[U-Boot] [PATCH v7 2/6] Marvell Sheevaplug Board support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Sat Jul 18 19:41:08 CEST 2009
On 20:58 Thu 16 Jul , Prafulla Wadaskar wrote:
> Reference:
> http://plugcomputer.org/
> http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
>
> This patch is tested for-
> 1. Boot from DRAM/NAND flash
> 2. File transfer using tftp
> 3. NAND flash read/write/erase
> 4. Linux kernel and RFS Boot from NAND
> 5. Enabled USB PHY init for kernel need
> 6. Boot from USB supported
>
> Note: to boot Kirkwood kernel with USB support,
> you should add "usb start" in the boot sequence
>
> Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
Applied to u-boot-arm
Best Regards,
J.
More information about the U-Boot
mailing list