[U-Boot] [PATCH v3] remove _IO_BASE and KSEG1ADDR from board configuration files

[Kim Phillips]

On Fri, 19 Jun 2009 14:10:52 -0500
Timur Tabi <timur at freescale.com> wrote:

> The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet driver, but
> the code that used that macro was removed over a year ago, so board
> configuration files no longer need to define it.
> 
> The _IO_BASE macro is also automatically defined to 0 if it isn't already set,
> so there's no need to define that macro either in the board configuration files.
> 
> Signed-off-by: Timur Tabi <timur at freescale.com>
> Acked-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> Acked-by: Andy Fleming <afleming at freescale.com>
> Acked-by: Andre Schwarz <andre.schwarz at matrix-vision.de>
> ---

ack

Kim