[U-Boot] [PATCH v2 10/10] MPC512x: add support for ARIA board

Stefan Roese sr at denx.de
Tue Jun 2 11:12:04 CEST 2009


Hi Wolfgang,

On Saturday 16 May 2009 10:47:46 Wolfgang Denk wrote:
> ARIA is a MPC5121E based COM Express module by Dave/DENX.
>
> Signed-off-by: Wolfgang Denk <wd at denx.de>
> Cc: John Rigby <jcrigby at gmail.com>

Please find some mostly nitpicking comments below. (Sorry about the late 
review - I just stumbled over a few issue while using this port as basis for a 
port for an MPC5123 board from esd).

<snip>

> diff --git a/board/davedenx/aria/Makefile b/board/davedenx/aria/Makefile
> new file mode 100644
> index 0000000..48c2a83
> --- /dev/null
> +++ b/board/davedenx/aria/Makefile
> @@ -0,0 +1,53 @@
> +#
> +# (C) Copyright 2009 Wolfgang Denk <wd at denx.de>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +$(shell mkdir -p $(OBJTREE)/board/freescale/common)

Is this really needed?

> +
> +LIB	= $(obj)lib$(BOARD).a
> +
> +COBJS-y	:= $(BOARD).o
> +
> +COBJS	:= $(COBJS-y)
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS)
> +
> +	$(AR) $(ARFLAGS) $@ $(OBJS)

Please remove this empty line above.

> +
> +clean:
> +	rm -f $(SOBJS) $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c
> new file mode 100644
> index 0000000..4d26713
> --- /dev/null
> +++ b/board/davedenx/aria/aria.c
> @@ -0,0 +1,317 @@
> +/*
> + * (C) Copyright 2009 Wolfgang Denk <wd at denx.de>
> + * (C) Copyright 2009 Dave Srl www.dave.eu
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <asm/bitops.h>
> +#include <command.h>
> +#include <asm/io.h>
> +#include <asm/processor.h>
> +#include <fdt_support.h>
> +#ifdef CONFIG_MISC_INIT_R
> +#include <i2c.h>
> +#endif
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +extern void ide_set_reset(int idereset);
> +
> +/* Clocks in use */
> +#define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
> +			 CLOCK_SCCR1_LPC_EN |				\
> +			 CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |	\
> +			 CLOCK_SCCR1_PSCFIFO_EN |			\
> +			 CLOCK_SCCR1_DDR_EN |				\
> +			 CLOCK_SCCR1_FEC_EN |				\
> +			 CLOCK_SCCR1_PATA_EN |				\
> +			 CLOCK_SCCR1_PCI_EN |				\
> +			 CLOCK_SCCR1_TPR_EN)
> +
> +#define SCCR2_CLOCKS_EN	(CLOCK_SCCR2_MEM_EN |		\
> +			 CLOCK_SCCR2_SPDIF_EN |		\
> +			 CLOCK_SCCR2_DIU_EN |		\
> +			 CLOCK_SCCR2_I2C_EN)
> +
> +#define CSAW_START(start)	((start) & 0xFFFF0000)
> +#define CSAW_STOP(start, size)	(((start) + (size) - 1) >> 16)
> +
> +long int fixed_sdram(void);
> +
> +int board_early_init_f(void)
> +{
> +	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
> +	u32 spridr;
> +
> +	/*
> +	 * Initialize Local Window for the On Board FPGA access
> +	 */
> +	out_be32(&im->sysconf.lpcs2aw,
> +		CSAW_START(CONFIG_SYS_ARIA_FPGA_BASE) |
> +		CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
> +	);
> +	out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
> +
> +	/*
> +	 * According to MPC5121e RM, configuring local access windows should
> +	 * be followed by a dummy read of the config register that was
> +	 * modified last and an isync
> +	 */
> +	in_be32(&im->sysconf.lpcs2aw);
> +	__asm__ __volatile__ ("isync");
> +
> +	/*
> +	 * Initialize Local Window for the On Board SRAM access
> +	 */
> +	out_be32(&im->sysconf.lpcs6aw,
> +		CSAW_START(CONFIG_SYS_ARIA_SRAM_BASE) |
> +		CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
> +	);
> +	out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
> +
> +	/*
> +	 * According to MPC5121e RM, configuring local access windows should
> +	 * be followed by a dummy read of the config register that was
> +	 * modified last and an isync
> +	 */
> +	in_be32(&im->sysconf.lpcs6aw);
> +	__asm__ __volatile__ ("isync");
> +
> +	/*
> +	 * Configure Flash Speed
> +	 */
> +	out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
> +
> +	spridr = in_be32(&im->sysconf.spridr);
> +
> +	if (SVR_MJREV(spridr) >= 2) {
> +		out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
> +	}

Curly braces can be removed. And I suggest to add an empty line here.

> +	/*
> +	 * Enable clocks
> +	 */
> +	out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
> +	out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
> +#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
> +	setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
> +#endif
> +
> +	return 0;
> +}
> +
> +phys_size_t initdram (int board_type)
> +{
> +	return fixed_sdram();
> +}
> +
> +/*
> + * fixed sdram init:
> + * The board doesn't use memory modules that have serial presence
> + * detect or similar mechanism for discovery of the DRAM settings
> + */
> +long int fixed_sdram (void)
> +{
> +	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
> +	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
> +	u32 msize_log2 = __ilog2(msize);
> +	u32 i;
> +
> +	/* Initialize IO Control */
> +	out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
> +
> +	/* Initialize DDR Local Window */
> +	out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
> +	out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
> +
> +	/*
> +	 * According to MPC5121e RM, configuring local access windows should
> +	 * be followed by a dummy read of the config register that was
> +	 * modified last and an isync
> +	 */
> +	in_be32(&im->sysconf.ddrlaw.ar);
> +	__asm__ __volatile__ ("isync");
> +
> +	/* Enable DDR */
> +	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
> +
> +	/* Initialize DDR Priority Manager */
> +	out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
> +	out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
> +	out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
> +	out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
> +	out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
> +	out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
> +	out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
> +	out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
> +	out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
> +	out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
> +	out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
> +	out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
> +	out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
> +	out_be32(&im->mddrc.lut_table0_alternate_upper,
> CONFIG_SYS_MDDRCGRP_LUT0_AU);
> +	out_be32(&im->mddrc.lut_table0_alternate_lower,
> CONFIG_SYS_MDDRCGRP_LUT0_AL);
> +	out_be32(&im->mddrc.lut_table1_alternate_upper,
> CONFIG_SYS_MDDRCGRP_LUT1_AU);
> +	out_be32(&im->mddrc.lut_table1_alternate_lower,
> CONFIG_SYS_MDDRCGRP_LUT1_AL);
> +	out_be32(&im->mddrc.lut_table2_alternate_upper,
> CONFIG_SYS_MDDRCGRP_LUT2_AU);
> +	out_be32(&im->mddrc.lut_table2_alternate_lower,
> CONFIG_SYS_MDDRCGRP_LUT2_AL);
> +	out_be32(&im->mddrc.lut_table3_alternate_upper,
> CONFIG_SYS_MDDRCGRP_LUT3_AU);
> +	out_be32(&im->mddrc.lut_table3_alternate_lower,
> CONFIG_SYS_MDDRCGRP_LUT3_AL);
> +	out_be32(&im->mddrc.lut_table4_alternate_upper,
> CONFIG_SYS_MDDRCGRP_LUT4_AU);
> +	out_be32(&im->mddrc.lut_table4_alternate_lower,
> CONFIG_SYS_MDDRCGRP_LUT4_AL); +
> +	/* Initialize MDDRC */
> +	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
> +	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
> +	out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
> +	out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
> +
> +	/* Initialize DDR */
> +	for (i = 0; i < 10; i++)
> +		out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
> +	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
> +
> +	/* Start MDDRC */
> +	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
> +	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
> +
> +	return msize;
> +}
> +
> +int misc_init_r(void)
> +{
> +	u32 tmp;
> +	extern int mpc5121_diu_init(void);

Please move prototype declaration to top of file or to some header.

> +
> +	/* we use I2C-2 for on-board eeprom */
> +	i2c_set_bus_num(2);
> +
> +	tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE);
> +	printf("FPGA:  %u-%u.%u.%u\n",
> +		(tmp & 0xFF000000) >> 24,
> +		(tmp & 0x00FF0000) >> 16,
> +		(tmp & 0x0000FF00) >>  8,
> +		 tmp & 0x000000FF
> +	);
> +
> +#ifdef CONFIG_FSL_DIU_FB
> +#if	!(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
> +	mpc5121_diu_init();
> +#endif
> +#endif
> +
> +	return 0;
> +}

Insert empty line here.

> +static  iopin_t ioregs_init[] = {
> +	/*
> +	 * FEC
> +	 */
> +
> +	/* FEC on PSCx_x*/
> +	{
> +		offsetof(struct ioctrl512x, io_control_psc0_0), 5, 0,
> +		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> +	},
> +	{
> +		offsetof(struct ioctrl512x, io_control_psc1_0), 10, 0,
> +		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> +	},
> +	{
> +		offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
> +		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> +	},
> +
> +	/*
> +	 * DIU
> +	 */
> +	/* FUNC2=DIU CLK */
> +	{
> +		offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
> +		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> +	},
> +	/* FUNC2=DIU_HSYNC */
> +	{
> +		offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
> +		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> +	},
> +	/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
> +	{
> +		offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
> +		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> +	},
> +	/*
> +	 * On board SRAM
> +	 */
> +	/* FUNC2=/LPC CS6 */
> +	{
> +		offsetof(struct ioctrl512x, io_control_j1850_rx), 1, 0,
> +		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> +		IO_PIN_PUE(1) | IO_PIN_ST(1) | IO_PIN_DS(3)
> +	},
> +};
> +
> +
> +int checkboard (void)
> +{
> +	puts("Board: ARIA\n");
> +
> +	/* initialize function mux & slew rate IO inter alia on IO Pins  */
> +
> +	iopin_initialize(ioregs_init,
> +			 sizeof(ioregs_init) / sizeof(ioregs_init[0]));

Please use ARRAY_SIZE(ioregs_init) here.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================


More information about the U-Boot mailing list