <cs at mycable.de>, Alexander Bigga <ab at mycable.de>
+ *
+ * (C) Copyright 2007, mycable GmbH
+ * Carsten Schneider <cs at mycable.de>, Alexander Bigga <ab at mycable.de>
+ *
+ * (C) Copyright 2003, ARM Ltd.
+ * Philippe Robin, <philippe.robin at arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software/* you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation/* either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY/* without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program/* if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+/*------------------------------------------------------------------------------*/
+/*  Initialize Clock Reset Generator (CRG)                                      */
+/*------------------------------------------------------------------------------*/
+
+		ldr		r0, =0xfffe7000			/* CRG base address */
+
+		/* Not change the initial value that is set by external pin.*/
+1:		ldr		r2, [r0, #0x00]			/* Wait for PLLREADY */
+		tst		r2, #0x00000100
+		beq		1b
+
+		/* Set clock gate control */
+		ldr		r1, =0x0000ffff			/* Open */
+		str		r1, [r0, #0x18]			/* CRHA: AHB clock */
+		ldr		r1, =0x0000ffff			/* Open */
+		str		r1, [r0, #0x1c]			/* CRPA: APB-A clock */
+		ldr		r1, =0xfffffffe			/* Close */
+		str		r1, [r0, #0x20]			/* CRPA: APB-B clock */
+		ldr		r1, =0x0000ffff			/* Open */
+		str		r1, [r0, #0x24]			/* CRHB: ExtAHB clock */
+		ldr		r1, =0xffffffef			/* Open ARM926EJ-S only */
+		str		r1, [r0, #0x28]			/* CRAM: ARM core clock */
+
+/*------------------------------------------------------------------------------*/
+/*  Initialize External Bus Interface                                           */
+/*------------------------------------------------------------------------------*/
+#define MEMC_BASE	0xfffc0000
+
+		ldr		r0, =MEMC_BASE		/* MEMC base address */
+
+		/* SRAM/flash _mode_ registers (XCS4 is set by external pin)
+			XCS0: Ethernet Controller
+			XCS2: not used (?)
+			XCS4: Flash
+		*/
+		ldr		r1, =0x00000001		/* XCS0: 16bit */
+		str		r1, [r0, #0x00]
+		ldr		r1, =0x00000001		/* XCS2: 16bit */
+		str		r1, [r0, #0x08]
+		ldr		r1, =0x00000021		/* XCS4: 16bit, */
+		str		r1, [r0, #0x10]
+
+		/* SRAM/flash _timing_ registers (HCLK=83.3/80MHz) */
+		ldr		r1, =0x055ff00f		/* XCS0: */
+		str		r1, [r0, #0x20]
+		ldr		r1, =0x03061008		/* XCS2: not used */
+		str		r1, [r0, #0x28]
+		ldr		r1, =0x03061804		/* XCS4: FLASH ROM, reviewed by ab at mycable.de */
+		str		r1, [r0, #0x30]
+
+		/* SRAM/flash _area_ registers (address of XCS4 is set by external pin) */
+		ldr		r1, =0x00000020
+		str		r1, [r0, #0x40]
+		ldr		r1, =0x00000050		/* XCS2: 0x05000000/2MB */
+		str		r1, [r0, #0x48]
+		ldr		r1, =0x001f0000		/* XCS4: 32 MB */
+		str		r1, [r0, #0x50]
+
+/*------------------------------------------------------------------------------*/
+/*  GPIO Settings                                                               */
+/*------------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------- */
+/*  Initialize DDR2 Controller                                                  */
+/*----------------------------------------------------------------------------- */
+#define CCNT_BASE		0xfff42000
+#define CDEBUG1			0xec
+
+#define DDR2C_BASE		0xf3000000
+#define DRIC			0x00
+#define DRIC1			0x02
+#define DRIC2			0x04
+#define DRCA			0x06
+#define DRCM			0x08
+#define DRCST1			0x0a
+#define DRCST2			0x0c
+#define DRCR			0x0e
+#define DRCF			0x20
+#define DRASR			0x30
+#define DRIMS			0x50
+#define DROS			0x60
+#define DRIBSLI			0x62
+#define DRIBSODT1		0x64
+#define DRIBSOCD		0x66
+#define DRIBSOCD2		0x68
+#define DROABA			0x70
+#define DROBV			0x80
+#define DROBS			0x84
+#define DROBSR1			0x86
+#define DROBSR2			0x88
+#define DROBSR3			0x8a
+#define DROBSR4			0x8c
+#define DRIMR1			0x90
+#define DRIMR2			0x92
+#define DRIMR3			0x94
+#define DRIMR4			0x96
+#define DROISR1			0x98
+#define DROISR2			0x9a
+
+		.macro wait, count
+		mov		r4, #\count
+3:
+		subs	r4, r4, #0x1
+		bne		3b
+
+		.endm
+
+		/* Wait for PLL LOCK up time or more */
+		wait	20
+
+	/* ----------------------- */
+	/* (2) Initialize DDRIF */
+	/* ----------------------- */
+		ldr		r0, =DDR2C_BASE			/* DDR2C base address */
+		ldr		r1, =0x5555
+		strh	r1, [r0, #DRIMS]
+
+	/* ----------------------- */
+	/* (3) Wait for 20MCKPs(120nsec) or more */
+	/* ----------------------- */
+		wait	20
+
+	/* ----------------------- */
+	/* (4) IRESET/IUSRRST release */
+	/* ----------------------- */
+		ldr		r0, =CCNT_BASE			/* CCNT base address */
+		ldr		r1, =0x00000002
+		str		r1, [r0, #CDEBUG1]
+
+	/* ----------------------- */
+	/* (5) Wait for 20MCKPs(120nsec) or more */
+	/* ----------------------- */
+		wait	20
+
+	/* ----------------------- */
+	/* (6) IDLLRST release */
+	/* ----------------------- */
+		ldr		r0, =CCNT_BASE			/* CCNT base address */
+		ldr		r1, =0x00000003
+		str		r1, [r0, #CDEBUG1]
+
+	/* ----------------------- */
+	/* (7+8) Wait for 200us(=200000ns) or more (DDR2 Spec) */
+	/* ----------------------- */
+	wait 33536
+
+	/* ----------------------- */
+	/* (9) MCKE ON */
+	/* ----------------------- */
+		ldr		r0, =DDR2C_BASE			/* DDR2C base address */
+		ldr		r1, =0x003f
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0000
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc124				/* 512Mbit DDR2SDRAM x 2 */
+		strh	r1, [r0, #DRCA]
+		ldr		r1, =0xc000
+		strh	r1, [r0, #DRIC]
+
+	/* ----------------------- */
+	/* (10) Initialize SDRAM  */
+	/* ----------------------- */
+		ldr		r0, =DDR2C_BASE			/* DDR2C base address */
+		ldr		r1, =0xc001				/* NOP Command */
+		strh	r1, [r0, #DRIC]
+
+		wait	67						/* 400ns wait */
+
+		ldr		r1, =0x0017				/* PALL Command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0400
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x0006				/* EMR(2) command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0000
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x0007				/* EMR(3) command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0000
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x0005				/* EMR(1) command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0000			/* Extended Mode Register 1 clear*/
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x0004				/* MRS command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0532			/* Mode Register */
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+	wait 200
+
+		ldr		r1, =0x0017				/* PALL command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0400
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x000f				/* REF command 1 */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0000				/* (changed) */
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		wait    18						 /* 105ns wait */
+
+		ldr		r1, =0x0004				/* MRS command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0432
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		wait    200						/* MRS to OCD: 200clock */
+
+		ldr		r1, =0x0005				/* EMR(1) command */
+		strh	r1, [r0, #DRIC1]
+		ldr		r1, =0x0380				/* Extended Mode Register 1 set OCD */
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x0005				/* EMR(1) command */
+		strh	r1, [r0, #DRIC1]
+		/* ldr  r1, =0x0044 */
+		ldr		r1, =0x0002				/* Extended Mode Register 1 set reduced strength */
+		strh	r1, [r0, #DRIC2]
+		ldr		r1, =0xc001
+		strh	r1, [r0, #DRIC]
+
+		ldr		r1, =0x0032				/* Set BT, AL, CL, BL */
+		strh	r1, [r0, #DRCM]
+
+		ldr	r1, =0x3418			/* Set tRCD, tRAS, tRP, tRC */
+		strh	r1, [r0, #DRCST1]
+
+		/* ldr  r1, =0x2e22 */			/* Set tRFC, tRRD, tWR */
+		ldr		r1, =0x6e32
+		strh	r1, [r0, #DRCST2]
+
+		/* ldr		r1, =0x0051 */		/* Set CNTL, REF_CNT*/
+		ldr		r1, =0x0141			/* (changed) */
+		strh	r1, [r0, #DRCR]
+
+		ldr		r1, =0x0002			/* Set Address FIFO (8 steps) */
+		strh	r1, [r0, #DRCF]
+
+		ldr		r1, =0x0001				/* Enable AXI Cache */
+		strh	r1, [r0, #DRASR]
+
+	/* ----------------------- */
+	/* (11) ODT setting		*/
+	/* ----------------------- */
+		ldr		r0, =DDR2C_BASE				 /* DDR2C base address */
+		ldr		r1, =0x0001
+		strh	r1, [r0, #DROBS]
+		ldr		r1, =0x0103			/* ODT auto adjustment on */
+		strh	r1, [r0, #DROABA]
+		ldr		r1, =0x003F			/* Set ODT to on 50/100 Ohm */
+		strh	r1, [r0, #DRIBSODT1]
+
+	/* ----------------------- */
+	/* (12) Shift to ODTCONT ON (SDRAM side) and DDR2C usual operation mode */
+	/* ----------------------- */
+		ldr		r0, =DDR2C_BASE				 /* DDR2C base address */
+		ldr		r1, =0x0001
+		strh	r1, [r0, #DROS]
+		ldr		r1, =0x4000
+		strh	r1, [r0, #DRIC]
+
+		mov pc, lr
+
+/*------------------------------------------------------------------------------*/
+/*  Reset CPU by writing SWRSTREQ to CRSR-register */
+/*------------------------------------------------------------------------------*/
+.globl reset_cpu
+reset_cpu:
+		ldr		r0, =0xfffe7000/* CRG Base address */
+
+		ldr		r2, =0x00000002		/* SWRSTREQ */
+		str		r2, [r0, #0x0c]
+
+_loop_forever:
+		b		_loop_forever
+
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
new file mode 100755
index 0000000..235d0b6
--- /dev/null
+++ b/include/configs/jadecpu.h
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2007-2008
+ * Matthias Weisser <matthias.weisser at graf-syteco.de>
+ *
+ * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_JADE_IOCLK		(41500000)
+#define CONFIG_SYS_TIMERBASE	0xfffe0000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * Serial
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE		(-4)
+#define CONFIG_SYS_NS16550_CLK			CONFIG_JADE_IOCLK
+#define CONFIG_SYS_NS16550_COM1			0xfffe1000
+#define CONFIG_SYS_NS16550_COM2			0xfffe2000
+
+#define CONFIG_CONS_INDEX	1
+
+/*
+ * Ethernet
+ */
+#define CONFIG_DRIVER_SMC911X		1
+#define CONFIG_DRIVER_SMC911X_BASE	0x02000000
+#define CONFIG_DRIVER_SMC911X_16_BIT
+
+/*
+ * Video
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_JADEGDC
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_LOGO
+#define VIDEO_KBD_INIT_FCT		0
+#define VIDEO_TSTC_FCT			serial_tstc
+#define VIDEO_GETC_FCT			serial_getc
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_IMI		1
+#define CONFIG_CMD_ELF		1
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_BMP		1
+//#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM				0x40000000  /* Start address of DDRRAM */
+#define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE		0x10000000	/* Start address of flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1			/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256			/* max number of sectors on one chip */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
+
+#define CONFIG_ENV_ADDR				(CONFIG_SYS_FLASH_BASE + 0x00040000)	/* 256k for uboot */
+#define	CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_SIZE				(128 * 1024)
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_FLASH_CFI_DRIVER		1	/* Use drivers/cfi_flash.c */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+
+#define CONFIG_SYS_LOAD_ADDR			0x40000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM + (512*1024)
+#define CONFIG_SYS_MEMTEST_END			PHYS_SDRAM + PHYS_SDRAM_SIZE
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"jade> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_BOOTDELAY		2
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif	/* __CONFIG_H */
+
diff --git a/tools/Makefile b/tools/Makefile
old mode 100644
new mode 100755
index 43c284c..456e9dd
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -125,6 +125,9 @@ endif
 ifeq ($(VENDOR),ronetix)
 LOGO_BMP= logos/ronetix.bmp
 endif
+ifeq ($(VENDOR),syteco)
+LOGO_BMP= logos/syteco.bmp
+endif
 
 # now $(obj) is defined
 SRCS	+= $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c))
diff --git a/tools/logos/syteco.bmp b/tools/logos/syteco.bmp
new file mode 100755
index 0000000000000000000000000000000000000000..141ee8e10edd85caa52b9501e3a4381b81fe772d
GIT binary patch
literal 12278
zcmeI0TdvbE5Qg2PNJwmiH{MtP??`Ncopb>#s;lC)jN^<mx5VSvEtQTf72hWQzx=+$
zhaW%xehW+behuL(l>Wf)7yK^a^U at yw`TZsRu;KA|g!}yt)yLX&3%A>CEstzCFdP^T
zd`t(f&J=<Se1cz6Vz2%xn8}kC7#8>(XPCrZWxxz)aQVUR*)s#%*H9UWBXrEA1QO&t
zYstvm(XSvSGDIqb%bIEx at j1x-j~>EAlo=D;a@~oAc7b6ib0rJDLd at MXyUuWw7M5lh
zfih3b_~Yq<Q0mM4sm&RQGEdX7KJAq(ZPTPs8d(~qNu#u~oQ5$_npsY+84IPE<=mPv
zQ97`kn5KBBu^pKzRr at FeV}ujV0E-%key8+JPwjR%PSg-fL+v?Zuuzm~N*8k07B$EL
zgOci{u%n!(&w*xPvQV*M3>M{ZnIT6kFp5Q@?7&zo5+*A-3K2%KXp{&O|B7Qh)*L|?
zpC$*w76J<5c_x at E8fJ%u!)!vHl9NR{v&%xA at eq(0pD%ivp1}fG^iANr-ANEg*UW!q
z5!3Wi7BY`!(b&_ei5$V^gNKdw934IaoiAk}Vud1NtB)*p`12iK3IL=Vr3MQz1&YHL
z?g!T5(G$}<te52r at ir{UnfLG|IrA<o(V5;X`SwN+d0eDBdHS-))l0rbu^5}`5<7SE
zRg$sjdj!8hEd8L`mjx~<>uXXIGz-iLz0M#^oeMge`4T14zy+4)zzCKVrZ7jqYdS;U
zK)-geMY1HAGK&er_EJ$=1t^vU#=&C1z*A)XDyd=veR|!7ux30g3PzkUMQIhlSTc-@
zMZgG@*7F4qsH=~K!AO*L798Qkj$n(W{oIW!FU?{FOAaOLb{j}7ih~CEHp_s~Z*R(>
z0tFpD&{ka*OeKq?NOh&;XfR-ESl~bKOcsZ-5uyjHVwp at 9L&w#mVCq;V!xxvX86;tv
zS at 1$`sudaqOe;&gcN7#4x;acE%W?(k1=GfoP<lDj#DXX-Fy!*w!m^>X!E6i4`vtgM
zK%4GqiqZ>a!!mBRTo7yU$TR*rpd^+A%JbZc6eD%0s`up(SQ{|tgv^IC(h;nGKxaB^
J$T5U;;2&8xIXwUX

literal 0
HcmV?d00001

-- 
1.5.6.3



More information about the U-Boot mailing list