[U-Boot] nand_bbt: Out of memory for large block NAND

[Stefan Roese]

On Monday 27 July 2009 02:35:00 J.C. Wren wrote:
> The NAND bad block code is throwing an error at startup of 'nand_bbt: Out
> of memory' for large block NAND flash (block size of 128K).
> The vmalloc() call is trying to allocate 135,168 bytes.
> CONFIG_SYS_MALLOC_LEN is (0x10000 + 128*1024).
>
> Bumping CONFIG_SYS_MALLOC_LEN to (0x20000 + 128*1024) wasn't sufficient,
> however (0x40000 + 128*1024) was.
>
> Any recommendations what this should be adjusted to? The system has 256MB
> of RAM and a single 512MB NAND.

I would use something like 1MB. This will give you enough for other malloc-
intensive things like UBIFS as well.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================