[U-Boot] [PATCH2/2] Sheevaplug: Add Kirkwood gpio support to Sheevaplug

[Jean-Christophe PLAGNIOL-VILLARD]

On 14:45 Mon 29 Jun     , Dieter Kiermaier wrote:
> Hi,
> 
> patch 2 of 2 which adds Kirkwood GPIO support to Sheevaplug.
> Any comments are welcome!
> 
> Dieter
> 
> 
> >From 528b24be54256cee20f965bc772390034eaeb232 Mon Sep 17 00:00:00 2001
> From: Dieter Kiermaier <dk-arm-linux at gmx.de>
> Date: Mon, 29 Jun 2009 14:29:15 +0200
> Subject: [PATCH] Sheevaplug: Add Kirkwood gpio support to Sheevaplug
> 
> 
> Signed-off-by: Dieter Kiermaier <dk-arm-linux at gmx.de>
> ---
>  board/Marvell/sheevaplug/sheevaplug.c |    1 +
>  include/configs/sheevaplug.h          |    1 +
>  2 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
> index 547126a..fa28fea 100644
> --- a/board/Marvell/sheevaplug/sheevaplug.c
> +++ b/board/Marvell/sheevaplug/sheevaplug.c
> @@ -26,6 +26,7 @@
>  #include <miiphy.h>
>  #include <asm/arch/kirkwood.h>
>  #include <asm/arch/mpp.h>
> +#include <asm/arch/gpio.h>
>  #include "sheevaplug.h"
>  
>  DECLARE_GLOBAL_DATA_PTR;
> diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
> index e62353c..7455c29 100644
> --- a/include/configs/sheevaplug.h
> +++ b/include/configs/sheevaplug.h
> @@ -43,6 +43,7 @@
>  #define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
>  #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
>  #define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
> +#define CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
>  #define CONFIG_KIRKWOOD_USBPHY_INIT	/* Enable USB PHY init for kernel */
>  #define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
why do you need it??

Best Regards,
J.