[U-Boot] [PATCH 2/3] arm: added support for display controller in Jade SoC

[Anatolij Gustschin]

Dear Matthias,

Matthias Weisser wrote:
> This patch adds support for the display controller in
> the MB86R01 'Jade' SoC.

Looks better now, but still some small issues. Please see
comments below, fix and resubmit. Thanks!

...
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -36,6 +36,7 @@ COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
>  COBJS-$(CONFIG_SED156X) += sed156x.o
>  COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
>  COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o
> +COBJS-$(CONFIG_VIDEO_JADEGDC) += jadegdc.o

please keep list sorted in alphabetical order.

...
> --- a/drivers/video/cfb_console.c
> +++ b/drivers/video/cfb_console.c
...
> +#if defined(VIDEO_FB_16BPP_PIXEL_SWAP) || defined (CONFIG_VIDEO_JADEGDC)
---------------------------------------------------^^^
please remove space here.

...
> diff --git a/drivers/video/jadegdc.c b/drivers/video/jadegdc.c
> new file mode 100755
> index 0000000..55d0a96
> --- /dev/null
> +++ b/drivers/video/jadegdc.c
...
> +GraphicDevice jadegdc;
> +
> +void *video_hw_init(void)
> +{
> +	GraphicDevice *pGD = (GraphicDevice *) & jadegdc;
-----------------------------------------------^^^
you added a space here, please remove it. Also we should drop
the cast, it is not needed.

...
> +		if (NULL == (penv = getenv(varName)))
> +			if((i == 1) || (NULL == (penv = getenv("videomode"))))

please add a space between if and open parenthesis in the above
line. Also please use ((penv = getenv("videomode") == NULL) in both
lines above, i didn't catch it in previous comment, sorry. Thanks!

> +		htp = var_mode[i].left_margin + var_mode[i].xres +
> +				var_mode[i].hsync_len + var_mode[i].right_margin;

please remove one tab in the above line, this line is over 80 chars.

...
> +		vsw = var_mode[i].vsync_len;
> +		vtr = var_mode[i].upper_margin + var_mode[i].yres +
> +				var_mode[i].vsync_len + var_mode[i].lower_margin;

please remove one tab in the above line, this line is over 80 chars,
too.

Thanks,
Anatolij

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de