[U-Boot] [PATCH 3/3] 83xx, kmeter1: added NAND support

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs at denx.de>
---
 board/keymile/kmeter1/Makefile |    2 +-
 board/keymile/kmeter1/nand.c   |  153 ++++++++++++++++++++++++++++++++++++++++
 include/configs/kmeter1.h      |    5 ++
 3 files changed, 159 insertions(+), 1 deletions(-)
 create mode 100644 board/keymile/kmeter1/nand.c

diff --git a/board/keymile/kmeter1/Makefile b/board/keymile/kmeter1/Makefile
index 12a1518..0eaa234 100644
--- a/board/keymile/kmeter1/Makefile
+++ b/board/keymile/kmeter1/Makefile
@@ -28,7 +28,7 @@ endif

 LIB	= $(obj)lib$(BOARD).a

-COBJS	+= $(BOARD).o ../common/common.o
+COBJS	+= $(BOARD).o ../common/common.o nand.o

 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/keymile/kmeter1/nand.c b/board/keymile/kmeter1/nand.c
new file mode 100644
index 0000000..0675b53
--- /dev/null
+++ b/board/keymile/kmeter1/nand.c
@@ -0,0 +1,153 @@
+/*
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NAND)
+
+#include <nand.h>
+#include <asm/io.h>
+
+#define CONFIG_NAND_MODE_REG	(CONFIG_SYS_NAND_BASE + 0x20000)
+#define CONFIG_NAND_DATA_REG	(CONFIG_SYS_NAND_BASE + 0x30000)
+
+#define read_mode()	in_8((volatile unsigned char __iomem *) \
+				CONFIG_NAND_MODE_REG)
+#define write_mode(val)	out_8((volatile unsigned char __iomem *) \
+				CONFIG_NAND_MODE_REG, val)
+#define read_data()	in_8((volatile unsigned char __iomem *) \
+				CONFIG_NAND_DATA_REG)
+#define write_data(val)	out_8((volatile unsigned char __iomem *) \
+				CONFIG_NAND_DATA_REG, val)
+
+#define KPN_RDY2	(1 << 7)
+#define KPN_RDY1	(1 << 6)
+#define KPN_WPN		(1 << 4)
+#define KPN_CE2N	(1 << 3)
+#define KPN_CE1N	(1 << 2)
+#define KPN_ALE		(1 << 1)
+#define KPN_CLE		(1 << 0)
+
+#define KPN_DEFAULT_CHIP_DELAY 50
+
+static int kpn_chip_ready(void)
+{
+	if (read_mode() & KPN_RDY1)
+		return 1;
+
+	return 0;
+}
+
+static void kpn_wait_rdy(void)
+{
+	int cnt = 1000000;
+
+	while (--cnt && !kpn_chip_ready())
+		udelay(1);
+
+	if (!cnt)
+		printf ("timeout while waiting for RDY\n");
+}
+
+static void kpn_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	u8	reg_val = read_mode();
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if ( ctrl & NAND_NCE)
+			reg_val = reg_val & ~KPN_CE1N;
+		else
+			reg_val = reg_val | KPN_CE1N;
+		write_mode(reg_val);
+	}
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	reg_val = reg_val & ~(KPN_ALE + KPN_CLE);
+	if (ctrl & NAND_CLE)
+		reg_val = reg_val | KPN_CLE;
+	if (ctrl & NAND_ALE)
+		reg_val = reg_val | KPN_ALE;
+
+	/* select register */
+	write_mode(reg_val);
+
+	/* write cmd */
+	write_data(cmd);
+
+	/* deselect register */
+	reg_val = reg_val & ~(KPN_ALE + KPN_CLE);
+	write_mode(reg_val);
+
+	/* wait until flash is ready */
+	kpn_wait_rdy();
+}
+
+static u_char kpn_nand_read_byte(struct mtd_info *mtd)
+{
+	return read_data();
+}
+
+static void kpn_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		write_data(buf[i]);
+		kpn_wait_rdy();
+	}
+}
+
+static void kpn_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		buf[i] = read_data();
+	}
+}
+
+static int kpn_nand_dev_ready(struct mtd_info *mtd)
+{
+	kpn_wait_rdy();
+
+	return 1;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->ecc.mode = NAND_ECC_SOFT;
+
+	/* Reference hardware control function */
+	nand->cmd_ctrl  = kpn_nand_hwcontrol;
+	nand->read_byte  = kpn_nand_read_byte;
+	nand->write_buf  = kpn_nand_write_buf;
+	nand->read_buf   = kpn_nand_read_buf;
+	nand->dev_ready  = kpn_nand_dev_ready;
+	nand->chip_delay = KPN_DEFAULT_CHIP_DELAY;
+
+	/* reset mode register */
+	write_mode(KPN_CE1N + KPN_CE2N + KPN_WPN);
+	return 0;
+}
+#endif
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 811ba88..6471103 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -324,6 +324,11 @@
 #define CONFIG_SYS_DTT_HYSTERESIS	3
 #define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)

+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		CONFIG_SYS_PIGGY_BASE
+#endif
+
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
 #endif
-- 
1.6.0.6

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany