[U-Boot] [PATCH2/2] Sheevaplug: Add Kirkwood gpio support to Sheevaplug

[Dieter Kiermaier]

Jean,

> On 14:45 Mon 29 Jun     , Dieter Kiermaier wrote:
> > Hi,
> > 
> > patch 2 of 2 which adds Kirkwood GPIO support to Sheevaplug.
> > Any comments are welcome!
> > 
> > Dieter
> > 
> > 
> > >From 528b24be54256cee20f965bc772390034eaeb232 Mon Sep 17 00:00:00 2001
> > From: Dieter Kiermaier <dk-arm-linux at gmx.de>
> > Date: Mon, 29 Jun 2009 14:29:15 +0200
> > Subject: [PATCH] Sheevaplug: Add Kirkwood gpio support to Sheevaplug
> > 
> > 
> > Signed-off-by: Dieter Kiermaier <dk-arm-linux at gmx.de>
> > ---
> >  board/Marvell/sheevaplug/sheevaplug.c |    1 +
> >  include/configs/sheevaplug.h          |    1 +
> >  2 files changed, 2 insertions(+), 0 deletions(-)
> > 
> > diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
> > index 547126a..fa28fea 100644
> > --- a/board/Marvell/sheevaplug/sheevaplug.c
> > +++ b/board/Marvell/sheevaplug/sheevaplug.c
> > @@ -26,6 +26,7 @@
> >  #include <miiphy.h>
> >  #include <asm/arch/kirkwood.h>
> >  #include <asm/arch/mpp.h>
> > +#include <asm/arch/gpio.h>
> >  #include "sheevaplug.h"
> >  
> >  DECLARE_GLOBAL_DATA_PTR;
> > diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
> > index e62353c..7455c29 100644
> > --- a/include/configs/sheevaplug.h
> > +++ b/include/configs/sheevaplug.h
> > @@ -43,6 +43,7 @@
> >  #define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
> >  #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
> >  #define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
> > +#define CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
> >  #define CONFIG_KIRKWOOD_USBPHY_INIT	/* Enable USB PHY init for kernel */
> >  #define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
> why do you need it??
I fear it is of no need - it seems it is left from some earlier testing :(
Should i repost the patch?

Thanks,
Dieter

> 
> Best Regards,
> J.
>