June 2009 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jun 1 00:11:52 CEST 2009
Ending: Tue Jun 30 23:22:45 CEST 2009
Messages: 1728

• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [U-BOot] new cpu(Ingenic), new board(PI)   Wolfgang Denk
• [U-Boot] [PATCH 2/3] mips: add endianness support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mips: unify lds   Wolfgang Denk
• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [RFC PATCH 1/2] sh: make lds more generic   Nobuhiro Iwamatsu
• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH v3 1/3][Net][ARM] Moved Davinci Ethernet driver to drivers/net   Ben Warren
• [U-Boot] [PATCH v3 2/3][Net][ARM] Initial cleanup of Davinci Ethernet driver   Ben Warren
• [U-Boot] [PATCH v3 3/3][Net][ARM] Switched davinci_emac Ethernet driver to use newer API   Ben Warren
• [U-Boot] [PATCH] net: Add Marvell Kirkwood gigabit ethernet driver   Ben Warren
• [U-Boot] [PATCH] ppc4xx/net: Fix MDIO clock setup   Ben Warren
• [U-Boot] [PATCH/next] Blackfin: bfin_mac: do portmuxing earlier to allow board override   Ben Warren
• [U-Boot] [PATCH]   Kim, Heung Jun
• [U-Boot] [PATCH] omap3 L2-cache enable/disable function to omap3 dependent code   Kim, Heung Jun
• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Kim, Heung Jun
• [U-Boot] [PATCH]   Wolfgang Denk
• [U-Boot] [PATCH] omap3 L2-cache enable/disable function to omap3 dependent code   Wolfgang Denk
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Wolfgang Denk
• [U-Boot] uboot under cygwin   Stas Desyatnlkov
• [U-Boot] [U-BOot] new cpu(Ingenic), new board(PI)   xiangfu
• [U-Boot] unsubscribe   Malenboim Vadim
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim, Heung Jun
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim, Heung Jun
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Renaud barbier
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim, Heung Jun
• [U-Boot] From European Shell Grants   EUROPEAN SHELL GRANTS
• [U-Boot] [PATCH] Adds WATCHDOG_RESET() function call to lib_m68k dtimer_interrupt.   Tsi-Chung Liew
• [U-Boot] [PATCH] Compier warning cleanup   TsiChung Liew
• [U-Boot] [PATCH] Coldfire M5271: Activate u-boot system timer interrupt.   TsiChung Liew
• [U-Boot] [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.   TsiChung Liew
• [U-Boot] potential Uboot Ping problem   Steven Zedeck
• [U-Boot] potential Uboot Ping problem   Premi, Sanjeev
• [U-Boot] potential Uboot Ping problem   Steven Zedeck
• [U-Boot] [PATCH V3] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] USB gadget interface from cdc branch into mainline   Remy Bohmer
• [U-Boot] uboot under cygwin   Kim Phillips
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim Phillips
• [U-Boot] Large Block USB Flash Drive Problem   Remy Bohmer
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim, Heung Jun
• [U-Boot] [PATCH 2/3] ZOOM2 detect the version of the zoom2 board at runtime.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim Phillips
• [U-Boot] [PATCH v2 3/6] mpc83xx: USB: Reorganized its support   Remy Bohmer
• [U-Boot] [PATCH 4/6] mpc85xx: USB: Add support   Remy Bohmer
• [U-Boot] [PATCH v2 6/6] mpc85xx: 8536ds: Add USB related CONFIGs   Remy Bohmer
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Dirk Behme
• [U-Boot] [U-BOOT] nand merge problem   Scott Wood
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Scott Wood
• [U-Boot] [PATCH] The omap3 L2 cache enable/disable function to omap3 dependent code   Kim Phillips
• [U-Boot] REJECT: Too many recipients to the message   Wolfgang Denk
• [U-Boot] [PATCH V3] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH V2] Add display cpuinfo for Atmel at91 arm926ejs based cores   Remy Bohmer
• [U-Boot] [PATCH] Enable display CPU-Info for at91sam9261   Remy Bohmer
• [U-Boot] REJECT: Too many recipients to the message   Scott Wood
• [U-Boot] REJECT: Too many recipients to the message   Jerry Van Baren
• [U-Boot] REJECT: Too many recipients to the message   Scott Wood
• [U-Boot] [PATCH V4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] UBIFS will not build for Davinci (2006.06-rc2)   kevin_springle at telus.net
• [U-Boot] [PATCH V2] Add display cpuinfo for Atmel at91 arm926ejs based cores   Stelian Pop
• [U-Boot] REJECT: Too many recipients to the message   Wolfgang Denk
• [U-Boot] REJECT: Too many recipients to the message   Wolfgang Denk
• [U-Boot] [PATCH] Enable display CPU-Info for at91sam9261   Stelian Pop
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH V2] Add display cpuinfo for Atmel at91 arm926ejs based cores   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH] Enable display CPU-Info for at91sam9261   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] REJECT: Too many recipients to the message   T Ziomek
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Scott Wood
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] REJECT: Too many recipients to the message   Wolfgang Denk
• [U-Boot] REJECT: Too many recipients to the message   T Ziomek
• [U-Boot] REJECT: Too many recipients to the message   Wolfgang Denk
• [U-Boot] potential Uboot Ping problem   Peter Tyser
• [U-Boot] REJECT: Too many recipients to the message   Scott Wood
• [U-Boot] [PATCH] Blackfin: add jtagconsole helper script   Mike Frysinger
• [U-Boot] REJECT: Too many recipients to the message   T Ziomek
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Shinya Kuribayashi
• [U-Boot] potential Uboot Ping problem   Steven Zedeck
• [U-Boot] USB gadget interface from cdc branch into mainline   Raghu
• [U-Boot] [U-BOOT] nand merge problem   xiangfu
• [U-Boot] REJECT: Too many recipients to the message   HeungJun, Kim
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Stefan Roese
• [U-Boot] [PATCH v1] arm: Kirkwood: Basic SOCs support   Prafulla Wadaskar
• [U-Boot] UBIFS will not build for Davinci (2006.06-rc2)   Stefan Roese
• [U-Boot] pci bus scan in u-boot-1.0.2   xiaoguizi007
• [U-Boot] [PATCH v2 3/6] mpc83xx: USB: Reorganized its support   Mahajan Vivek-B08308
• [U-Boot] REJECT: Too many recipients to the message   Stefan Roese
• [U-Boot] No nandflash found if CONFIG_CMD_UBI is enabled.   Anders Darander
• [U-Boot] No nandflash found if CONFIG_CMD_UBI is enabled.   Stefan Roese
• [U-Boot] potential Uboot Ping problem   Premi, Sanjeev
• [U-Boot] pci bus scan in u-boot-1.0.2   Wolfgang Denk
• [U-Boot] MPC8313ERDB board reset problem   Deepak Gopalakrishnan
• [U-Boot] [PATCH v2] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v2 10/10] MPC512x: add support for ARIA board   Stefan Roese
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Pierre Savary
• [U-Boot] [PATCH v1] arm: Kirkwood: Basic SOCs support   Prafulla Wadaskar
• [U-Boot] [PATCH v2 2/5] spi: Add Marvell Kirkwood SPI driver   Prafulla Wadaskar
• [U-Boot] [PATCH] OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change   Matthias Ludwig
• [U-Boot] I wonder "---" in the patch file generated by the git-format-patch   Kim, Heung Jun
• [U-Boot] [PATCH] Marvell MV88E1116 PHY Driver support   Prafulla Wadaskar
• [U-Boot] [PATCH] update nand.h to support address more than 0x80000000   adrian wen
• [U-Boot] [PATCH] move L2 cache enable/disable function to cache.c in the omap3 SoC directory   Kim, Heung Jun
• [U-Boot] Enable mtdparts   Vijay Nikam
• [U-Boot] [PATCH v2] Marvell Sheevaplug Board support   Wolfgang Denk
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Cote, Sylvain
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Pierre Savary
• [U-Boot] [PATCH 1/2] Create the S5PC100 SoC code under the cpu/arm_cortesa8/   Kim, Heung Jun
• [U-Boot] [PATCH 2/2] Create the S5PC100 SoC header under the include/asm-arm/arch-s5pc100   Kim, Heung Jun
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Cote, Sylvain
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Stefan Roese
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Pierre Savary
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Stefan Roese
• [U-Boot] [PATCH v2 3/5] net: Add Marvell Kirkwood gigabit ethernet driver   Prafulla Wadaskar
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Pierre Savary
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Stefan Roese
• [U-Boot] [PATCH v3 4/5] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] mpc512x: Fix PSC divisor calculation for baudrate setting   Stefan Roese
• [U-Boot] [PATCH 2/2] mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code   Stefan Roese
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] I wonder "---" in the patch file generated by the git-format-patch   Andy Fleming
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Dirk Behme
• [U-Boot] [PATCH v2 3/6] mpc83xx: USB: Reorganized its support   Andy Fleming
• [U-Boot] JFFS2 with NAND flash is very SLOW ...   Pierre Savary
• [U-Boot] [PATCH 1/2] Create the S5PC100 SoC code under the cpu/arm_cortesa8/   Dirk Behme
• [U-Boot] [PATCH] mmc: fix SD card SCR register decoding on little endian systems   Herrmann Ulrich
• [U-Boot] [PATCH 2/2] Create the S5PC100 SoC header under the include/asm-arm/arch-s5pc100   Dirk Behme
• [U-Boot] [PATCH] Assigned a static SMI address to all UECs TBIPA address.   Richard Retanubun
• [U-Boot] Spanish888. Com Official Winnings Notifications   Spanish888. Com Official Winnings Notifications
• [U-Boot] Kconfig menu layout (multiple ways to show the same Kconfig configs?)   Kumar Gala
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   Ira Snyder
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   David Hawkins
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   Peter Tyser
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   David Hawkins
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   Ira Snyder
• [U-Boot] [PATCH v2 3/6] mpc83xx: USB: Reorganized its support   Remy Bohmer
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   Kim Phillips
• [U-Boot] MPC8313ERDB board reset problem   Kim Phillips
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   David Hawkins
• [U-Boot] USB gadget interface from cdc branch into mainline   Remy Bohmer
• [U-Boot] [PATCH] Enable display CPU-Info for at91sam9261   Remy Bohmer
• [U-Boot] JFFS2 + cache coherency   Renaud barbier
• [U-Boot] TSEC ethernet controller problems (crc errors / corruption)   Ira Snyder
• [U-Boot] [PATCH] update nand.h to support address more than 0x80000000   Scott Wood
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Liu Dave-R63238
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Liu Dave-R63238
• [U-Boot] [PATCH 1/8] Add simple hwconfig infrastructure   Andy Fleming
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Ira Snyder
• [U-Boot] [PATCH] 85xx: Fix the clock adjust of mpc8569mds board   Andy Fleming
• [U-Boot] [PATCH] 85xx: Add P2020DS support   Andy Fleming
• [U-Boot] PATCH: bugfix for reading maximum TLB size on mpc85xx   Andy Fleming
• [U-Boot] [PATCH] 85xx: Fix the wrong BCSR address of 8569MDS   Andy Fleming
• [U-Boot] [PATCH] 85xx: Fix the wrong SYS_CLK_IN for 8569MDS   Andy Fleming
• [U-Boot] TSEC ethernet controller problems (crc errors/corruption)   Liu Dave-R63238
• [U-Boot] [PATCH 1/8] Add simple hwconfig infrastructure   Anton Vorontsov
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Ira Snyder
• [U-Boot] [PATCH] mmc: Remove return from mmc_init for non SD 2.0 compatible cards.   Andy Fleming
• [U-Boot] [PATCH] mmc: Fix decoding of SCR & function switch data on little-endian machines   Andy Fleming
• [U-Boot] TSEC ethernet controller problems (crc errors/corruption)   Liu Dave-R63238
• [U-Boot] [PATCH] mmc: fix SD card SCR register decoding on little endian systems   Andy Fleming
• [U-Boot] TSEC ethernet controller problems (crc errors/corruption)   Liu Dave-R63238
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Kim Phillips
• [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci: Adding new Header file   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [Patch] bss section initialization on s3c44b0   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] ZOOM2 detect the version of the zoom2   Tom Rix
• [U-Boot] [PATCH 1/3] Fix a typo in the instructions on using omap3's gpio interface.   Tom Rix
• [U-Boot] [PATCH 2/3] ZOOM2 detect the version of the zoom2 board at runtime.   Tom Rix
• [U-Boot] [PATCH 3/3] Beagle Convert the board version detection to use the OMAP3 GPIO interface.   Tom Rix
• [U-Boot] [PATCH] update nand.h to support address more than 0x80000000   adrian wen
• [U-Boot] [PATCH 2/3] ZOOM2 detect the version of the zoom2 board at runtime.   Tom
• [U-Boot] pci bus scan in u-boot-1.0.2   null
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] iMX27 PDK board support   Brice.Walzer at ulp.u-strasbg.fr
• [U-Boot] MPC8313ERDB board reset problem   Deepak Gopalakrishnan
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   Wolfgang Denk
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] USB gadget interface from cdc branch into mainline   Raghu
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   Wolfgang Denk
• [U-Boot] Please pull u-boot-coldfire next   Liew Tsi Chung-R5AAHP
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Ira Snyder
• [U-Boot] UBI on NAND flash again   Daniel Mack
• [U-Boot] [PATCH 1/3] Fix a typo in the instructions on using omap3's gpio interface.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] Fix a typo in the instructions on using omap3's gpio interface.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] Beagle Convert the board version detection to use the OMAP3 GPIO interface.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] OMAP3 Turn on the GPIO bank clocks   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] ZOOM2 Define GPIO banks used.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] Fix a typo in the instructions on using omap3's gpio interface.   Tom
• [U-Boot] [PATCH 2/3 V3] ZOOM2 detect the version of the zoom2 board at runtime.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3 V3] ZOOM2 detect the version of the zoom2 board at runtime.   Tom
• [U-Boot] ARM next Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Scott Wood
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Kim Phillips
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-coldfire next   Wolfgang Denk
• [U-Boot] ARM next Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM next Pull Request   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Ira Snyder
• [U-Boot] [PATCH] ARM DaVinci: EMIF settings   David Brownell
• [U-Boot] ARM next Pull Request   Wolfgang Denk
• [U-Boot] [PATCH V2] make MODEM SUPPORT generic instead of duplicate it   Wolfgang Denk
• [U-Boot] [patch] Convert DM9000 driver for CONFIG_NET_MULTI   Wolfgang Denk
• [U-Boot] [Bug] IXP425 and e1000 network driver   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Paul Gortmaker
• [U-Boot] [PATCH] cfi_mtd: Fix bug in last sector detection   Wolfgang Denk
• [U-Boot] [PATCH] mtd: Add MTD concat support to concatenate multiple MTD NOR devices   Wolfgang Denk
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/corruption)   Liu Dave-R63238
• [U-Boot] [PATCH v2] mtd: Add MTD concat support to concatenate multiple MTD NOR devices   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/corruption)   David Hawkins
• [U-Boot] [PATCH] mtd: MTD related config header changes (mtdparts command)   Wolfgang Denk
• [U-Boot] [PATCH] mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o   Wolfgang Denk
• [U-Boot] [PATCH v2] cmd_mtdparts: Move to common handling of FLASH devices via MTD layer   Wolfgang Denk
• [U-Boot] [PATCH] 74xx_7xx: Add CPCI adapter/target support for the CPCI750   Wolfgang Denk
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Wolfgang Denk
• [U-Boot] [PATCH] Redundant Environment: protect full sector size   Wolfgang Denk
• [U-Boot] [PATCH] cmd_mtdparts.c: allow to omit definitions for default settings   Wolfgang Denk
• [U-Boot] [PATCH] EP88x: fix broken linker script   Wolfgang Denk
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Andy Fleming
• [U-Boot] [PATCH 2/2] Create the S5PC100 SoC header under the include/asm-arm/arch-s5pc100   Kim, Heung Jun
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Shinya Kuribayashi
• [U-Boot] UBI on NAND flash again   Stefan Roese
• [U-Boot] UBI on NAND flash again   Daniel Mack
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Stefan Roese
• [U-Boot] UBI on NAND flash again   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] iMX27 PDK board support   Brice.Walzer at ulp.u-strasbg.fr
• [U-Boot] [PATCH] A VLAN tagged DHCP request/discover is 4 bytes short   Norbert van Bolhuis
• [U-Boot] UBI on NAND flash again   Daniel Mack
• [U-Boot] [PATCH v2] 74xx_7xx: Add CPCI adapter/target support for the CPCI750   Stefan Roese
• [U-Boot] UBI on NAND flash again   Stefan Roese
• [U-Boot] UBI on NAND flash again   Wolfgang Denk
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Wolfgang Denk
• [U-Boot] [PATCH v2] 74xx_7xx: Add CPCI adapter/target support for the CPCI750   Wolfgang Denk
• [U-Boot] UBI on NAND flash again   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Wolfgang Denk
• [U-Boot] Please pull u-boot-mmc.git   Wolfgang Denk
• [U-Boot] UBI on NAND flash again   Daniel Mack
• [U-Boot] UBI on NAND flash again   Stefan Roese
• [U-Boot] [PATCH] arm: generic cache.h for ARM architectures   Prafulla Wadaskar
• [U-Boot] Bug in at32ap portmux.c   Mark Jackson
• [U-Boot] UBI on NAND flash again   Wolfgang Denk
• [U-Boot] UBI on NAND flash again   Daniel Mack
• [U-Boot] [PATCH 1/6] sh7785lcr: fix out of tree build   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/6 V2] sh: make the linker scripts more generic   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6 V2] sh: unify linker script   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/6] sh: introduce clock framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/6] sh3/sh4: fix CONFIG_SYS_HZ to 1000   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/6] sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: add unaligned macros   Daniel Mack
• [U-Boot] (no subject)   Daniel Mack
• [U-Boot] [PATCH 1/3] ARM: remove unused bit operations   Daniel Mack
• [U-Boot] [PATCH 2/3] Add generic bit operations   Daniel Mack
• [U-Boot] [PATCH 3/3] ARM: add unaligned macros   Daniel Mack
• [U-Boot] [PATCH 1/5] 74xx_7xx: CPCI750: Add commandline editing/history   Stefan Roese
• [U-Boot] [PATCH 2/5] 74xx_7xx: CPCI750: Add loadpci command   Stefan Roese
• [U-Boot] [PATCH 3/5] 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.c   Stefan Roese
• [U-Boot] [PATCH 4/5] 74xx_7xx: CPCI750: Enable access to PCI function > 0   Stefan Roese
• [U-Boot] [PATCH 5/5] 74xx_7xx: CPCI750: Add CPCI adapter/target support   Stefan Roese
• [U-Boot] Best way to submit this patch   Mark Jackson
• [U-Boot] [PATCH 2/3] Add generic bit operations   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Add generic bit operations   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Add generic bit operations   Daniel Mack
• [U-Boot] [PATCH 2/3] Add generic bit operations   Daniel Mack
• [U-Boot] [PATCH 2/3] Add generic bit operations   Wolfgang Denk
• [U-Boot] Best way to submit this patch   Jerry Van Baren
• [U-Boot] Rearding BDI2000 ld and go   Prabhu Chawandi
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   Stefan Roese
• [U-Boot] Compilation error when adding 4GB support in NAND driver   Paulraj, Sandeep
• [U-Boot] DRAM SPD version 1.3 support   Scott Coulter
• [U-Boot] Best way to submit this patch   Mark Jackson
• [U-Boot] Best way to submit this patch   Jerry Van Baren
• [U-Boot] [PATCH] Add AVR32 LCD support   Mark Jackson
• [U-Boot] iMX27 PDK board support   Brice.Walzer at ulp.u-strasbg.fr
• [U-Boot] [PATCH 7/7] nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devices   Stefan Roese
• [U-Boot] iMX27 PDK board support   Magnus Lilja
• [U-Boot] [PATCH] UBI: Add compile-time check for correct malloc area configuration   Stefan Roese
• [U-Boot] [mcf532x] dependency of start.S not correct   Wolfgang Wegner
• [U-Boot] Reply:Re: hi,guys,about the nand flash driver   Scott Wood
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   John Rigby
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   Scott Wood
• [U-Boot] MMU init code in uboot for MX31 PDK   alfred steele
• [U-Boot] MMU init code in uboot for MX31 PDK   alfred steele
• [U-Boot] Compilation error when adding 4GB support in NAND driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] MMU init code in uboot for MX31 PDK   Magnus Lilja
• [U-Boot] [PATCH 2/5] 74xx_7xx: CPCI750: Add loadpci command   Matthias Fuchs
• [U-Boot] [PATCH 3/3] ARM: add unaligned macros   Daniel Mack
• [U-Boot] [PATCH 4/5] 74xx_7xx: CPCI750: Enable access to PCI function > 0   Matthias Fuchs
• [U-Boot] [PATCH] ubifs: fix small error path mismatch   Daniel Mack
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] Compilation error when adding 4GB support in NAND driver   Paulraj, Sandeep
• [U-Boot] MMU init code in uboot for MX31 PDK   alfred steele
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] MMU init code in uboot for MX31 PDK   Magnus Lilja
• [U-Boot] [PATCH 2/3] Add generic bit operations   Daniel Mack
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Stefan Roese
• [U-Boot] MMU init code in uboot for MX31 PDK   Paul Thomas
• [U-Boot] [PATCH 2/3] Add generic bit operations   Stefan Roese
• [U-Boot] Compilation error when adding 4GB support in NAND driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] [PATCH 3/3] ARM: add unaligned macros   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Add generic bit operations   Wolfgang Denk
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] ARM: add unaligned macros   Daniel Mack
• [U-Boot] [PATCH 03/14 v2] MPC85xx: Fix some settings for MPC8569MDS board   Haiying Wang
• [U-Boot] [PATCH 10/14 v4] Update the number of ethxaddr in reading system eeprom   Haiying Wang
• [U-Boot] [PATCH 11/14 v2] Pass in uec_info struct through uec_initialize   Haiying Wang
• [U-Boot] [PATCH 12/14 v2] drivers/qe: add sgmii support in for UEC driver   Haiying Wang
• [U-Boot] [PATCH] OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] Add support for Linux-like kallsysms   Wolfgang Denk
• [U-Boot] [PATCH 1/1] FAT replace compare_sign with strncmp.   Wolfgang Denk
• [U-Boot] [PATCH] config.mk: remove un-needed REMOTE_BUILD check   Wolfgang Denk
• [U-Boot] [PATCH] nvedit: speed up printing of environment   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Make "usage" messages more helpful.   Wolfgang Denk
• [U-Boot] [PATCH] compiler.h: unify system ifdef cruft here   Mike Frysinger
• [U-Boot] [PATCH] NAND boot: fix nand_load overlap issue   Mingkai Hu
• [U-Boot] [PATCH 3/3] ARM: add unaligned macros   Stefan Roese
• [U-Boot] [PATCH 2/5] 74xx_7xx: CPCI750: Add loadpci command   Stefan Roese
• [U-Boot] [PATCH v2] 74xx_7xx: CPCI750: Enable access to PCI function > 0   Stefan Roese
• [U-Boot] Ethernet driver( SMC911x) not working with omap3evm   shariff Shardar
• [U-Boot] yaffs2 rfs burning in u-boot   virupax
• [U-Boot] [PATCH 2/2] General help message cleanup   Wolfgang Denk
• [U-Boot] [PATCH] kgdb: unify kgdb on serial   Wolfgang Denk
• [U-Boot] [PATCH 1/3] smc911x: write back the manually set MAC address   Wolfgang Denk
• [U-Boot] Contact Mr. Cooper Butler With Your REF NO: UKL/74-A0802742009.   CAMELOT GROUP PLC.
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Wolfgang Denk
• [U-Boot] Support in u-boot for PCI-Express NIC   Wolfgang Denk
• [U-Boot] [PATCH 2/5] 74xx_7xx: CPCI750: Add loadpci command   Matthias Fuchs
• [U-Boot] [PATCH V4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v2 10/10] MPC512x: add support for ARIA board   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mpc512x: Fix PSC divisor calculation for baudrate setting   Wolfgang Denk
• [U-Boot] [PATCH 2/2] mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code   Wolfgang Denk
• [U-Boot] PULL into "next": u-boot-mpc5xxx.git#next   Wolfgang Denk
• [U-Boot] PULL into "next": u-boot-mpc5xxx.git#next   Wolfgang Denk
• [U-Boot] [PATCH] mmc: fix SD card SCR register decoding on little endian systems   Rabin Vincent
• [U-Boot] at91: fix a USB problem for AT91SAM9261   RONETIX - Ilko Iliev
• [U-Boot] Ethernet driver( SMC911x) not working with omap3evm   Dirk Behme
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Ben Warren
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Paul Gortmaker
• [U-Boot] [PATCH ARM Clean-up of ARM920T S3C24x0 code   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] Adding a composite device, how to structure ?   Tom
• [U-Boot] U-Boot][PATCH] ARM Clean-up of ARM920T S3C24x0 drivers code   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] Adding a composite device, how to structure ?   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Add generic bit operations   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] start.S compile error for qemu-mips   Utpal Parrikar
• [U-Boot] [PATCH] MCF5271: Added #defines for Edge Port Module (EPORT)   Richard Retanubun
• [U-Boot] start.S compile error for qemu-mips   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Kim Phillips
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Kim Phillips
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   dwh at ovro.caltech.edu
• [U-Boot] Adding a composite device, how to structure ?   Heiko Schocher
• [PATCH] OMAP3 I2C Fix the sampling clock.   Tom Rix
• [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Tom Rix
• [U-Boot] console_init_r problem with ingenic jz4740 cpu   xiangfu
• [U-Boot] Euros Milliones Notification   Euros Milliones Board
• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Robert Schwebel
• [U-Boot] iMX27 PDK board support   Robert Schwebel
• [U-Boot] Ethernet not working on OMAP3 board with   John Rigby
• [U-Boot] [PATCH 1/1] versatile: config coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] usb: fix wait_ms declaration   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm: generic cache.h for ARM architectures   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v1] arm: Kirkwood: Basic SOCs support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci: EMIF settings   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] move L2 cache enable/disable function to cache.c in the omap3 SoC directory   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] move L2 cache enable/disable function to cache.c in the omap3 SoC directory   Dirk Behme
• [U-Boot] apollon: Fix a OBJCFLAGS typo   Shinya Kuribayashi
• [U-Boot] CUSTODIANS: Final boarding call for flight 2009-06   Wolfgang Denk
• [U-Boot] ***Winning Notification £1,500,000,000.00 GBP***   National Liverwood Lottery Inc.
• [U-Boot] [PATCH 2/3] Add generic bit operations   Daniel Mack
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ilya Yanok
• [U-Boot] You just won $1,000,000   ©FREE LOTTO
• [U-Boot] [PATCH 0/7][v3] Support for LogicPD i.MX27-LITEKIT development board   Ilya Yanok
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Ilya Yanok
• [U-Boot] [PATCH 2/7] serial_mx31: allow it to work with mx27 too and rename to serial_mxc   Ilya Yanok
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ilya Yanok
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Ilya Yanok
• [U-Boot] [PATCH 5/7] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   Ilya Yanok
• [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC   Ilya Yanok
• [U-Boot] [PATCH 7/7] imx27lite: add support for imx27lite board from LogicPD   Ilya Yanok
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Fabio Estevam
• [U-Boot] Appropiate place for custom board init   alfred steele
• [U-Boot] Support in u-boot for PCI-Express NIC   Zang Roy-R61911
• [U-Boot] [PATCH v1] arm: Kirkwood: Basic SOCs support   Prafulla Wadaskar
• [U-Boot] CUSTODIANS: Final boarding call for flight 2009-06   Prafulla Wadaskar
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Prafulla Wadaskar
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] ARM mach-types.h sync request   Daniel Gorsulowski
• [U-Boot] Appropiate place for custom board init   Wolfgang Denk
• [U-Boot] CUSTODIANS: Final boarding call for flight 2009-06   Mike Frysinger
• [U-Boot] CUSTODIANS: Final boarding call for flight 2009-06   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] mpc512x: Add esd gmbh mecp5123 board support   Stefan Roese
• [U-Boot] [PATCH] NAND boot: change NAND loader's relocate SP to CONFIG param   Mingkai Hu
• [U-Boot] [next] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
• [U-Boot] MPC8313ERDB u-boot upgrade usb problem   Deepak Gopalakrishnan
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Heiko Schocher
• [U-Boot] [PATCH] mpc512x: Add esd gmbh mecp5123 board support   Wolfgang Denk
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Wolfgang Denk
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Piotr Zięcik
• [U-Boot] [PATCH V4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH] OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change   Matthias Ludwig
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Grazvydas Ignotas
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH v3 2/3] net: Add Marvell Kirkwood gigabit ethernet driver   Prafulla Wadaskar
• [U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ilya Yanok
• [U-Boot] |>entists Contact List in the USA   gigacycle Ayala
• [U-Boot] Pull request - net   Liew Tsi Chung-R5AAHP
• [U-Boot] [mcf532x] dependency of start.S not correct   TC Liew
• [U-Boot] [mcf532x] dependency of start.S not correct   Wolfgang Wegner
• [U-Boot] [PATCH] MCF5271: Added #defines for Edge Port Module (EPORT)   TC Liew
• [U-Boot] mkimage for ppc   Hollis Blanchard
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Kim Phillips
• [U-Boot] mkimage for ppc   Avi Kivity
• [U-Boot] [PATCH 2/3] digsy MTC: Add SPI support.   Detlev Zundel
• [U-Boot] [PATCH 1/3] mpc52xx: Add SPI driver.   Detlev Zundel
• [U-Boot] [PATCH 3/3] digsy MTC: Add 'mtc' command.   Detlev Zundel
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Stefan Roese
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   David Hawkins
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] mkimage for ppc   Josh Boyer
• [U-Boot] [PATCH] mpc512x: Add esd gmbh mecp5123 board support   Stefan Roese
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Wolfgang Denk
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: Add esd gmbh mecp5123 board support   Wolfgang Denk
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   John Rigby
• [U-Boot] [PATCH 1/1] usb: fix wait_ms declaration   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb (next)   Remy Bohmer
• [U-Boot] patch to make u-boot work on jornada 720 flashrom - feedback wanted   Kristoffer Ericson
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Wolfgang Denk
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Fabio Estevam
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] [next] Pull request u-boot-blackfin.git (sf branch)   Wolfgang Denk
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] Pull request: u-boot-usb (next)   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Liu Dave-R63238
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   David Hawkins
• [U-Boot] MPC8313ERDB u-boot upgrade usb problem   Kim Phillips
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH] mpc512x: Add esd gmbh mecp5123 board support   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Wolfgang Denk
• [U-Boot] [PATCH] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] mcp512x: Add macros for SCFR LPC divisor access   Stefan Roese
• [U-Boot] [PATCH v2] mpc512x: Add esd gmbh mecp5123 board support   Stefan Roese
• [U-Boot] [PATCH v2] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] MPC8313ERDB u-boot upgrade usb problem   Deepak Gopalakrishnan
• [U-Boot] there is no need for uboot to use linux's mtd driver!   liu.yaojin at zte.com.cn
• [U-Boot] [PATCH 17/30] lan91c96/smc91111/smc911x: get mac address from environment   Wolfgang Denk
• [U-Boot] [PATCH v2 1/3] mpc52xx: Add SPI driver.   Grzegorz Bernacki
• [U-Boot] [PATCH v2 2/3] digsy MTC: Add SPI support.   Grzegorz Bernacki
• [U-Boot] [PATCH v2 3/3] digsy MTC: Add 'mtc' command.   Grzegorz Bernacki
• [U-Boot] ext3 inode_size   Weirich, Bernhard
• [U-Boot] ext3 inode_size   Wolfgang Denk
• [U-Boot] [PATCH v3] nand/mpc512x: Add MPC512x NAND support (NFC)   Stefan Roese
• [U-Boot] [PATCH] mpc512x: MPC5121ADS: Add NAND support   Stefan Roese
• [U-Boot] [PATCH] fix ext2 inode size and calculations   Weirich, Bernhard
• [U-Boot] [patch/rfc] rm9200 lowevel_init: don't touch reserved/readonly registers   David Brownell
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   David Brownell
• [U-Boot] [PATCH] fix ext2 inode size and calculations   Wolfgang Denk
• [U-Boot] [RFC/PATCH v2] allow boards to customize compiler options on a per-file/dir basis   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 0/6] MX31: NAND boot for PDK boards.   Magnus Lilja
• [U-Boot] [PATCH v3 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Magnus Lilja
• [U-Boot] [PATCH v3 2/6] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v3 3/6] ARM: Add macros.h to be used in assembler file.   Magnus Lilja
• [U-Boot] [PATCH v3 4/6] i.MX31: Create a common device file.   Magnus Lilja
• [U-Boot] [PATCH v3 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v3 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v3 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Wolfgang Denk
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Remy Bohmer
• [U-Boot] [PATCH v3 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Magnus Lilja
• [U-Boot] [PATCH] s3c64xx: support the soft reset at s3c6410   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 3/6] ARM: Add macros.h to be used in assembler file.   Wolfgang Denk
• [U-Boot] [PATCH v3 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Wolfgang Denk
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Anton Vorontsov
• [U-Boot] [PATCH 1/8] Add simple hwconfig infrastructure   Anton Vorontsov
• [U-Boot] [PATCH 2/8] fsl_esdhc: Add device tree fixups   Anton Vorontsov
• [U-Boot] [PATCH 3/8] mpc83xx: MPC837XERDB: Add support for FSL eSDHC   Anton Vorontsov
• [U-Boot] [PATCH 4/8] mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device tree   Anton Vorontsov
• [U-Boot] [PATCH 5/8] fdt_support, usb: Move fdt_fixup_dr_usb routine to drivers/usb/otg   Anton Vorontsov
• [U-Boot] [PATCH 6/8] fsl_dr_usb: Fixup disabled USB controllers nodes in device tree   Anton Vorontsov
• [U-Boot] [PATCH 7/8] mpc83xx: MPC8315ERDB: Use hwconfig for board type selection   Anton Vorontsov
• [U-Boot] [PATCH v3 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Magnus Lilja
• [U-Boot] [PATCH 8/8] mpc83xx: MPC837xEMDS: Use hwconfig instead of pci_external_arbiter variable   Anton Vorontsov
• [U-Boot] [PATCH v3 2/6] MX31: Add NAND SPL for i.MX31.   Wolfgang Denk
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] [PATCH v3 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Wolfgang Denk
• [U-Boot] [PATCH v3 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Some patches for MPC8569E-MDS   Anton Vorontsov
• [U-Boot] [PATCH 1/5] mpc85xx: Add multi-serial support for MPC8569E-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH 2/5] fdt_support: Add multi-serial support for stdout fixup   Anton Vorontsov
• [U-Boot] [PATCH 3/5] mpc85xx: Add eSDHC support for MPC8569E-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH 4/5] mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards   Anton Vorontsov
• [U-Boot] [PATCH 5/5] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards   Anton Vorontsov
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] TQM85xx: adapt for new flash types   Wolfgang Denk
• [U-Boot] [PATCH] TQM85xx: minor config file cleanup   Wolfgang Denk
• [U-Boot] [PATCH] ubifs: fix small error path mismatch   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   David Hawkins
• [U-Boot] [PATCH 1/1] SMC911x driver fixed for NFS boot   Wolfgang Denk
• [U-Boot] [PATCH] rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared   Wolfgang Denk
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   Liu Dave-R63238
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] TSEC ethernet controller problems (crc errors/ corruption)   David Hawkins
• [U-Boot] [PATCH 17/30] lan91c96/smc91111/smc911x: get mac address from environment   Mike Frysinger
• [U-Boot] Please pull ubi/next   Stefan Roese
• [U-Boot] Please pull ubi/next (2nd try)   Stefan Roese
• [U-Boot] question on relocation of arm920t   J.Hwan.Kim
• [U-Boot] question on relocation of arm920t   tike64 at gmail.com
• [U-Boot] [STATUS] v2009.06-rc3 is out   Wolfgang Denk
• [U-Boot] Pull request - net   Prafulla Wadaskar
• [U-Boot] DM9000 : MAC Address mismatch with Linux kernel   stefano babic
• [U-Boot] lcd logo color not correct   xiangfu
• [U-Boot] DM9000 : MAC Address mismatch with Linux kernel   Wolfgang Denk
• [U-Boot] Boot from USB support for Kirkwood SOC   Prafulla Wadaskar
• [U-Boot] [PATCH v2 1/3] mpc52xx: Add SPI driver.   Detlev Zundel
• [U-Boot] [PATCH v2 2/3] digsy MTC: Add SPI support.   Detlev Zundel
• [U-Boot] [PATCH 1/2 u-boot-next] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2 u-boot-next] ARM: Don't include libgcc anymore   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] fix ext2 inode size and calculations   Weirich, Bernhard
• [U-Boot] [PATCH v3 3/6] ARM: Add macros.h to be used in assemblerfile.   Peter Pearse
• [U-Boot] [PATCH v2 1/3] mpc52xx: Add SPI driver.   Grzegorz Bernacki
• [U-Boot] Zoom hw reset   Tom Rix
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Tom Rix
• [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030   Tom Rix
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Tom Rix
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Tom Rix
• [U-Boot] [PATCH v2 1/3] mpc52xx: Add SPI driver.   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] digsy MTC: Add SPI support.   Grzegorz Bernacki
• [U-Boot] USB multiple usb_foo_descriptor definitions?   Tom
• [U-Boot] [PATCH v5] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v5] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v3 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Fabio Estevam
• [U-Boot] lcd logo color not correct   xiangfu
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Peter Tyser
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Menon, Nishanth
• [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030   Menon, Nishanth
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Menon, Nishanth
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Dirk Behme
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Menon, Nishanth
• [U-Boot] [PATCH v3 2/6] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v3 3/6] ARM: Add macros.h to be used in assembler file.   Magnus Lilja
• [U-Boot] [PATCH v3 3/6] ARM: Add macros.h to be used in assemblerfile.   Magnus Lilja
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Peter Tyser
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH] Add support for the Tundra TSI148 VME-bridge   Stefan Roese
• [U-Boot] [PATCH] mpc83xx: Add esd VME8349 board support   Stefan Roese
• [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Heiko Schocher
• [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Heiko Schocher
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Menon, Nishanth
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Menon, Nishanth
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Wolfgang Denk
• [U-Boot] [PATCH] DaVinci Network Driver Updates   Paulraj, Sandeep
• [U-Boot] AVIC initialization in Uboot for mx31 pdk   alfred steele
• [U-Boot] AVIC initialization in Uboot for mx31 pdk   Wolfgang Denk
• [U-Boot] MMC issues with cards formatted as SuperFloppy format?   Robin Getz
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] Please pull ubi/next (2nd try)   Wolfgang Denk
• [U-Boot] Building U-Boot under Ubuntu 8.10   cmfairfa at rockwellcollins.com
• [U-Boot] Building U-Boot under Ubuntu 8.10   Kumar Gala
• [U-Boot] Building U-Boot under Ubuntu 8.10   cmfairfa at rockwellcollins.com
• [U-Boot] apollon: Fix a OBJCFLAGS typo   Kyungmin Park
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Menon, Nishanth
• [U-Boot] Building U-Boot under Ubuntu 8.10   Kumar Gala
• [U-Boot] ARM Pull Request   Prafulla Wadaskar
• [U-Boot] Boot from USB support for Kirkwood SOC   xiangfu
• [U-Boot] [PATCH/next] Blackfin: bfin_mac: do portmuxing earlier to allow board override   Mike Frysinger
• [U-Boot] Boot from USB support for Kirkwood SOC   Prafulla Wadaskar
• [U-Boot] Boot from USB support for Kirkwood SOC   xiangfu
• [U-Boot] Building U-Boot under Ubuntu 8.10   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] Boot from USB support for Kirkwood SOC   Wolfgang Denk
• [U-Boot] Boot from USB support for Kirkwood SOC   xiangfu
• [U-Boot] ARM Pull Request   Prafulla Wadaskar
• [U-Boot] ARM Pull Request   Magnus Lilja
• [U-Boot] NAND FDT mapping on Canyonlands   Felix Radensky
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] Building U-Boot under Ubuntu 8.10   cmfairfa at rockwellcollins.com
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Kim Phillips
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Anton Vorontsov
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] Building U-Boot under Ubuntu 8.10   Wolfgang Denk
• [U-Boot] [PATCH] mpc83xx: Add esd VME8349 board support   Kim Phillips
• [U-Boot] Building U-Boot under Ubuntu 8.10   Kenneth Johansson
• [U-Boot] Flash Errors in Building u-boot.2009.03 for mx31ads   Yong Yang
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Kim Phillips
• [U-Boot] Building U-Boot under Ubuntu 8.10   Wolfgang Denk
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Wolfgang Denk
• [U-Boot] Building U-Boot under Ubuntu 8.10   Kenneth Johansson
• [U-Boot] [PATCH/next] Blackfin: bfin_mac: do portmuxing earlier to allow board override   Ben Warren
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Kim Phillips
• [U-Boot] Building U-Boot under Ubuntu 8.10   Wolfgang Denk
• [U-Boot] Building U-Boot under Ubuntu 8.10   Ben Warren
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Anton Vorontsov
• [U-Boot] Building U-Boot under Ubuntu 8.10   Wolfgang Denk
• [U-Boot] Building U-Boot under Ubuntu 8.10   Ben Warren
• [U-Boot] [PATCH 2/2 v4] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] [PATCH 1/1] OMAP3 I2C Fix the sampling clock.   Tom Rix
• [U-Boot] [PATCH 1/1] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] there is no need for uboot to use linux's mtd driver!   Wolfgang Denk
• [U-Boot] V3 OMAP3 I2C Fix the sampling clock   Tom Rix
• [U-Boot] [PATCH 1/1] OMAP3 I2C Fix the sampling clock.   Tom Rix
• [U-Boot] Please pull u-boot-mpc83xx - master branch   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx - next branch   Kim Phillips
• [U-Boot] [PATCH v3 0/8] hwconfig and some its users   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx - master branch   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx - next branch   Wolfgang Denk
• [U-Boot] Reprogramming Flash on GDATech 8540 EVAL board   Nikhil Gupta
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Paul Thomas
• [U-Boot] De'ntists Listing in the US   Newton R Sonia
• [U-Boot] 34704 PMIC   Paul Thomas
• [U-Boot] [PATCH 02/15] MPC85xx: Fix MURAM size for MPC8569   Kumar Gala
• [U-Boot] [PATCH 03/14 v2] MPC85xx: Fix some settings for MPC8569MDS board   Kumar Gala
• [U-Boot] [PATCH 04/15] MPC85xx: Add PIB support at CS4/CS5 for MPC8569MDS   Kumar Gala
• [U-Boot] [PATCH 05/15] MPC85xx: Add UART1 support for MPC8569MDS   Kumar Gala
• [U-Boot] [PATCH 1/2] 85xx: Use print_size to report amount of memory not mapped by TLBs   Kumar Gala
• [U-Boot] [PATCH 2/2] fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT   Kumar Gala
• [U-Boot] USB EHCI on MPC8349 based board very slow   Dushara Jayasinghe
• [U-Boot] where is the ethernet of S3C2410 initialized?   J.Hwan.Kim
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH v3 1/4] mpc52xx: Add SPI driver.   Grzegorz Bernacki
• [U-Boot] [PATCH v3 2/4] digsy MTC: Add SPI support.   Grzegorz Bernacki
• [U-Boot] [PATCH v3 3/4] digsy MTC: Add 'mtc' command.   Grzegorz Bernacki
• [U-Boot] [PATCH v3 4/4] digsy mtc: Add description to GPIO initial configuration.   Grzegorz Bernacki
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH 1/5] 74xx_7xx: CPCI750: Add commandline editing/history   Wolfgang Denk
• [U-Boot] [PATCH 2/5] 74xx_7xx: CPCI750: Add loadpci command   Wolfgang Denk
• [U-Boot] [PATCH 3/5] 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.c   Wolfgang Denk
• [U-Boot] [PATCH v2] 74xx_7xx: CPCI750: Enable access to PCI function > 0   Wolfgang Denk
• [U-Boot] [PATCH 5/5] 74xx_7xx: CPCI750: Add CPCI adapter/target support   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: Fix problem with I2C access before relocation   Wolfgang Denk
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Tom
• [U-Boot] [PATCH] mcp512x: Add macros for SCFR LPC divisor access   Wolfgang Denk
• [U-Boot] [PATCH v2] mpc512x: Add esd gmbh mecp5123 board support   Wolfgang Denk
• [U-Boot] [PATCH v3] nand/mpc512x: Add MPC512x NAND support (NFC)   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: MPC5121ADS: Add NAND support   Wolfgang Denk
• [U-Boot] MPC5xxx Pull Request (for "next" branch)   Wolfgang Denk
• [U-Boot] MPC5xxx Pull Request (for "next" branch)   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Kumar Gala
• [U-Boot] [PATCH 03/11] 85xx, 86xx: Break out DMA code to a common file   Kumar Gala
• [U-Boot] [PATCH 09/11] fsl_dma: Move dma function prototypes to common header file   Kumar Gala
• [U-Boot] [PATCH 2/7] tsec: Add support for BCM5482S PHY   Kumar Gala
• [U-Boot] [PATCH 3/7] 86xx: Unlock l1 cache unconditionally   Kumar Gala
• [U-Boot] [PATCH 2/7] tsec: Add support for BCM5482S PHY   Ben Warren
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Wolfgang Denk
• [U-Boot] [STATUS] "next" branch rebased   Wolfgang Denk
• [U-Boot] [PATCH 1/4] MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF   Wolfgang Denk
• [U-Boot] [PATCH 2/4] immap_512x.h: Add MSCAN1...4 Clock Control Registers   Wolfgang Denk
• [U-Boot] [PATCH 3/4] mecp5123: fix build error   Wolfgang Denk
• [U-Boot] [PATCH 4/4] MPC512x: factor out common code   Wolfgang Denk
• [U-Boot] [PATCH 1/1] SMC911x driver fixed for NFS boot   Wolfgang Denk
• [U-Boot] [PATCH] DaVinci Network Driver Updates   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Tom
• [U-Boot] [patch] csb337 board support (ARM at91rm9200)   David Brownell
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   David Brownell
• [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] [PATCH 1/7] 85xx: Add PORBMSR and PORDEVSR shift defines   Kumar Gala
• [U-Boot] [PATCH 01/11] fsl: Create common fsl_dma.h for 85xx and 86xx cpus   Kumar Gala
• [U-Boot] [PATCH 02/11] 85xx, 86xx: Sync up DMA code   Kumar Gala
• [U-Boot] [PATCH 4/7] xes: Update Freescale PCI code to work with 86xx processors   Kumar Gala
• [U-Boot] [PATCH 5/7] xes: Update Freescale DDR code to work with 86xx processors   Kumar Gala
• [U-Boot] [PATCH 6/7] xes: Update Freescale clock code to work with 86xx processors   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx - next branch   Kumar Gala
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Ben Warren
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Menon, Nishanth
• [U-Boot] [PATCH] 85xx: Enable the DDR3 SPD support for P2020DS board   Dave Liu
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Tom
• [U-Boot] Boot ELF image using tftpboot   Wolfgang Denk
• [U-Boot] Boot ELF image using tftpboot   Vered Zvi
• [U-Boot] Add support for AT91 WDT   Giulio Benetti
• [U-Boot] Add support for AT91 WDT   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] avr32/hsdramc: Move conditional compilation to Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Add support for AT91 WDT   Giulio Benetti
• [U-Boot] [PATCH 1/2] at91sam9: add watchdog support   Giulio Benetti
• [U-Boot] [PATCH 1/5] pm9263: lowlevel init update   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/5] pm9263: use macro instead of hardcode value for the lowlevel_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/5] at91: add support for the PM9261 board of Ronetix GmbH   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/5] at91sam9263ek: add nor flash support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/5] at91: unify nor boot support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Giulio Benetti
• [U-Boot] [PATCH 1/1] malloc.h: protect it against multiple include   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   David Brownell
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] avr32/hsdramc: Move conditional compilation to Makefile   Haavard Skinnemoen
• [U-Boot] [PATCH 1/1] SMC911x driver fixed for NFS boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] smc911x: fix warning: large integer implicitly truncated to unsigned type   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] smc911x: move function implementation for header to c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Tom
• [U-Boot] [PATCH] Add AVR32 LCD support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] ZOOM1 Add power reset button   Nishanth Menon
• [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] where is the ethernet of S3C2410 initialized?   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] smc911x: move function implementation for header to c   Mike Frysinger
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Mike Frysinger
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk?(csb337)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [ANNOUNCE] ARM config scheme for board and machine update   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk?(csb337)   Mike Frysinger
• [U-Boot] [PATCH 1/1] at91: use Linux CONFIG scheme for board and arch   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   David Brownell
• [U-Boot] [PATCH v4 0/6] MX31: NAND boot for PDK boards.   Magnus Lilja
• [U-Boot] [PATCH v4 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Magnus Lilja
• [U-Boot] [PATCH v4 2/6] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v4 3/6] ARM: Add macros.h to be used in assembler file.   Magnus Lilja
• [U-Boot] [PATCH v4 4/6] i.MX31: Create a common device file.   Magnus Lilja
• [U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [ANNOUNCE] ARM config scheme for board and machine update   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: use Linux CONFIG scheme for board and arch   Wolfgang Denk
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC/PATCH 1/2] r2dplus: add menu example support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [ANNOUNCE] ARM config scheme for board and machine update   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] at91: use Linux CONFIG scheme for board and arch   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Paul Thomas
• [U-Boot] [RFC] Menu Frameworj   Wolfgang Denk
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Wolfgang Denk
• [U-Boot] [RFC/PATCH 1/2] r2dplus: add menu example support   Wolfgang Denk
• [U-Boot] [ANNOUNCE] ARM config scheme for board and machine update   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: use Linux CONFIG scheme for board and arch   Wolfgang Denk
• [U-Boot] subscription for mailing u-boot updates   durga prasad
• [U-Boot] [PATCH 00/17] Blackfin updates for post 2009.06   Mike Frysinger
• [U-Boot] [PATCH 01/17] Blackfin: add support for embedding the environment into LDRs   Mike Frysinger
• [U-Boot] [PATCH 02/17] Blackfin: new spibootldr command   Mike Frysinger
• [U-Boot] [PATCH 03/17] Blackfin: cm-bf533: new board port   Mike Frysinger
• [U-Boot] [PATCH 04/17] Blackfin: cm-bf537e: new board port   Mike Frysinger
• [U-Boot] [PATCH 05/17] Blackfin: cm-bf561: new board port   Mike Frysinger
• [U-Boot] [PATCH 06/17] Blackfin: tcm-bf537: new board port   Mike Frysinger
• [U-Boot] [PATCH 07/17] Blackfin: cm-bf548: new board port   Mike Frysinger
• [U-Boot] [PATCH 08/17] Blackfin: cm-bf527: new board port   Mike Frysinger
• [U-Boot] [PATCH 09/17] Blackfin: bf537-pnav: new board port   Mike Frysinger
• [U-Boot] [PATCH 10/17] Blackfin: bf537-minotaur: new board port   Mike Frysinger
• [U-Boot] [PATCH 11/17] Blackfin: bf537-srv1: new board port   Mike Frysinger
• [U-Boot] [PATCH 12/17] Blackfin: blackstamp: new board port   Mike Frysinger
• [U-Boot] [PATCH 13/17] Blackfin: ibf-dsp561: new board port   Mike Frysinger
• [U-Boot] [PATCH 14/17] Blackfin: make default ADI env more flexible   Mike Frysinger
• [U-Boot] [PATCH 15/17] Blackfin: enable LZMA for all ADI boards   Mike Frysinger
• [U-Boot] [PATCH 16/17] Blackfin: convert specific pre/post config headers to common method   Mike Frysinger
• [U-Boot] [PATCH 17/17] Blackfin: bf518f-ezbrd: enable SST SPI flash driver   Mike Frysinger
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] at91: use Linux CONFIG scheme for board and arch   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] Menu Frameworj   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: use Linux CONFIG scheme for board and arch   Wolfgang Denk
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] Menu Frameworj   Mike Frysinger
• [U-Boot] [RFC] Menu Frameworj   Wolfgang Denk
• [U-Boot] [RFC] Menu Frameworj   Wolfgang Denk
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] Menu Frameworj   Wolfgang Denk
• [U-Boot] [RFC] Menu Frameworj   Wolfgang Denk
• [U-Boot] [PATCH 01/17] Blackfin: add support for embedding the environment into LDRs   Wolfgang Denk
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Blackfin: unify u-boot linker scripts   Mike Frysinger
• [U-Boot] [RFC] Menu Frameworj   Mike Frysinger
• [U-Boot] [PATCH 01/17] Blackfin: add support for embedding the environment into LDRs   Mike Frysinger
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] Menu Frameworj   Mike Frysinger
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Mike Frysinger
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Wolfgang Denk
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Mike Frysinger
• [U-Boot] [PATCH/next] add %.c->%.i and %.c->%.s rules   Mike Frysinger
• [U-Boot] [RFC] Menu Frameworj   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/next] add %.c->%.i and %.c->%.s rules   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Mike Frysinger
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH v4 2/3] net: Add Marvell Kirkwood gigabit ethernet driver   Prafulla Wadaskar
• [U-Boot] [PATCH v4 3/3][repost] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v3] nand/mpc512x: Add MPC512x NAND support (NFC)   Wolfgang Denk
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Wolfgang Denk
• [U-Boot] [PATCH 01/10 v2] MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF   Wolfgang Denk
• [U-Boot] [PATCH 02/10 v2] MPC512x: Add MSCAN1...4 Clock Control Registers   Wolfgang Denk
• [U-Boot] [PATCH 03/10 v2] mecp5123: fix build error   Wolfgang Denk
• [U-Boot] [PATCH 04/10 v2] MPC512x: factor out common code   Wolfgang Denk
• [U-Boot] [PATCH 05/10] aria: adjust memory controller initialization   Wolfgang Denk
• [U-Boot] [PATCH 06/10] mecp5123: cleanup - remove dead code   Wolfgang Denk
• [U-Boot] [PATCH 07/10] MPC512x: fix typo in comment listing the NAND driver name   Wolfgang Denk
• [U-Boot] [PATCH 08/10] aria: enable NAND flash support   Wolfgang Denk
• [U-Boot] [PATCH 09/10] aria: add JFFS2 and MTDPARTS support; adjust flash map   Wolfgang Denk
• [U-Boot] [PATCH 10/10] mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map   Wolfgang Denk
• [U-Boot] Out-of-tree build of API code fails   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx - next branch   Wolfgang Denk
• [U-Boot] [STATUS] U-Boot 2009.06 Release   Wolfgang Denk
• [U-Boot] TICKET NO:1110008342   ©FREE LOTTO
• [U-Boot] [PATCH 0/2] new video driver and board update   Wolfgang Denk
• [U-Boot] [PATCH/next v3] allow boards to customize compiler options on a per-file/dir basis   Wolfgang Denk
• [U-Boot] [PATCH v3 1/4] mpc52xx: Add SPI driver.   Wolfgang Denk
• [U-Boot] [PATCH v3 2/4] digsy MTC: Add SPI support.   Wolfgang Denk
• [U-Boot] [PATCH v3 3/4] digsy MTC: Add 'mtc' command.   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] digsy mtc: Add description to GPIO initial configuration.   Wolfgang Denk
• [U-Boot] [PATCH] make sure toplevel $(SUBDIRS) is always declared   Wolfgang Denk
• [U-Boot] [PATCH v5] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH v5] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH/next] add %.c->%.i and %.c->%.s rules   Wolfgang Denk
• [U-Boot] [PATCH v5] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v6] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH] envcrc: add missing dependencies on env storage   Mike Frysinger
• [U-Boot] [PATCH] cmd_mmc: make curr_device static   Mike Frysinger
• [U-Boot] [PATCH] sata: namespace curr_device variable   Mike Frysinger
• [U-Boot] MAKEALL, don't have other cross compile   xiangfu
• [U-Boot] ENV_IS_EMBEDDED vs CONFIG_ENV_IS_EMBEDDED   Mike Frysinger
• [U-Boot] [PATCH] push CROSS_COMPILE out to $(ARCH)_config.mk   Mike Frysinger
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Mike Frysinger
• [U-Boot] [PATCH v4 2/3] net: Add Marvell Kirkwood gigabit ethernet driver   Ben Warren
• [U-Boot] [PATCH] A VLAN tagged DHCP request/discover is 4 bytes short   Ben Warren
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH 0/2] new video driver and board update   Anatolij Gustschin
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ENV_IS_EMBEDDED vs CONFIG_ENV_IS_EMBEDDED   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH] Blackfin: add jtagconsole helper script   Wolfgang Denk
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] MAKEALL, don't have other cross compile   Wolfgang Denk
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Giulio Benetti
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] mcf5445x watchdog support in U-Boot   Matthew Lear
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Alessandro Rubini
• [U-Boot] [RFC/PATCH 1/2] r2dplus: add menu example support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Johan
• [U-Boot] Out-of-tree build of API code fails   Rafal Jaworowski
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Mike Frysinger
• [U-Boot] Flash Errors in Building u-boot.2009.03 for mx31ads   Yong Yang
• [U-Boot] [PATCH] usb: fix CONFIG_SYS_MPC83xx_USB_ADDR not defined error   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: set 64BIT_VSPRINTF for boards using nand_util   Kim Phillips
• [U-Boot] [PATCH] net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warning   Kim Phillips
• [U-Boot] [PATCH] common: fix 'dummy' is used uninitialized in this function warning   Kim Phillips
• [U-Boot] [PATCH 0/6] Blackfin fixes for 2009.08   Mike Frysinger
• [U-Boot] [PATCH 1/6] Blackfin: bump up default JTAG console timeout   Mike Frysinger
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Mike Frysinger
• [U-Boot] [PATCH 2/6] Blackfin: bf533-stamp/bf537-stamp: fix env settings for SPI flash   Mike Frysinger
• [U-Boot] [PATCH 3/6] Blackfin: bf548-ezkit: bump up monitor size   Mike Frysinger
• [U-Boot] [PATCH 4/6] Blackfin: enable -O2 in lib_generic/ for ADI/Bluetechnix boards   Mike Frysinger
• [U-Boot] [PATCH 5/6] Blackfin: fix SPI flash speed define name   Mike Frysinger
• [U-Boot] [PATCH 6/6] Blackfin: move ALL += u-boot.ldr to blackfin_config.mk   Mike Frysinger
• [U-Boot] [PATCH] compiler.h: unify system ifdef cruft here   Mike Frysinger
• [U-Boot] [PATCH] usb: fix CONFIG_SYS_MPC83xx_USB_ADDR not defined error   Remy Bohmer
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Mike Frysinger
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Wolfgang Denk
• [U-Boot] Driver for SDHC controller on IMX27   alfred steele
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Eric Lammerts
• [U-Boot] Flash Errors in Building u-boot.2009.03 for mx31ads   Wolfgang Denk
• [U-Boot] Flash Errors in Building u-boot.2009.03 for mx31ads   Yong Yang
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] newbie question about patch to fix 'fatal: cannot describe'   Rainer Keller
• [U-Boot] [PATCH 1/6] sh7785lcr: fix out of tree build   Nobuhiro Iwamatsu
• [U-Boot] Flash Errors in Building u-boot.2009.03 for mx31ads   Yong Yang
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Kumar Gala
• [U-Boot] [PATCH] mpc83xx: set 64BIT_VSPRINTF for boards using nand_util   Kumar Gala
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Mike Frysinger
• [U-Boot] [PATCH 2/6 V2] sh: make the linker scripts more generic   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/6 V2] sh: unify linker script   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/6] sh: introduce clock framework   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/6] sh3/sh4: fix CONFIG_SYS_HZ to 1000   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/6] sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Johan
• [U-Boot] [PATCH] envcrc: extract default environment from target ELF files   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: drop old musb read/write prototypes   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add timeout via CONFIG_MUSB_TIMEOUT   Mike Frysinger
• [U-Boot] NAND FDT mapping on Canyonlands   Detlev Zundel
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Detlev Zundel
• [U-Boot] subscription for mailing u-boot updates   Detlev Zundel
• [U-Boot] newbie question about patch to fix 'fatal: cannot describe'   Detlev Zundel
• [U-Boot] Is EHCI HCD working on ARM, little-endian?   ikjn
• [U-Boot] U-boot support for AT91SAM7SE   abc xyz
• [U-Boot] [PATCH v3] compiler.h: unify system ifdef cruft here   Mike Frysinger
• [U-Boot] [PATCH] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] [PATCH] sh: Revised the build with newest compiler   Nobuhiro Iwamatsu
• [U-Boot] Comfortable U-boot debug in CodeWarrior   Kysilka Radek
• [U-Boot] [RFC/PATCH 1/2] Add menu Framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] MAKEALL, don't have other cross compile   xiangfu
• [U-Boot] [PATCH] envcrc: extract default environment from target ELF files   Wolfgang Denk
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Wolfgang Denk
• [U-Boot] Comfortable U-boot debug in CodeWarrior   Wolfgang Denk
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Kim Phillips
• [U-Boot] there is no need for uboot to use linux's mtd driver!   Scott Wood
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Wolfgang Denk
• [U-Boot] [PATCH] mpc83xx: set 64BIT_VSPRINTF for boards using nand_util   Kim Phillips
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Kim Phillips
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Kim Phillips
• [U-Boot] [PATCH] kallsyms: fix escaping of NUL char in strings   Mike Frysinger
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Richard Retanubun
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Wolfgang Denk
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Scott Wood
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Ben Warren
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Richard Retanubun
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Ben Warren
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Richard Retanubun
• [U-Boot] BDI3000 help needed   Nikhil Gupta
• [U-Boot] there is no need for uboot to use linux's mtd driver!   Mike Frysinger
• [U-Boot] there is no need for uboot to use linux's mtd driver!   Scott Wood
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Kumar Gala
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Kumar Gala
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Kim Phillips
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] BDI3000 help needed   David Hawkins
• [U-Boot] BDI3000 help needed   Wolfgang Denk
• [U-Boot] BDIxxxx and others...   ksi at koi8.net
• [U-Boot] BDIxxxx and others...   David Hawkins
• [U-Boot] BDIxxxx and others...   Leon Woestenberg
• [U-Boot] BDIxxxx and others...   David Hawkins
• [U-Boot] question on do_bootm()   J.Hwan.Kim
• [U-Boot] BDIxxxx and others...   Wolfgang Denk
• [U-Boot] BDIxxxx and others...   Wolfgang Denk
• [U-Boot] PATCH: Fixed PPC4xx debug compilation error in uic.c   Alessio Centazzo
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Nobuhiro Iwamatsu
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] onenand_ipl : need to cpu/arm_cortexa8/start.S   HeungJun Kim
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Wolfgang Denk
• [U-Boot] MX31 NAND Boot Patch - u-boot/next branch   Ulrich Gerster
• [U-Boot] MX31 NAND Boot Patch - u-boot/next branch   Wolfgang Denk
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Richard Retanubun
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Kumar Gala
• [U-Boot] [PATCH] uec: Fix compile warning   Kumar Gala
• [U-Boot] 83xx 85xx: UEC: Implicit declaration of function 'uec_standard_init'   Kumar Gala
• [U-Boot] [PATCH] uec: Fix compile warning   Kumar Gala
• [U-Boot] Comfortable U-boot debug in CodeWarrior   Kysilka Radek
• [U-Boot] BDIxxxx and others...   Jerry Van Baren
• [U-Boot] [PATCH] digsy mtc: Enable command line history.   Grzegorz Bernacki
• [U-Boot] [PATCH] [PATCH v2] remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] BDIxxxx and others...   ksi at koi8.net
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Scott Wood
• [U-Boot] BDIxxxx and others...   David Hawkins
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] PATCH: Fixed PPC4xx compilation warning in 4xx_enet.c   Alessio Centazzo
• [U-Boot] onenand_ipl : need to cpu/arm_cortexa8/start.S   Dirk Behme
• [U-Boot] Add WATCHDOG_REFRESH() inside nand write and read   Giulio Benetti
• [U-Boot] MX31 NAND Boot Patch - u-boot/next branch   Magnus Lilja
• [PATCH] 83xx: UEC: Added support for bitBang MII driver access to PHYs   Richard Retanubun
• [U-Boot] Failure to compile sa1100 boards   Kristoffer Ericson
• [U-Boot] [RFC] 83xx: uec: miiphybb: Added support for bitBang SMI and uec SMI enabled at the same time.   Richard Retanubun
• [U-Boot] [PATCH] [PATCH v2] remove _IO_BASE and KSEG1ADDR from board configuration files   Nobuhiro Iwamatsu
• [U-Boot] Failure to compile sa1100 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Scott Wood
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Wolfgang Denk
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Wolfgang Denk
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ilya Yanok
• [U-Boot] RFC Re: [PATCH 1/4] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Scott Wood
• [U-Boot] [PATCH] omap3: moved reset_cpu function to omap3   Minkyu Kang
• [U-Boot] Ristrutturazione, Imbiancature, Controsoffittature, Parquet...   ristrutturazione
• [U-Boot] Physician Mailing List in the USA   Stern | Debora
• [U-Boot] [PATCH] uec: Fix compile warning   Ben Warren
• [U-Boot] [PATCH] net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warning   Ben Warren
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Ben Warren
• [U-Boot] [PATCH] omap3: moved reset_cpu function to omap3   Minkyu Kang
• [U-Boot] Donation Offer   Rophina Meigh
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Dieter Kiermaier
• [U-Boot] How to port uboot Marvell PXA320 Zylonite board   sadanand.tavadare at wipro.com
• [U-Boot] howto get the nand flash enviroment variables in env_init ?   Manuel Sahm
• [U-Boot] PATCH: Fix examples for OMAP3 boards...   Michael Evans
• [U-Boot] howto get the nand flash enviroment variables in env_init ?   Guennadi Liakhovetski
• [U-Boot] MX31 NAND Boot Patch - u-boot/next branch   Ulrich Gerster
• [U-Boot] howto get the nand flash enviroment variables inenv_init ?   Manuel Sahm
• [U-Boot] [PATCH] NAND: redirect the pointer of bbt pattern to RAM   Mingkai Hu
• [U-Boot] Query on MAC address for OMAP3 boards   Pillai, Manikandan
• [U-Boot] PATCH add rgb555 for at91   Giulio Benetti
• [U-Boot] mcf54455 evb ethernet tx timeouts   Matthew Lear
• [U-Boot] howto get the nand flash enviroment variables inenv_init ?   Guennadi Liakhovetski
• [U-Boot] howto get the nand flash enviroment variables inenv_init ?   Manuel Sahm
• [U-Boot] Query on MAC address for OMAP3 boards   Mike Frysinger
• [U-Boot] mcf5445x watchdog support in U-Boot   Liew Tsi Chung-R5AAHP
• [U-Boot] Query on MAC address for OMAP3 boards   Wolfgang Denk
• [U-Boot] Merge Process   Cem Eliguzel
• [U-Boot] mcf5445x watchdog support in U-Boot   Matthew Lear
• [U-Boot] Merge Process   Wolfgang Denk
• [U-Boot] [PATCH] 8xxx: Fix PCI bus address setup for 36-bit configs   Kumar Gala
• [U-Boot] [PATCH] 86xx: Add CPU_TYPE_ENTRY support   Kumar Gala
• [U-Boot] How to port uboot Marvell PXA320 Zylonite board   Detlev Zundel
• [U-Boot] PATCH add rgb555 for at91   Detlev Zundel
• [U-Boot] PATCH add rgb555 for at91   Giulio Benetti
• [U-Boot] U-book and GPLv3? (fwd)   Wolfgang Denk
• [U-Boot] [PATCH] add support for C5000 thermostimulator   Giulio Benetti
• [U-Boot] [PATCH] add WATCHDOG_RESET() on nand write and read   Giulio Benetti
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Giulio Benetti
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v6] board support patch for phyCORE-MPC5200B-tiny   Grant Likely
• [U-Boot] U-book and GPLv3? (fwd)   Jon Smirl
• [U-Boot] OMAP3 pending patches   Dirk Behme
• [U-Boot] Merge Process   Cem Eliguzel
• [U-Boot] [PATCH-ARM] Bug-fix in drivers mtd nand Makefile   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] Merge Process   Wolfgang Denk
• [U-Boot] [PATCH v4 0/6] MX31: NAND boot for PDK boards.   Magnus Lilja
• [U-Boot] V3 Zoom hw reset   Tom Rix
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Tom Rix
• [U-Boot] [PATCH 2/3] I2C Add initial support for TWL4030   Tom Rix
• [U-Boot] [PATCH 3/3] TWL4030 Add power reset button   Tom Rix
• [U-Boot] [PATCH v4 0/6] MX31: NAND boot for PDK boards.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm nomadik: rename board and cleanup config   Alessandro Rubini
• [U-Boot] Mac OS X Patches   Gary Carlson
• [U-Boot] howto get the nand flash enviroment variables inenv_init ?   Scott Wood
• [U-Boot] [PATCH] [PATCH v2] remove _IO_BASE and KSEG1ADDR from board configuration files   Andy Fleming
• [U-Boot] U-book and GPLv3? (fwd)   Jerry Van Baren
• [U-Boot] Mac OS X Patches   Ben Warren
• [U-Boot] U-book and GPLv3? (fwd)   Grant Likely
• [U-Boot] "nand biterr" ... got an implementation?   David Brownell
• [U-Boot] Problem with memcpy on ppc8536   Liu Dave-R63238
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   David Brownell
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Ben Warren
• [U-Boot] PATCH: bugfix for nand erase failure with bad blocks   Michele De Candia (VT)
• [U-Boot] [PATCH 1/2] sf: sst: fix sector size   Mike Frysinger
• [U-Boot] [PATCH 2/2] sf: sst: add sst25vf###b ids   Mike Frysinger
• [U-Boot] [patch] rm9200 ethernet driver: board-specific quirk (csb337)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] How to port uboot Marvell PXA320 Zylonite board   Prafulla Wadaskar
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Prafulla Wadaskar
• [U-Boot] PATCH add rgb555 for at91   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Dieter Kiermaier
• [U-Boot] how to build a U-Boot forU-boot for STR710FZ2T6   Ansujit
• [U-Boot] How to port uboot Marvell PXA320 Zylonite board   Prafulla Wadaskar
• [U-Boot] how to build a U-Boot forU-boot for STR710FZ2T6   Ansujit
• [U-Boot] [PATCH v4 0/6] MX31: NAND boot for PDK boards.   Ulrich Gerster
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Dieter Kiermaier
• [U-Boot] [PATCH v4 0/6] MX31: NAND boot for PDK boards.   Magnus Lilja
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Prafulla Wadaskar
• [U-Boot] V3 Zoom hw reset   Heiko Schocher
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] envcrc: extract default environment from target ELF files   Mike Frysinger
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Dieter Kiermaier
• [U-Boot] ENV_IS_EMBEDDED vs CONFIG_ENV_IS_EMBEDDED   Mike Frysinger
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Prafulla Wadaskar
• [U-Boot] Marvell Kirkwood newbie question GPIO functions   Dieter Kiermaier
• [U-Boot] PATCH add rgb555 for at91   Giulio Benetti
• [U-Boot] How to add new files in uboot   sadanand.tavadare at wipro.com
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   André Schwarz
• [U-Boot] [PATCH] mpc8xxx: USB: fix: access of ehci struct elements   Vivek Mahajan
• [U-Boot] how to build a U-Boot forU-boot for STR710FZ2T6   Wolfgang Denk
• [U-Boot] [PATCH] fsl: remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Scott Wood
• [U-Boot] [PATCH] [PATCH v2] remove _IO_BASE and KSEG1ADDR from board configuration files   André Schwarz
• [U-Boot] Question regarding FPGA firmware load in u-boot   Dieter Kiermaier
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 2/2] Add support for the Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] u-boot & gdb   Paul Thomas
• [U-Boot] [PATCH] [PATCH v2] remove _IO_BASE and KSEG1ADDR from board configuration files   Kim Phillips
• [U-Boot] [PATCH] [PATCH v2] remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] [PATCH v3] remove _IO_BASE and KSEG1ADDR from board configuration files   Timur Tabi
• [U-Boot] [PATCH v3] remove _IO_BASE and KSEG1ADDR from board configuration files   Kim Phillips
• [U-Boot] [PATCH] arm nomadik: use 1000 as HZ value and rewrite timer code   Alessandro Rubini
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Wolfgang Denk
• [U-Boot] [PATCH-ARM 2/2] Add support for the Embest SBC2440-II Board   Wolfgang Denk
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] iMX27 PDK board support   alfred steele
• [U-Boot] iMX27 PDK board support   alfred steele
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Wolfgang Denk
• [U-Boot] [PATCH] arm nomadik: rename board and cleanup config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] Question regarding FPGA firmware load in u-boot   André Schwarz
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [STATUS] Summer break   Wolfgang Denk
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Menon, Nishanth
• [U-Boot] [PATCH 3/3] TWL4030 Add power reset button   Menon, Nishanth
• [U-Boot] [PATCH 2/3] I2C Add initial support for TWL4030   Menon, Nishanth
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2 V2] ARM: Don't include libgcc anymore   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] config.mk: Remove $(PCI_CLOCK) reference   Shinya Kuribayashi
• [U-Boot] [PATCH] config.mk: Remove unused HPATH   Shinya Kuribayashi
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Mike Frysinger
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Mike Frysinger
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 1/6] ARM1136: Introduce CONFIG_PRELOADER macro.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 2/6] MX31: Add NAND SPL for i.MX31.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 3/6] ARM: Add macros.h to be used in assembler file.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 4/6] i.MX31: Create a common device file.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Mike Frysinger
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/7] serial_mx31: allow it to work with mx27 too and rename to serial_mxc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Mike Frysinger
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] Create the S5PC100 SoC code under the cpu/arm_cortesa8/   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Nishanth Menon
• [U-Boot] [PATCH v6] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Mike Frysinger
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] V3 Zoom hw reset   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Menon, Nishanth
• [U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Urgent Information from Google ***Congratulations!!!***   Googlelotto at googlemail.com
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] Problem building tools directory   Gary Carlson
• [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM920T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH 5/7] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/7] imx27lite: add support for imx27lite board from LogicPD   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2 V2] ARM: Don't include libgcc anymore   Dirk Behme
• [U-Boot] [PATCH] Atmel LCD driver GUARDTIME fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] How to add new files in uboot   xiangfu
• [U-Boot] [PATCH 1/2] lcd: allow to not draw the logo when clearing the screen   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] lcd: add ANSI escape support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: drop old musb read/write prototypes   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: add timeout via CONFIG_MUSB_TIMEOUT   Remy Bohmer
• [U-Boot] [PATCH] mpc8xxx: USB: fix: access of ehci struct elements   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: add timeout via CONFIG_MUSB_TIMEOUT   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add timeout via CONFIG_MUSB_TIMEOUT   Mike Frysinger
• [U-Boot] request   徐建辉
• [U-Boot] Question regarding FPGA firmware load in u-boot   Dieter Kiermaier
• [U-Boot] [PATCH] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] Relocating to my code.   prathika
• [U-Boot] ARM mach-types.h sync request   Daniel Gorsulowski
• [U-Boot] Question regarding FPGA firmware load in u-boot   André Schwarz
• [U-Boot] [PATCH] Atmel LCD driver GUARDTIME fix   Anatolij Gustschin
• [U-Boot] Question regarding FPGA firmware load in u-boot   Dieter Kiermaier
• [U-Boot] Question regarding FPGA firmware load in u-boot   André Schwarz
• [U-Boot] [PATCH 0/4 v2] Clean up the Nomadik board and add OneNand   Alessandro Rubini
• [U-Boot] [PATCH 1/4 v2] arm nomadik: rename board to nhk8815   Alessandro Rubini
• [U-Boot] [PATCH 2/4 v2] arm nomadik: cleanup reset   Alessandro Rubini
• [U-Boot] [PATCH 3/4 v2] arm nomadik: allow Nand and OneNand to coexists   Alessandro Rubini
• [U-Boot] [PATCH 4/4 v2] arm nomadik: use 1000 as HZ value and rewrite timer code   Alessandro Rubini
• [U-Boot] Question regarding FPGA firmware load in u-boot   Dieter Kiermaier
• [U-Boot] Question regarding FPGA firmware load in u-boot   Dieter Kiermaier
• [U-Boot] NAND FDT mapping on Canyonlands   Stefan Roese
• [U-Boot] show_boot_progess @ ppc not working   André Schwarz
• [U-Boot] [PATCH] ppc4xx: Fix FDT EBC mappings on Canyonlands   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Fix FDT EBC mappings on Canyonlands   Stefan Roese
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Ulrich Gerster
• [U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   Dieter Kiermaier
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   André Schwarz
• [U-Boot] [PATCH] ppc4xx: Fix FDT EBC mappings on Canyonlands   Felix Radensky
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   Dieter Kiermaier
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   André Schwarz
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   Dieter Kiermaier
• [U-Boot] [PATCH 1/3] factor out common code for matrix vision boards   André Schwarz
• [U-Boot] [PATCH 2/3] minor fixes for mvBC-P (MPC5200)   André Schwarz
• [U-Boot] [PATCH 3/3] minor fixes for mvBL-M7 and use of common code   André Schwarz
• [U-Boot] FW: [plagnioj at jcrosoft.com: [RFC PATCH 1/6] integratorap: splitpci support]   Peter Pearse
• [U-Boot] Mips, U-Boot and ramdisk   Robert Hodaszi
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   Dieter Kiermaier
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] [PATCH] kirkwood_egiga.c: fix build error   Prafulla Wadaskar
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Haavard Skinnemoen
• [U-Boot] [PATCH] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   André Schwarz
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Peter Tyser
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   Dieter Kiermaier
• [U-Boot] Flashing u-boot and X-loader on OMAP Zoom2   Vivek Kutal
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Haavard Skinnemoen
• [U-Boot] Kirkwood (Sheevaplug) ping crashes(?) U-Boot   Dieter Kiermaier
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Scott Wood
• [U-Boot] [PATCH 1/2 V2] Move libgcc inclusion from common Makefile to platform configs files   Scott Wood
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Scott Wood
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Scott Wood
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Scott Wood
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Scott Wood
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] [PATCH] nand_init: use loff_t for offset   Scott Wood
• [U-Boot] Access JFFS2 partition from U-Boot   Scott Wood
• [U-Boot] [PATCH 2/2] nand_spl: read environment early, when booting from NAND using nand_spl   Scott Wood
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Scott Wood
• [U-Boot] U-boot partition size information   Nathan French
• [U-Boot] [PATCH 1/4] api_examples/Makefile: Split up variable declarations   Peter Tyser
• [U-Boot] [PATCH 2/4] api_examples/Makefile: Combine ELF and BIN targets   Peter Tyser
• [U-Boot] [PATCH 3/4] api_examples/Makefile: Get rid of unnecessary intermediate LIB target   Peter Tyser
• [U-Boot] [PATCH 4/4] api_examples/Makefile: General cleanup   Peter Tyser
• [U-Boot] [PATCH 09/11] fsl_dma: Move dma function prototypes to common header file   Peter Tyser
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Scott Wood
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] Bug-fix in drivers mtd nand Makefile   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] link error in MPC8313ERDB_NAND_33_config or MPC8313ERDB_NAND_66_config   wanjiutuan
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] Problem with uboot booting image   Rahanesh
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Haavard Skinnemoen
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Haavard Skinnemoen
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Dieter Kiermaier
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Dieter Kiermaier
• [U-Boot] PATCH: Fixed PPC4xx debug compilation error in uic.c   Stefan Roese
• [U-Boot] PATCH: Fixed PPC4xx compilation warning in 4xx_enet.c   Stefan Roese
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ppc4xx: Fix FDT EBC mappings on Canyonlands   Stefan Roese
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Dieter Kiermaier
• [U-Boot] Mips, U-Boot and ramdisk   Detlev Zundel
• [U-Boot] Problem with uboot booting Linux image   Rahanesh
• [U-Boot] PATCH add rgb555 for at91   Detlev Zundel
• [U-Boot] Mips, U-Boot and ramdisk   Matthew Lear
• [U-Boot] Mips, U-Boot and ramdisk   Robert Hodaszi
• [U-Boot] [PATCH] at91: Add esd gmbh MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] Mips, U-Boot and ramdisk   Robert Hodaszi
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Sedji Gaouaou
• [U-Boot] udelay   Cem Eliguzel
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Dieter Kiermaier
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Stefan Roese
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] bootelf and vxWorks   Cem Eliguzel
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Dieter Kiermaier
• [U-Boot] [PATCH 1/4] api_examples/Makefile: Split up variable declarations   Rafal Jaworowski
• [U-Boot] Patch to boot over USB cable on OMAP3EVM   Brian Silverman
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Mips, U-Boot and ramdisk   Robert Hodaszi
• [U-Boot] [PATCH 1/3] A320: driver for FTMAC100 ethernet controller   Po-Yu Chuang
• [U-Boot] [PATCH 2/3] A320: driver for FTRTC010 real time clock   Po-Yu Chuang
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Shinya Kuribayashi
• [U-Boot] R: USB EHCI driver   Rendine Francesco
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.   Tom
• [U-Boot] [PATCH 1/2] pxa: add clock for system bus 2 arbiter   Daniel Mack
• [U-Boot] [PATCH 2/2] pxa: fix CKEN_B register bits   Daniel Mack
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Shinya Kuribayashi
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Scott Wood
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] [PATCH] config.mk: Remove unused HPATH   Detlev Zundel
• [U-Boot] [PATCH 7/7] imx27lite: add support for imx27lite board from LogicPD   Detlev Zundel
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Mike Frysinger
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] MPC8360ERDK U-Boot - Broadcom Gigabit Ethernet removal   cmfairfa at rockwellcollins.com
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC Ethernet controller on i.MX27   Bill Cook
• [U-Boot] link error in MPC8313ERDB_NAND_33_config or MPC8313ERDB_NAND_66_config   Scott Wood
• [U-Boot] [PATCH 1/2] arm: add usb-phy init support for Kirkwood SoCs   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] usb: add Kirkwood ehci driver support   Prafulla Wadaskar
• [U-Boot] U-book and GPLv3? (fwd)   Scott Wood
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] Add WATCHDOG_REFRESH() inside nand write and read   Scott Wood
• [U-Boot] [PATCH-ARM] Bug-fix in drivers mtd nand Makefile   Scott Wood
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Magnus Lilja
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Stelian Pop
• [U-Boot] MPC8360ERDK U-Boot - Broadcom Gigabit Ethernet removal   cmfairfa at rockwellcollins.com
• [U-Boot] Device tree on ppc board   Olivier DAVID
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Device tree on ppc board   Scott Wood
• [U-Boot] [PATCH 2/2 v4] KB9202: Add NAND support   Scott Wood
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-Boot timer example crashes on EP88xC   Mikhail Zaturenskiy
• [U-Boot] [PATCH 5/7] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   alfred steele
• [U-Boot] [PATCH 3/3] minor fixes for mvBL-M7 and use of common code   Kim Phillips
• [U-Boot] 88e61xx driver in u-boot   Andrew Dyer
• [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] A320: driver for FTRTC010 real time clock   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ppc4xx: Fixed PPC4xx debug compilation error in uic.c   Alessio Centazzo
• [U-Boot] [PATCH] ppc4cc: Fixed compilation warning in 4xx_enet.c   Alessio Centazzo
• [U-Boot] [PATCH] mpc83xx: USB: fix: access of ehci struct elements   Vivek Mahajan
• [U-Boot] [PATCH 2/3] A320: driver for FTRTC010 real time clock   Po-Yu Chuang
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] R: USB EHCI driver   Prafulla Wadaskar
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Sedji Gaouaou
• [U-Boot] uboot 2009 for Freescale mpc5121   Stas Desyatnlkov
• [U-Boot] 88e61xx driver in u-boot   Prafulla Wadaskar
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Sedji Gaouaou
• [U-Boot] Relocating to my code.   Detlev Zundel
• [U-Boot] ARM920T SMDK2440 support   J.Hwan.Kim
• [U-Boot] [PATCH] xscale: add support for the polaris board   Stefano Babic
• [U-Boot] [PATCH 2/3] A320: driver for FTRTC010 real time clock   Detlev Zundel
• [U-Boot] R: USB EHCI driver   Detlev Zundel
• [U-Boot] R: R: USB EHCI driver   Rendine Francesco
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] [PATCH] config.mk: Remove unused HPATH   Shinya Kuribayashi
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] mcf5445x watchdog support in U-Boot   Matthew Lear
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-Boot timer example crashes on EP88xC   Detlev Zundel
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Detlev Zundel
• [U-Boot] uboot 2009 for Freescale mpc5121   Detlev Zundel
• [U-Boot] ARM920T SMDK2440 support   Detlev Zundel
• [U-Boot] Relocating to my code.   Detlev Zundel
• [U-Boot] U-Boot timer example crashes on EP88xC   Mikhail Zaturenskiy
• [U-Boot] U-book and GPLv3? (fwd)   Matthew Lear
• [U-Boot] [PATCH 3/3] minor fixes for mvBL-M7 and use of common code   André Schwarz
• [U-Boot] 88e61xx driver in u-boot   Andrew Dyer
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] [PATCH 2/2 v5] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] ARM920T SMDK2440 support   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] U-Boot timer example crashes on EP88xC   Detlev Zundel
• [U-Boot] [PATCH 3/3] minor fixes for mvBL-M7 and use of common code   Kim Phillips
• [U-Boot] U-book and GPLv3? (fwd)   Scott Wood
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Jon Smirl
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Scott Wood
• [U-Boot] U-book and GPLv3? (fwd)   Grant Likely
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Jon Smirl
• [U-Boot] [PATCH 2/2 v5] KB9202: Add NAND support   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Enable CONFIG_SYS_64BIT_VSPRINTF.   Scott Wood
• [U-Boot] [PATCH] nand_spl: Fix cmd_ctrl usage in nand_boot.c.   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Enable CONFIG_SYS_64BIT_VSPRINTF.   Kim Phillips
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 1/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 2/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 3/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM, MTD] Add support for Embest SBC2440-II Board 4/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 5/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM, MTD] Add support for Embest SBC2440-II Board 6/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 7/7   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] EHCI and OHCI deriver in u-boot-2009.03   xiaoguizi007
• [U-Boot] hi, I could not understand the memsize.c, somebody help me?   IaMaPlAyEr
• [U-Boot] Relocating to my code.   prathika
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] Uboot and ARM SMP support   Sudeep K N
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] Uboot and ARM SMP support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] sh: Add support ESPT-GIGA borad   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: sh_eth: Remove garbage from printf   Nobuhiro Iwamatsu
• [U-Boot] Uboot and ARM SMP support   Sudeep K N
• [U-Boot] [PATCH 1/6] S5PC100: Samsung S5PC100 SoC support   HeungJun Kim
• [U-Boot] [PATCH 2/6] S5PC100: SMDKC100 Board support   HeungJun Kim
• [U-Boot] [PATCH 3/6] S5PC100: serial driver for SMDKC100 support   HeungJun Kim
• [U-Boot] Uboot and ARM SMP support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/6] S5PC100: onenand driver for SMDKC100 support   HeungJun Kim
• [U-Boot] [PATCH 5/6] S5PC100: MTD: change env_address type   HeungJun Kim
• [U-Boot] [PATCH 6/6] S5PC100: Add onenand_ipl for SMDKC100 support   HeungJun Kim
• [U-Boot] How to use OHCI and EHCI driver in u-boot at the same time?   xiaoguizi007
• [U-Boot] Uboot and ARM SMP support   Sudeep K N
• [U-Boot] Uboot and ARM SMP support   Nishanth Menon
• [U-Boot] U-book and GPLv3? (fwd)   Thomas Doerfler
• [U-Boot] [PATCH] s3c64xx: move the reset_cpu function   Minkyu Kang
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] Trouble "booting using board info"   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 3/7   Detlev Zundel
• [U-Boot] Uboot and ARM SMP support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] hi, I could not understand the memsize.c, somebody help me?   Detlev Zundel
• [U-Boot] Relocating to my code.   Detlev Zundel
• [U-Boot] Uboot and ARM SMP support   Pandita, Vikram
• [U-Boot] Uboot and ARM SMP support   Sudeep K N
• [U-Boot] [PATCH 5/6] S5PC100: MTD: change env_address type   Kyungmin Park
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Detlev Zundel
• [U-Boot] Uboot and ARM SMP support   Shilimkar, Santosh
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] Uboot and ARM SMP support   Nishanth Menon
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] "Bad Data CRC" after ramdisk size increase   Mikhail Zaturenskiy
• [U-Boot] "Bad Data CRC" after ramdisk size increase   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] [PATCH] at91: Introduction of at91sam9g10 SOC.   Sedji Gaouaou
• [U-Boot] Uboot and ARM SMP support   Tom
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] Uboot and ARM SMP support   Dirk Behme
• [U-Boot] Uboot and ARM SMP support   Peter Pearse
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christian de Rivaz
• [U-Boot] Trouble "booting using board info"   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] U-book and GPLv3? (fwd)   Chris Morgan
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] Uboot and ARM SMP support   Nishanth Menon
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Thomas Doerfler
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christian de Rivaz
• [U-Boot] U-book and GPLv3? (fwd)   Scott Wood
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] [MailServer Notification]Content Filtering Notification   Administrator
• [U-Boot] U-book and GPLv3? (fwd)   Scott Wood
• [U-Boot] [PATCH] Added preliminary support to EHCI USB FSL controller for platform MPC5121   Rendine Francesco
• [U-Boot] [MailServer Notification]Content Filtering Notification   Administrator
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christian de Rivaz
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] [MailServer Notification]Content Filtering Notification   Administrator
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christian de Rivaz
• [U-Boot] [PATCH 0/4 v2] Clean up the Nomadik board and add OneNand   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] csb337 board support (ARM at91rm9200)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] s3c64xx: move the reset_cpu function   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Uboot and ARM SMP support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] PATCH: Fix examples for OMAP3 boards...   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] Problem with uboot booting Linux image   Kim Phillips
• [U-Boot] link error in MPC8313ERDB_NAND_33_config or MPC8313ERDB_NAND_66_config   Kim Phillips
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jason Kridner
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] [PATCH 3/3] A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] Uboot and ARM SMP support   Shilimkar, Santosh
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Prafulla Wadaskar
• [U-Boot] U-book and GPLv3? (fwd)   Thomas Doerfler
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] [PATCH] ppc4xx: Fixed PPC4xx debug compilation error in uic.c   Stefan Roese
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Grazvydas Ignotas
• [U-Boot] [PATCH] ppc4cc: Fixed compilation warning in 4xx_enet.c   Stefan Roese
• [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out   Johnson Yu
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christian de Rivaz
• [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95,   null
• [U-Boot] Trouble "booting using board info"   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Stelian Pop
• [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board 1/7   Scott Wood
• [U-Boot] [PATCH 4/6] S5PC100: onenand driver for SMDKC100 support   Scott Wood
• [U-Boot] Manual relocation sucks.   Scott Wood
• [U-Boot] REQ: advice regarding u-boot config   Darius Augulis
• [U-Boot] [PATCH] Added preliminary support to EHCI USB FSL controller for platform MPC5121   Rendine Francesco
• [U-Boot] [PATCH] Added preliminary support to EHCI USB FSL controller for platform MPC5121   Rendine Francesco
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] REQ: advice regarding u-boot config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Device tree on ppc board   Kim Phillips
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Prafulla Wadaskar
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/RFC] Better I2C support for OMAP3   Hugo Vincent
• [U-Boot] [PATCH] xscale: add support for the polaris board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/RFC] Support HSMMC2 and 3 on OMAP3.   Hugo Vincent
• [U-Boot] [PATCH/RFC] Support Newhaven I2C character LCD modules   Hugo Vincent
• [U-Boot] [PATCH 4/6] S5PC100: onenand driver for SMDKC100 support   Kyungmin Park
• [U-Boot] Flex-OneNAND driver merged to mainline kernel   Amit Kumar Sharma
• [U-Boot] help required urgently for usbtty support in uboot   Naveen Kumar GADDIPATI
• [U-Boot] U-book and GPLv3? (fwd)   Thomas Doerfler
• [U-Boot] U-book and GPLv3? (fwd)   Thomas Doerfler
• [U-Boot] [PATCH] at91sam9260/9263: add back up fot the rst(reset controller).   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3][repost] nand: Add Marvell Kirkwood NAND driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] arm: add usb-phy init support for Kirkwood SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/RFC] Support HSMMC2 and 3 on OMAP3.   Minkyu Kang
• [U-Boot] [PATCH 1/2] arm: add usb-phy init support for Kirkwood SoCs   Nicolas Pitre
• [U-Boot] [PATCH 1/2] arm: add usb-phy init support for Kirkwood SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4 v2] arm nomadik: use 1000 as HZ value and rewrite timer code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Add esd gmbh MEESC board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   ksi at koi8.net
• [U-Boot] Kernel patch for CONFIG_LOGBUFFER   Evseev, Serguei
• [U-Boot] [PATCH V2] Support HSMMC2 and 3 on OMAP3   Hugo Vincent
• [U-Boot] [PATCH/RFC] Support HSMMC2 and 3 on OMAP3.   Hugo Vincent
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Dirk Behme
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Dirk Behme
• [U-Boot] show_boot_progess @ ppc not working   Heiko Schocher
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] S5PC100: Samsung S5PC100 SoC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/6] S5PC100: MTD: change env_address type   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH/RFC] Support Newhaven I2C character LCD modules   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 0/7][v3] Support for LogicPD i.MX27-LITEKIT development board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Dirk Behme
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Prafulla Wadaskar
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Dirk Behme
• [U-Boot] [PATCH 1/1] dm355/pm9261: add missing CONFIG_NET_MULTI   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] OMAP i2c and twl4030   Tom Rix
• [U-Boot] [PATCH 1/6] OMAP I2C Fix the sampling clock.   Tom Rix
• [U-Boot] [PATCH 2/6] TWL4030 Add initial support   Tom Rix
• [U-Boot] [PATCH 3/6] TWL4030 Add power reset button   Tom Rix
• [U-Boot] [PATCH 4/6] OMAP3 Move twl4030 power and led functions   Tom Rix
• [U-Boot] [PATCH 5/6] OMAP3 Move twl4030 mmc function   Tom Rix
• [U-Boot] [PATCH 6/6] OMAP3 Remove twl4030 defines   Tom Rix
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] How to thread a patch sequence?   Prafulla Wadaskar
• [U-Boot] OMAP i2c and twl4030   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] How to thread a patch sequence?   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] OMAP i2c and twl4030   Tom
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Grazvydas Ignotas
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] OMAP i2c and twl4030   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Fabio Estevam
• [U-Boot] [patch/rfc] rm9200 lowevel_init: don't touch reserved/readonly registers   David Brownell
• [U-Boot] [patch] csb337 board support (ARM at91rm9200)   David Brownell
• [U-Boot] [PATCH] at91: Add esd gmbh MEESC board support   Daniel Gorsulowski
• [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out   Johnson Yu
• [U-Boot] [PATCH] xscale: add support for the polaris board   stefano babic
• [U-Boot] U-book and GPLv3? (fwd)   Thomas Doerfler
• [U-Boot] [PATCH] at91: Add CAN init function   Daniel Gorsulowski
• [U-Boot] (no subject)   Krishna, Mahith
• [U-Boot] How to thread a patch sequence?   Prafulla Wadaskar
• [U-Boot] (no subject)   Nishanth Menon
• [U-Boot] mmc2 on OMAP sdp3430   Nishanth Menon
• [U-Boot] mmc2 on OMAP sdp3430   Krishna, Mahith
• [U-Boot] [PATCH] Kirkwood: add Marvell Sheevaplug gpio support   Dieter Kiermaier
• [U-Boot] EHCI and OHCI driver in u-boot   xiaoguizi007
• [U-Boot] mmc2 on OMAP sdp3430   Nishanth Menon
• [U-Boot] show_boot_progess @ ppc not working   André Schwarz
• [U-Boot] [PATCH] Kirkwood: add Marvell Sheevaplug gpio support   Dieter Kiermaier
• [U-Boot] hi, I could not understand the memsize.c, somebody help me?   IaMaPlAyEr
• [U-Boot] [PATCH] Kirkwood: add Marvell Sheevaplug gpio support   Dieter Kiermaier
• [U-Boot] show_boot_progess @ ppc not working   Heiko Schocher
• [U-Boot] [PATCH v3] arm nomadik: use 1000 as HZ value and rewrite timer code   Alessandro Rubini
• [U-Boot] Your e-mail address has won you US$4,600,000.00 online.   UK Lottery Organization
• [U-Boot] [PATCH] at91: Add esd gmbh MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH] zlib: updated to v.1.2.3   Giuseppe CONDORELLI
• [U-Boot] Kernel patch for CONFIG_LOGBUFFER   Detlev Zundel
• [U-Boot] [PATCH] at91: Add esd gmbh MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH] UBI: Fix build problem noticed on Apollon (arm/testing repo)   Stefan Roese
• [U-Boot] Compiling the latest u-boot-2009.06 with Cross-2.95, and errors came out   Detlev Zundel
• [U-Boot] Regarding Netconsole support   Thirumalai
• [U-Boot] hi, I could not understand the memsize.c, somebody help me?   Detlev Zundel
• [U-Boot] [PATCH 4/6] usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root   Michael Trimarchi
• [U-Boot] [PATCH] UBI: Fix build problem noticed on Apollon (arm/testing repo)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH1/2] Kirkwood: add Marvell Kirkwood gpio driver   Dieter Kiermaier
• [U-Boot] [PATCH2/2] Sheevaplug: Add Kirkwood gpio support to Sheevaplug   Dieter Kiermaier
• [U-Boot] [PATCH] mmc: set bus width to 1 and clock to minimum early during initialization   Ilya Yanok
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] U-book and GPLv3? (fwd)   Arno Fischer
• [U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix   Mark Jackson
• [U-Boot] U-book and GPLv3? (fwd)   Robin Getz
• [U-Boot] [PATCH 1/6] net: merge bugfix: Marvell Kirkwood gigabit ethernet driver   Prafulla Wadaskar
• [U-Boot] [PATCH v3 2/6] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH 3/6] arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support   Prafulla Wadaskar
• [U-Boot] [PATCH 4/6] usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root   Prafulla Wadaskar
• [U-Boot] [PATCH 5/6] usb: add Marvell Kirkwood ehci host controller driver   Prafulla Wadaskar
• [U-Boot] U-book and GPLv3? (fwd)   Frank Svendsbøe
• [U-Boot] [PATCH v5 6/6] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] How to thread a patch sequence?   Mike Frysinger
• [U-Boot] U-book and GPLv3? (fwd)   Mike Frysinger
• [U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/6] S5PC100: onenand driver for SMDKC100 support   Scott Wood
• [U-Boot] Undefined reference to'flash_sect_protect' in env_flash.c   Johnson Yu
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] Undefined reference to'flash_sect_protect' in env_flash.c   Detlev Zundel
• [U-Boot] [PATCH 4/6] usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root   Prafulla Wadaskar
• [U-Boot] Kernel patch for CONFIG_LOGBUFFER   Evseev, Serguei
• [U-Boot] [PATCH 4/6] usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root   Michael Trimarchi
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] Trouble "booting using board info"   Jerry Van Baren
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH 1/3] Blackfin: add cache_dump commands   Mike Frysinger
• [U-Boot] [PATCH 2/3] Blackfin: blackstamp: update spi flash settings   Mike Frysinger
• [U-Boot] [PATCH 3/3] Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-on   Mike Frysinger
• [U-Boot] mcf54455 evb ethernet tx timeouts   Liew Tsi Chung-R5AAHP
• [U-Boot] U-book and GPLv3? (fwd)   Robin Getz
• [U-Boot] [PATCH] Blackfin: TWI/I2C: fix pure writes   Mike Frysinger
• [U-Boot] [PATCH] at91: Add esd gmbh MEESC board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] [PATCH v3] arm nomadik: use 1000 as HZ value and rewrite timer code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] net: merge bugfix: Marvell Kirkwood gigabit ethernet driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] xscale: add support for the polaris board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] csb337 board support (ARM at91rm9200)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] csb337 board support (ARM at91rm9200)   David Brownell
• [U-Boot] [patch] csb337 board support (ARM at91rm9200)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] net: merge bugfix: Marvell Kirkwood gigabit ethernet driver   Ben Warren
• [U-Boot] [PATCH] xscale: add support for the polaris board   Ben Warren
• [U-Boot] [PATCH 4/6] S5PC100: onenand driver for SMDKC100 support   Kyungmin Park
• [U-Boot] U-book and GPLv3? (fwd)   Jerry Van Baren
• [U-Boot] hi, I could not understand the memsize.c, somebody help me?   IaMaPlAyEr
• [U-Boot] Need assistance with increasing command line size on Cavium   Garrett Cooper
• [U-Boot] There is no need to pay thousands for a good medical marketing list   Dianna ritual
• [U-Boot] [PATCH] MTD: change env_address type from unsigned long to loff_t   HeungJun Kim
• [U-Boot] [PATCH] Add pci E1000 Ethernet support for P2020 board   Roy Zang
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH 1/2] at91: Add CAN init function   Daniel Gorsulowski
• [U-Boot] [PATCH 2/2] at91: Add esd gmbh MEESC board support   Daniel Gorsulowski
• [U-Boot] [PATCH/RFC] Better I2C support for OMAP3   Heiko Schocher
• [U-Boot] Undefined reference to'flash_sect_protect' in env_flash.c   Johnson Yu
• [U-Boot] [PATCH 1/2 u-boot-next] Move libgcc inclusion from common Makefile to platform configs files   Stefan Roese
• [U-Boot] [PATCH 2/2 u-boot-next] ARM: Don't include libgcc anymore   Stefan Roese
• [U-Boot] [PATCH] xscale: add support for the polaris board   Stefano Babic
• [U-Boot] [PATCH] xscale: add support for the polaris board   Stefano Babic
• [U-Boot] [PATCH] xscale: fix USB initialization for Trizepsiv module   Stefano Babic
• [U-Boot] errno.h header -> asm-generic?   Michal Simek
• [U-Boot] Antw: Re: [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Ulrich Gerster
• [U-Boot] errno.h header -> asm-generic?   Stefan Roese
• [U-Boot] errno.h header -> asm-generic?   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] usb: mpc834x: added support of the MPH USB controller in addition to the DR one   Valeriy Glushkov
• [U-Boot] [PATCH 2/2] usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)   Valeriy Glushkov
• [U-Boot] [PATCH 09/11] fsl_dma: Move dma function prototypes to common header file   Kumar Gala
• [U-Boot] [PATCH] This patch adds support for Fujitsu MB86R01 'JADE' SOC   Matthias Weisser
• [U-Boot] [PATCH] Add suport for the graphic controller included in the JADE SOC   Matthias Weisser
• [U-Boot] [PATCH] Added support for splash screen positioning adding by adding   Matthias Weisser
• [U-Boot] [PATCH] Added support for jadecpu board using the MB86R01 'Jade' SOC from Fujitsu   Matthias Weisser
• [U-Boot] [PATCH 09/11] fsl_dma: Move dma function prototypes to common header file   Peter Tyser
• [U-Boot] [PATCH] 86xx: Add CPU_TYPE_ENTRY support   Kumar Gala
• [U-Boot] [PATCH] 8xxx: Fix PCI bus address setup for 36-bit configs   Kumar Gala
• [U-Boot] [PATCH] Add pci E1000 Ethernet support for P2020 board   Kumar Gala
• [U-Boot] Undefined reference to'flash_sect_protect' in env_flash.c   Detlev Zundel
• [U-Boot] [PATCH] asm-generic: Consolidate errno.h to asm-generic/errno.h   monstr at monstr.eu
• [U-Boot] hi, I could not understand the memsize.c, somebody help me?   Detlev Zundel
• [U-Boot] errno.h header -> asm-generic?   Michal Simek
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] Need assistance with increasing command line size on Cavium   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Jerry Van Baren
• [U-Boot] Regarding Netconsole support   Detlev Zundel
• [U-Boot] U-book and GPLv3? (fwd)   Detlev Zundel
• [U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix   Anatolij Gustschin
• [U-Boot] uboot iMX25 or iMX27   Johann Steinbrecher
• [U-Boot] uboot iMX25 or iMX27   Alan Carvalho de Assis
• [U-Boot] U-book and GPLv3? (fwd)   Eric Nelson
• [U-Boot] warnings from gcc-4.4 build   Kumar Gala
• [U-Boot] WINNING NOTIFICATION   Mrs.Jeneth Steel
• [U-Boot] [PATCH] arm: Kirkwood: Correct header define   Simon Kagstrom
• [U-Boot] [PATCH] arm: Kirkwood: Correct header define   Prafulla Wadaskar
• [U-Boot] U-book and GPLv3? (fwd)   Scott Wood
• [U-Boot] U-book and GPLv3? (fwd)   Robin Getz
• [U-Boot] [PATCH] MTD: change env_address type from unsigned long to loff_t   Scott Wood
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] Trouble "booting using board info"   Mikhail Zaturenskiy
• [U-Boot] [PATCH] flread: new command for reading indirect mapped flashes   Mike Frysinger
• [U-Boot] Trouble "booting using board info"   Jerry Van Baren
• [U-Boot] [PATCH] flread: new command for reading indirect mapped flashes   Mike Frysinger
• [U-Boot] [PATCH] xscale: fix USB initialization for Trizepsiv module   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] xscale: add support for the polaris board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH] Add support for Raidsonic ICYBOX NAS4220 board   Darius Augulis
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] U-book and GPLv3? (fwd)   Richard Stallman
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] Omap3 fix compiler warnings   Tom Rix
• [U-Boot] [PATCH 1/1] OMAP3 Fix compiler warning for v7_flush_dcache_all   Tom Rix
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-book and GPLv3? (fwd)   Robin Getz
• [U-Boot] [PATCH] arm: Kirkwood: Correct header define   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Scott Wood

Last message date: Tue Jun 30 23:22:45 CEST 2009
Archived on: Thu Apr 1 20:23:07 CEST 2010

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...