[U-Boot] R: USB EHCI driver

Prafulla Wadaskar prafulla at marvell.com
Wed Jun 24 08:16:16 CEST 2009


Hi Francesco

Great Job!!!
I am in process doing the same for Marvell Kirkwood
Hopefully your patch will find useful for me

Regards...
Prafulla . .


> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Rendine Francesco
> Sent: Tuesday, June 23, 2009 8:32 PM
> To: Michael Trimarchi; Gupta Maneesh-B18878
> Cc: u-boot at lists.denx.de
> Subject: [U-Boot] R: USB EHCI driver
> 
> Hi all,
> 
> I'm successful in provide a preliminary support to EHCI USB 
> Freescale controller integrated on ADS5121 platform.
> I'm preparing a patch to submit to u-boot mailing list.
> 
> Regards,
> Francesco.
> 
> 
> -----Messaggio originale-----
> Da: Michael Trimarchi [mailto:trimarchi at gandalf.sssup.it]
> Inviato: gio 4/9/2009 7:50
> A: Gupta Maneesh-B18878
> Cc: Rendine Francesco; u-boot at lists.denx.de
> Oggetto: Re: [U-Boot] USB EHCI driver
>  
> Hi,
> 
> Gupta Maneesh-B18878 wrote:
> > Hi Francesco,
> >
> > Could you make any progress?
> >
> > Regards
> > Maneesh
> >  
> >
> >   
> >> -----Original Message-----
> >> From: u-boot-bounces at lists.denx.de
> >> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Michael 
> Trimarchi
> >> Sent: Monday, March 23, 2009 2:46 PM
> >> To: Rendine Francesco
> >> Cc: u-boot at lists.denx.de
> >> Subject: Re: [U-Boot] USB EHCI driver
> >>
> >> Hi,
> >>
> >> Rendine Francesco wrote:
> >>     
> >>> Hi,
> >>>
> >>> I've already tried that define, but nothing is changed...
> >>> What can I see in the USB driver to resolve issue?
> >>>
> >>> Thanks.
> >>>
> >>> -----Original Message-----
> >>> From: Michael Trimarchi [mailto:trimarchi at gandalf.sssup.it]
> >>> Sent: Fri 3/20/2009 9:36 AM
> >>> To: Rendine Francesco
> >>> Cc: u-boot at lists.denx.de
> >>> Subject: Re: [U-Boot] USB EHCI driver
> >>>
> >>> Hi,
> >>>
> >>> FrancescoVT wrote:
> >>>       
> >>>> usb_control_msg: request: 0x6, requesttype: 0x80, value
> >>>>         
> >> 0x100 index
> >>     
> >>>> 0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, 
> >>>> length=64, req=1ffea214
> >>>> req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0
> >>>>         
> >> EHCI fail
> >>     
> >>>> timeout STD_ASS reset
> >>>> usb_new_device: usb_get_descriptor() failed
> >>>>  
> >>>>         
> >>> #define CONFIG_LEGACY_USB_INIT_SEQ
> >>>
> >>> Michael
> >>>
> >>>
> >>>
> >>>       
> >> Sorry I can't help you without the board :( and now I don't have 
> >> another board to test to verify it. I'm working on 
> android, and some 
> >> migor issue.
> >>
> >> Michael
> >> _______________________________________________
> >> U-Boot mailing list
> >> U-Boot at lists.denx.de
> >> http://lists.denx.de/mailman/listinfo/u-boot
> >>
> >>
> >>     
> >
> >   
> I don't ask anymore because I'm busy, BTW good question
> 
> Michael
> 
> 


More information about the U-Boot mailing list