[U-Boot] [PATCH1/2] Kirkwood: add Marvell Kirkwood gpio driver

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Heiko Schocher
> Sent: Thursday, July 09, 2009 11:11 AM
> To: Jean-Christophe PLAGNIOL-VILLARD
> Cc: Nicolas Pitre; u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH1/2] Kirkwood: add Marvell 
> Kirkwood gpio driver
> 
> Hello Jean-Christophe,
> 
> Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 14:45 Mon 29 Jun     , Dieter Kiermaier wrote:
> >> Hi again,
> >>
> >> Here is my first out of 2 patches which adds gpio support 
> to arch/kirkwood.
> >> Any suggestions?
> >>
> >> Cheers,
> >> Dieter
> >>
> >>
> >> >From fcdea0c7bba3c25a1fb183bbcaf6d1a4ec32a157 Mon Sep 17 00:00:00 
> >> >2001
> >> From: Dieter Kiermaier <dk-arm-linux at gmx.de>
> >> Date: Mon, 29 Jun 2009 14:22:13 +0200
> >> Subject: [PATCH] Kirkwood: add Marvell Kirkwood gpio driver
> >>
> >>
> >> Signed-off-by: Dieter Kiermaier <dk-arm-linux at gmx.de>
> > looks fine
> > Prafulla & nico for you?
Okay, Ack, mostly code coming from Linux :-)

Regards..
Prafulla . .

> 
> I actually tested this driver on the suen3 board with the i2c 
> bitbang driver and it works fine :-), so I do a:
> 
> Tested-by: Heiko Schocher <hs at denx.de>
> 
> bye
> Heiko
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, 
> Germany _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>