[U-Boot] [PATCH 2/3] i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c

[Heiko Schocher]

Hello Heiko

Heiko Schocher wrote:
> This patch adds the possibility to call a board specific
> i2c bus reset routine for the fsl_i2c bus driver, and adds
> this option for the keymile kmeter1 board.
> 
> The deblock sequence for this board is implemented and
> tested in the following way:
> 
> CR = 0x20 (release SDA and SCL pin)
> CR = 0xa0 (start read)
> dummy read
> dummy read
> if 2. dummy read == 0x00
> 	3. dummy read
> 
> CR = 0x80 (SDA and SCL now 1 SR = 0x86)
> CR = 0x00 (Modul reset SR=0x81)
> CR = 0x80 (SDA and SCL = 1, SR = 0x81)
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
>  board/keymile/common/common.c |   20 ++++++++++++++++++++
>  drivers/i2c/fsl_i2c.c         |    6 ++++++
>  include/configs/kmeter1.h     |    1 -
>  3 files changed, 26 insertions(+), 1 deletions(-)

Applied to u-boot-i2c.git

bye
heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany