[U-Boot] [PULL] u-boot-mpc5xxx pull request

[Wolfgang Denk]

The following changes since commit 3672cd5c3b53d219d33345eebad4e25ad5bf6d52:
  Wolfgang Denk (1):
        MAINTAINERS: fix sorting, remove duplicates.

are available in the git repository at:

  git://git.denx.de/u-boot-mpc5xxx.git master

Jon Smirl (1):
      board support patch for phyCORE-MPC5200B-tiny

Wolfgang Denk (10):
      MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF
      MPC512x: Add MSCAN1...4 Clock Control Registers
      mecp5123: fix build error
      MPC512x: factor out common code
      aria: adjust memory controller initialization
      mecp5123: cleanup - remove dead code
      MPC512x: fix typo in comment listing the NAND driver name
      aria: enable NAND flash support
      aria: add JFFS2 and MTDPARTS support; adjust flash map
      mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map

 MAINTAINERS                             |    4 +
 MAKEALL                                 |    1 +
 Makefile                                |    9 +
 board/davedenx/aria/aria.c              |  125 +-------------------------
 board/esd/mecp5123/mecp5123.c           |  117 ++-----------------------
 board/freescale/mpc5121ads/mpc5121ads.c |  118 ++-----------------------
 board/phytec/pcm030/Makefile            |   50 ++++
 board/phytec/pcm030/config.mk           |   41 ++++
 board/phytec/pcm030/mt46v32m16-75.h     |   37 +++
 board/phytec/pcm030/pcm030.c            |  220 +++++++++++++++++
 cpu/mpc512x/Makefile                    |   10 ++-
 cpu/mpc512x/fixed_sdram.c               |  113 ++++++++++++++++++++++++
 cpu/mpc5xxx/ide.c                       |    3 +
 doc/README.phytec.pcm030                |   46 ++++
 include/asm-ppc/immap_512x.h            |    9 +-
 include/asm-ppc/mpc512x.h               |   57 ++++++++++++
 include/configs/aria.h                  |  146 +++++++++++++++++++++++++++----
 include/configs/mecp5123.h              |   11 +--
 include/configs/mpc5121ads.h            |   50 +++++++++--
 include/configs/pcm030.h                |  444 +++++++++++++++++++++++++++++++++++
 create mode 100644 board/phytec/pcm030/Makefile
 create mode 100644 board/phytec/pcm030/config.mk
 create mode 100644 board/phytec/pcm030/mt46v32m16-75.h
 create mode 100644 board/phytec/pcm030/pcm030.c
 create mode 100644 cpu/mpc512x/fixed_sdram.c
 create mode 100644 doc/README.phytec.pcm030
 create mode 100644 include/asm-ppc/mpc512x.h
 create mode 100644 include/configs/pcm030.h
 20 files changed, 1229 insertions(+), 382 deletions(-)

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
My play was a complete success.  The audience was a failure.