[U-Boot] [PATCH v7 2/6] Marvell Sheevaplug Board support

Prafulla Wadaskar prafulla at marvell.com
Sun Jul 19 06:56:48 CEST 2009


 

> -----Original Message-----
> From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com] 
> Sent: Saturday, July 18, 2009 11:11 PM
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de; Manas Saksena; Ronen Shitrit; 
> Nicolas Pitre; Ashish Karkare; Prabhanjan Sarnaik; Lennert Buijtenhek
> Subject: Re: [U-Boot] [PATCH v7 2/6] Marvell Sheevaplug Board support
> 
> On 20:58 Thu 16 Jul     , Prafulla Wadaskar wrote:
> > Reference:
> > http://plugcomputer.org/
> > http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
> > 
> > This patch is tested for-
> > 1. Boot from DRAM/NAND flash
> > 2. File transfer using tftp
> > 3. NAND flash read/write/erase
> > 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for 
> > kernel need 6. Boot from USB supported
> > 
> > Note: to boot Kirkwood kernel with USB support,
> > 	you should add "usb start" in the boot sequence
> > 
> > Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
> Applied to u-boot-arm
Thank you Jean..
Regards..
Prafulla . .

> 
> Best Regards,
> J.
> 


More information about the U-Boot mailing list