[U-Boot] U-Boot 1.3.3 for the Toradex PXA270 (BSP 5.0)

[Velu pandian]

Hi everyone,

My name is Velu and I am from the University of Michigan. Currently I am
leading one of the sub-systems where we are trying to use the Toradex PXA270
as a micro controller for a cube shaped satellite (CUBESAT) which is to be
launched by the end of this year. I have been runnign into problems
compiling u-boot for the PXA 270. Below is my terminal output when I run the
make file. I would greatly apreciate it if you could provide me with some
support so that I can proceed with finishing my task for the summer.

---------------------------------------------------------------------------------------------------------------------
[root at localhost u-boot-1.3.3-colibri_pxa270]# pwd
/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270
[root at localhost u-boot-1.3.3-colibri_pxa270]# ls
api                 CHANGELOG                      CREDITS   i386_config.mk
lib_generic     lib_nios2       MAKEALL               net
README
api_examples        CHANGELOG-before-U-Boot-1.1.5  disk      include
lib_i386        lib_ppc         Makefile              nios2_config.mk
rules.mk
arm_config.mk       common                         doc       lib_arm
lib_m68k        lib_sh          microblaze_config.mk  nios_config.mk
sh_config.mk
avr32_config.mk     config.mk                      drivers   lib_avr32
lib_microblaze  lib_sparc       mips_config.mk        onenand_ipl
sparc_config.mk
blackfin_config.mk  COPYING                        examples  lib_blackfin
lib_mips        m68k_config.mk  mkconfig              post             tools
board               cpu                            fs        libfdt
lib_nios        MAINTAINERS     nand_spl              ppc_config.mk
[root at localhost u-boot-1.3.3-colibri_pxa270]# make distclean
[root at localhost u-boot-1.3.3-colibri_pxa270]# make colibri_config
Configuring for colibri board...
[root at localhost u-boot-1.3.3-colibri_pxa270]# make
make: arm-linux-gcc: Command not found
Generating include/autoconf.mk.dep
/bin/sh: line 3: arm-linux-gcc: command not found
for dir in tools examples api_examples ; do make -C $dir _depend ; done
make[1]: arm-linux-gcc: Command not found
make[1]: Entering directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/tools'
ln -s ../common/environment.c environment.c
ln -s ../include/zlib.h zlib.h
ln -s ../lib_generic/crc32.c crc32.c
ln -s ../lib_generic/md5.c md5.c
ln -s ../lib_generic/sha1.c sha1.c
ln -s ../common/image.c image.c
if [ ! -f mkimage.h ] ; then \
                        ln -s ../tools/mkimage.h mkimage.h; \
                fi
if [ ! -f fdt_host.h ] ; then \
                        ln -s ../tools/fdt_host.h fdt_host.h; \
                fi
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
/bin/sh: line 2: gcc: command not found
make[1]: *** No rule to make target `.depend', needed by `_depend'.  Stop.
make[1]: Leaving directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/tools'
make[1]: arm-linux-gcc: Command not found
make[1]: Entering directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/examples'
/bin/sh: arm-linux-gcc: command not found
dirname: missing operand
Try `dirname --help' for more information.
/bin/sh: arm-linux-gcc: command not found
dirname: missing operand
Try `dirname --help' for more information.
/bin/sh: line 2: arm-linux-gcc: command not found
/bin/sh: line 2: arm-linux-gcc: command not found
make[1]: *** No rule to make target `.depend', needed by `_depend'.  Stop.
make[1]: Leaving directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/examples'
make[1]: arm-linux-gcc: Command not found
make[1]: Entering directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/api_examples'
/bin/sh: arm-linux-gcc: command not found
dirname: missing operand
Try `dirname --help' for more information.
make[1]: Nothing to be done for `_depend'.
make[1]: Leaving directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/api_examples'
Generating include/autoconf.mk
/bin/sh: line 3: arm-linux-gcc: command not found
make -C tools all
make[1]: arm-linux-gcc: Command not found
make[1]: Entering directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/tools'
gcc -Wall -pedantic -idirafter
/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/include -idirafter
/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/include2 -idirafter
/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/include
-DTEXT_BASE=0xa3f80000 -DUSE_HOSTCC -O -c -o img2srec.o img2srec.c
make[1]: gcc: Command not found
make[1]: *** [img2srec.o] Error 127
make[1]: Leaving directory
`/root/Desktop/bsp50/src/u-boot-1.3.3-colibri_pxa270/tools'
make: *** [tools] Error 2
[root at localhost u-boot-1.3.3-colibri_pxa270]#

---------------------------------------------------------------------------------------------------------------------

Thank you very much. I apreciate your help.

Best,
Velu

Ravichandran Velu Pandian
Dept. of Electrical Engineering and Computer Science
University of Michigan - College of Engineering
rakave at umich.edu - 734-604-0869