[U-Boot] [PULL] u-boot-mpc5xxx pull request

[Wolfgang Denk]

Dear Wolfgang Denk,

In message <20090713221430.330AA832E416 at gemini.denx.de> you wrote:
> The following changes since commit 3672cd5c3b53d219d33345eebad4e25ad5bf6d52:
>   Wolfgang Denk (1):
>         MAINTAINERS: fix sorting, remove duplicates.
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc5xxx.git master
> 
> Jon Smirl (1):
>       board support patch for phyCORE-MPC5200B-tiny
> 
> Wolfgang Denk (10):
>       MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF
>       MPC512x: Add MSCAN1...4 Clock Control Registers
>       mecp5123: fix build error
>       MPC512x: factor out common code
>       aria: adjust memory controller initialization
>       mecp5123: cleanup - remove dead code
>       MPC512x: fix typo in comment listing the NAND driver name
>       aria: enable NAND flash support
>       aria: add JFFS2 and MTDPARTS support; adjust flash map
>       mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map
> 
>  MAINTAINERS                             |    4 +
>  MAKEALL                                 |    1 +
>  Makefile                                |    9 +
>  board/davedenx/aria/aria.c              |  125 +-------------------------
>  board/esd/mecp5123/mecp5123.c           |  117 ++-----------------------
>  board/freescale/mpc5121ads/mpc5121ads.c |  118 ++-----------------------
>  board/phytec/pcm030/Makefile            |   50 ++++
>  board/phytec/pcm030/config.mk           |   41 ++++
>  board/phytec/pcm030/mt46v32m16-75.h     |   37 +++
>  board/phytec/pcm030/pcm030.c            |  220 +++++++++++++++++
>  cpu/mpc512x/Makefile                    |   10 ++-
>  cpu/mpc512x/fixed_sdram.c               |  113 ++++++++++++++++++++++++
>  cpu/mpc5xxx/ide.c                       |    3 +
>  doc/README.phytec.pcm030                |   46 ++++
>  include/asm-ppc/immap_512x.h            |    9 +-
>  include/asm-ppc/mpc512x.h               |   57 ++++++++++++
>  include/configs/aria.h                  |  146 +++++++++++++++++++++++++++----
>  include/configs/mecp5123.h              |   11 +--
>  include/configs/mpc5121ads.h            |   50 +++++++++--
>  include/configs/pcm030.h                |  444 +++++++++++++++++++++++++++++++++++
>  create mode 100644 board/phytec/pcm030/Makefile
>  create mode 100644 board/phytec/pcm030/config.mk
>  create mode 100644 board/phytec/pcm030/mt46v32m16-75.h
>  create mode 100644 board/phytec/pcm030/pcm030.c
>  create mode 100644 cpu/mpc512x/fixed_sdram.c
>  create mode 100644 doc/README.phytec.pcm030
>  create mode 100644 include/asm-ppc/mpc512x.h
>  create mode 100644 include/configs/pcm030.h
>  20 files changed, 1229 insertions(+), 382 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only person who always got his work done by Friday
                                                 was Robinson Crusoe.