[U-Boot] [PATCH 3/4] mecp5123: fix build error

[Wolfgang Denk]

The mecp5123 board did not compile because the MSCAN Clock Control
Registers were missing; these got added, but as an array instead
of 4 individual registers. Adapt the code so it builds.

Signed-off-by: Wolfgang Denk <wd at denx.de>
Cc: Stefan Roese <sr at denx.de>
Cc: Reinhard Arlt <reinhard.arlt at esd-electronics.com>
---
Hello Mr. Arlt - with Stefan on vacation could you please be so kind
and test this on your mecp5123 board?  Thanks.  -- wd

 board/esd/mecp5123/mecp5123.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
index 909b458..bff96db 100644
--- a/board/esd/mecp5123/mecp5123.c
+++ b/board/esd/mecp5123/mecp5123.c
@@ -79,6 +79,7 @@ int board_early_init_f(void)
 {
 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr;
+	int i;
 
 	/*
 	 * Initialize Local Window for NOR FLASH access
@@ -129,14 +130,10 @@ int board_early_init_f(void)
 	/*
 	 * Configure MSCAN clocks
 	 */
-	out_be32(&im->clk.m1ccr, 0x00300000);
-	out_be32(&im->clk.m2ccr, 0x00300000);
-	out_be32(&im->clk.m3ccr, 0x00300000);
-	out_be32(&im->clk.m4ccr, 0x00300000);
-	out_be32(&im->clk.m1ccr, 0x00310000);
-	out_be32(&im->clk.m2ccr, 0x00310000);
-	out_be32(&im->clk.m3ccr, 0x00310000);
-	out_be32(&im->clk.m4ccr, 0x00310000);
+	for (i=0; i<4; ++i) {
+		out_be32(&im->clk.msccr[i], 0x00300000);
+		out_be32(&im->clk.msccr[i], 0x00310000);
+	}
 
 	/*
 	 * Configure GPIO's
-- 
1.6.0.6